Carbonyl emissions from heavy-duty diesel vehicle exhaust in China and the contribution to ozone formation potential

Fifteen heavy-duty diesel vehicles were tested on chassis dynamometer by using typical heavy duty driving cycle and fuel economy cycle. The air from the exhaust was sampled by 2,4- dinitrophenyhydrazine cartridge and 23 carbonyl compounds were analyzed by high performance liquid chromatography. The average emission factor of carbonyls was 97.2 mg/km, higher than that of light-duty diesel vehicles and gasoline-powered vehicles. Formaldehyde, acetaldehyde, acetone and propionaidehyde were the species with the highest emission factors. Main influencing factors for carbonyl emissions were vehicle type, average speed and regulated emission standard, and the impact of vehicle loading was not evident in this study. National emission of carbonyls from diesel vehicles exhaust was calculated for China, 2011, based on both vehicle miles traveled and fuel consumption. Carbonyl emission of diesel vehicle was estimated to be 45.8 Gg, and was comparable to gasolinepowered vehicles （58.4 Gg）. The emissions of formaldehyde, acetaldehyde and acetone were 12.6, 6.9, 3.8 Gg, respectively. The ozone formation potential of carbonyls from diesel vehicles exhaust was 537 mg O3/km, higher than 497 mg O3/km of none-methane hydrocarbons emitted from diesel vehicles.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

Fast increasing of surface ozone concentrations in Pearl River Delta characterized by a regional air quality monitoring network during 2006-2011

Based on the observation by a Regional Air Quality Monitoring Network including 16 monitoring stations, temporal and spatial variations of ozone(O3), NO2and total oxidant(Ox) were analyzed by both linear regression and cluster analysis. A fast increase of regional O3concentrations of 0.86 ppbV/yr was found for the annual averaged values from 2006 to 2011 in Guangdong, China. Such fast O3increase is accompanied by a correspondingly fast NOx reduction as indicated by a fast NO2 reduction rate of 0.61 ppbV/yr. Based on a cluster analysis, the monitoring stations were classified into two major categories – rural stations(non-urban) and suburban/urban stations. The O3concentrations at rural stations were relatively conserved while those at suburban/urban stations showed a fast increase rate of 2.0 ppbV/yr accompanied by a NO2 reduction rate of 1.2 ppbV/yr. Moreover, a rapid increase of the averaged O3 concentrations in springtime(13%/yr referred to 2006 level) was observed, which may result from the increase of solar duration, reduction of precipitation in Guangdong and transport from Eastern Central China. Application of smog production algorithm showed that the photochemical O3production is mainly volatile organic compounds(VOC)-controlled. However, the photochemical O3production is sensitive to both NOx and VOC for O3pollution episode. Accordingly, it is expected that a combined NOx and VOC reduction will be helpful for the reduction of the O3 pollution episodes in Pearl River Delta while stringent VOC emission control is in general required for the regional O3 pollution control.     

Quantitative method to determine the regional drinking water odorant regulation goals based on odor sensitivity distribution：Illustrated using 2-MIB

Taste and odor （T/O） in drinking water often cause consumer complaints and are thus regulated in many countries. However, people in different regions may exhibit different sensitivities toward WO. This study proposed a method to determine the regional drinking water odorant regulation goals （ORGs） based on the odor sensitivity distribution of the local population. The distribution of odor sensitivity to 2-methylisobomeol （2-MIB） by the local population in Beijing, China was revealed by using a normal distribution function/model to describe the odor complaint response to a 2-MIB episode in 2005, and a 2-MIB concentration of 12.9 ng/L and FPA （flavor profile analysis） intensity of 2.5 was found to be the critical point to cause odor complaints. Thus the Beijing ORG for 2-MIB was determined to be 12.9 ng/L. Based on the assumption that the local FPA panel can represent the local population in terms of sensitivity to odor, and that the critical FPA intensity causing odor complaints was 2.5, this study tried to determine the ORGs for seven other cities of China by performing FPA tests using an FPA panel from the corresponding city. ORG values between 12.9 and 31.6 ng/L were determined, showing that a unified ORG may not be suitable for drinking water odor regulations. This study presents a novel approach for setting drinking water odor regulations.     

Community structure and elevational diversity patterns of soil Acidobacteria

Acidobacteria is one of the most dominant and abundant phyla in soil,and was believed to have a wide range of metabolic and genetic functions. Relatively little is known about its community structure and elevational diversity patterns. We selected four elevation gradients from 1000 to 2800 m with typical vegetation types of the northern slope of Shennongjia Mountain in central China. The vegetation types were evergreen broadleaved forest,deciduous broadleaved forest,coniferous forest and sub-alpine shrubs. We analyzed the soil acidobacterial community composition,elevational patterns and the relationship between Acidobacteria subdivisions and soil enzyme activities by using the 16 S rRNA meta-sequencing technique and multivariate statistical analysis. The result found that 19 known subdivisions as well as an unclassified phylotype were presented in these forest sites,and Subdivision 6 has the highest number of detectable operational taxonomic units(OTUs). A significant single peak distribution pattern(P 0.05) between the OTU number and the elevation was observed. The Jaccard and Bray–Curtis index analysis showed that the soil Acidobacteria compositional similarity significantly decreased(P 0.01) with the increase in elevation distance. Mantel test analysis showed the most of the soil Acidobacteria subdivisions had the significant relationship(P 0.01) with different soil enzymes. Therefore,soil Acidobacteria may be involved in different ecosystem functions in global elemental cycles. Partial Mantel tests and CCA analysis showed that soil pH,soil temperature and plant diversity may be the key factors in shaping the soil Acidobacterial community structure.     

Characterization of extracellular polymeric substances in the biofilms of typical bacteria by the sulfur K-edge XANES spectroscopy

A combined approach of physicochemical extraction and sulfur K-edge X-ray absorption near-edge structure（XANES） spectroscopy was applied to characterize the extracellular polymeric substances（EPS） of typical bacterial biofilms in this study. Physicochemical analysis showed variation of the contents of DNA,polysaccharide and protein in different fractions of EPS in different mediums. The sulfur K-edge XANES analysis yielded a variety of spectra.Spectral fitting of the XANES spectra utilizing a large set of model compounds showed that there was more reduced sulfur in both LB-EPS（loosely bound EPS） and TB-EPS（tightly bound EPS） of all the biofilms in LB medium than in R2 A medium. More oxidized sulfur was identified in LB-EPS than that in TB-EPS,suggesting different niches and physiological heterogeneity in the biofilms. Our results suggested that the sulfur K-edge XANES can be a useful tool to analyze the sulfur speciation in EPS of biofilms.     

真菌LP-20对金属矿土壤镉锌的固定化作用研究

采用真菌分离纯化的方法从某重金属污染土壤中筛选分离出一株能够耐受并吸附二价镉、锌离子(Cd(Ⅱ)、Zn(Ⅱ))的真菌菌株LP-20。考察不同修复时间以及土壤p H值对固定化效率的影响。固定化效率以反应前后的镉锌有效态含量(利用TCLP提取液提取法测定)变化衡量。根据ITS(Internal transcribed spacer)r RNA基因测序结果,菌株LP-20属于Trichoderma spirale。LP-20对于Cd(Ⅱ)的固定效果普遍优于Zn(Ⅱ),并且对Cd(Ⅱ)的固定时间(10 d)少于对Zn(Ⅱ)的固定时间(20 d)。LP-20对于Cd(Ⅱ)和Zn(Ⅱ)的固定作用的最适宜p H范围为3~5。发现能够对土壤中镉锌离子具有良好固定化效果的真菌菌株对于发展土壤重金属污染的原位无毒无害化治理技术具有重要的实际意义。     

多级过滤技术在汽车工业废水处理尾水回用中的应用

某大型汽车厂设计采用多级过滤技术对工业废水处理尾水进行深度处理,再生后的中水回用于工业循环冷却水系统。介绍了多级过滤工艺的系统组成、工艺原理及处理效果。实际运行情况表明:采用多级过滤技术处理汽车工业废水处理后的尾水,系统运行稳定,出水水质良好,满足GB/T 19923—2005《再生水用作冷却用水的水质控制标准》的要求。     

南京市氮氧化物排放行业分布特征及减排对策

采用污染源普查资料与实地调查相结合的方法,对南京市各行业氮氧化物(NOx)排放源及排放量进行调查和梳理。结果表明:各行业NO x排放分担率依次为电力41%、机动车25%、钢铁10%、水泥9%、石化7%、其它工业5%、居民生活3%。针对南京市现状,对重点排放源提出了NO x减排措施与对策。     

电厂燃煤锅炉颗粒物分段去除效率及成因分析

选取某大型发电企业进行实测,根据测试数据计算颗粒物去除装置对颗粒物的分段去除效率。结果表明:静电除尘器除尘效率为99.91%、湿法脱硫装置除尘效率为60.51%、湿法脱硫装置出口相对静电除尘器进口的颗粒物去除效率为99.61%、湿法脱硫装置出口颗粒物浓度是静电除尘器出口颗粒物浓度的4.18倍。此外,也依据计算结果并结合实际情况分析了影响各除尘段颗粒物去除效率的主要成因,这些成因主要包括各除尘段功能、脱硫剂与脱硫副产品的颗粒物、脱硫装置运行平稳性等,期望本研究成果能对电厂燃煤锅炉大气污染控制设施关系调整、重新设计及大气环境污染治理思路调整提供重要科学依据与指导。