庐山植物园11种植物的根际土壤氮磷有效性和酶活性

通过比较不同种源植物的土壤理化性质与生物学活性的差异及根际效应,探讨不同种源植物对庐山酸性山地土壤的环境适应性。在庐山植物园内选择引种多年的11种不同种源的常绿树种,在生长季节中采集根际土和非根际土,测定有机碳含量、碱解氮及有效磷含量、脲酶和酸性磷酸酶活性,并分析各树种根际土壤氮磷养分及酶活性的根际效应。结果表明,（1）不同树种之间的根际土壤酸性磷酸酶（P〈0.01）、有效磷（P〈0.05）和碱解氮（P〈0.01）存在明显差异,而脲酶没有差异。（2）根际与非根际土壤氮磷有效性和酶活性表现出不同的特征,大部分树种根际土壤有效磷及酸性磷酸酶存在一定的根际效应（R/S〉1）,例如红花木莲Manglietia insignis、桂南木莲Manglietia chingii及云南拟单性木兰Parakmeria yunnanensis的根际与非根际土壤有效磷含量存在显著差异（P〈0.05）,红花木莲、桂南木莲、巴东木莲Manglietia patungensis、红茴香Illicium henryi及红皮糙果茶Camellia crapnelliana与乡土树种云锦杜鹃Rhododendron fortunei根际与非根际土壤酸性磷酸酶存在显著差异（P〈0.05）。但是,根际与非根际土壤碱解氮和脲酶差异不明显,有的甚至出现脲酶的根际负效应（R/S〈1）,如巴东木莲和红花木莲等树种根际土壤低于非根际土壤（P〈0.05）。（3）不同种源树种影响下的土壤有效磷和酸性磷酸酶的根际效应（R/S比值）明显,原产西南地区的树种如桂南木莲、云南拟单性木兰和巴东木莲与华南地区的红花木莲、红茴香等土壤有效磷的根际效应（R/S〉1.5）比原产华东亚热带地区的深山含笑Michelia maudiae和云锦杜鹃更明显,相应的酸性磷酸酶的根际效应也较高。土壤脲酶和碱解氮的根际效应却不明显。（4）土壤有机碳与碱解氮、有效磷和酸性磷酸酶存在显著正相关关系（P〈0.01）,土壤碱解氮与有效磷（P〈0.01）和酸性磷酸酶（P〈0.05）具显著正相关关系,酸性磷酸酶与pH值（P〈0.05）显著负相关,说明根际土壤有机物质的积累对根际微区的理化环境及根际土壤养分活性具有重要影响。     

食品烹调处理过程中砷的浓度、形态和生物可给性研究进展

食品作为人体砷暴露的主要途径,其砷的含量和形态备受关注。由于食品原料通常要经过烹饪加工后才会被人食用,因此,食品的烹调处理过程及方式对砷的形态及生物有效性的影响在砷的健康风险评价研究中,需要作为重要因素进行研究。通过综述不同食品烹调处理前后砷浓度、形态和生物可给性变化的相关研究,分析了砷变化的特征,探讨了相关机理,并得出如下结论:烹调处理能使食品中砷的浓度发生升高或降低;高温烹调能使食品中砷形态发生变化,目前研究结果确定的变化主要是砷甜菜碱的分解,烹调中食品砷形态变化的机理尚不明确。不同烹调方式下,食品中砷的生物可给性差异较大,砷的形态变化可能是其生物可给性差异的主要原因。烹调特别是高温烹调下食品砷浓度升高及形态变化导致的健康风险值得进一步关注。     

Gridded usage inventories of chlordane in China

Chlordane (1,2,4,5,6,7,8,8-octachloro-3a,4,7, 7a-tetra-hydro-4,7-methanoindane) is one of organochlorine pesticides (OCPs) which has been listed as one of the persistent organic pollutants (POPs) to be reduced and finally eliminated in the Stockholm Convention on Persistent Organic Pollutants, because of its great persistence, toxicity, bio-accumulation and long-range transport potential. It is critical to create a national chlordane usage inventories for China to compile chlordane emission inventories, which is helpful for carrying out risk assessments and other researches related to chlordane in China. The annual data of chlordane usage was calculated and modified in accordance with the reported annual production of chlordane which was caculated on the basis of the termite distribution, the data of chlordane usage rate and the annual new construction area (NCA).With the help of Geographic Information System, the usage data of this NCA were allocated to a grid system then, with a 1/4° longitude by 1/6° latitude resolution and a size for each grid cell of approximately 25 km by 25 km. Between 1988 and 2008, the total usage of chlordane in China was 2745 t, accounting for approximately 80% of the production in the same period. Zhejiang Province was the largest consumer of chlordane in China, whose usage adds up to 980 t, greatly exceeding other provinces/regions, followed by Jiangsu Province (534 t) and Sichuan Province (428 t). The region with the least usage of chlordane was Beijing. Provinces of Guizhou, Henan and Hebei did not use any chlordane, even though termites had occurred in these provinces. Gridded usage inventories showed that the intensive use of chlordane was concentrated in the southeast part of China, Yangtze River Delta and Pearl River Delta in particular. The satisfaction of the inventories was supported by the consistence between the estimated data of annual usage and the reported annual production of chlordane, and by the consistence between distribution pattern of chlordane’s usage and ambient air concentration.     

Emission factors of gaseous carbonaceous species from residential combustion of coal and crop residue briquettes

Experiments were performed to measure the emission factors (EFs) of gaseous carbonaceous species, such as CO₂, CO, CH₄, and non-methane volatile organic compounds (NMVOCs), from the combustion of five types of coal of varying organic maturity and two types of biomass briquettes under residential burning conditions. Samples were collected in stainless steel canisters and 2,4-dinitrophenylhydrazine (DNPH) cartridges and were analyzed by GC-FID/MS and HPLC, respectively. The EFs from crop residue briquette burning were generally higher than those from coals, with the exception of CO₂. The dominant NMVOC species identified in coal smoke were carbonyls (41.7%), followed by C2 unsaturated hydrocarbons (29.1%) and aromatics (12.1%), while C2 unsaturated hydrocarbons were the dominant species (68.9%) emitted from the combustion of crop residue briquettes, followed by aromatics (14.4%). A comparison of burning normal crop residues in stoves and the open field indicated that briquettes emitted a larger proportion of ethene and acetylene. Both combustion efficiency and coal organic maturity had a significant impact on NMVOC EFs from burning coal: NMVOC emissions increased with increasing coal organic maturity but decreased as the combustion efficiency improved. Emissions from the combustion of crop residue briquettes from stoves occurred mainly during the smoldering process, with low combustion efficiency. Therefore, an improved stove design to allow higher combustion efficiency would be beneficial for reducing emissions of carbonaceous air pollutants.     

PCDD/Fs emission, risk characterization, and reduction in China’s secondary copper production industry

Secondary copper production is one of the key polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) emission sources in China, but research and data on this issue are rare. In 2004, when the Stockholm Convention entered into force in China, PCDD/Fs emissions from secondary copper production contributed to 32.2% of the total release. In this paper, PCDD/Fs emission dynamics from secondary copper industry were discussed and cumulative risks were characterized. From 2004 to 2009, industrial policies played an indirect role in PCDD/Fs reduction, but its effects are still limited. The Yangtze River Delta, Pearl River Delta and central regions were among the top three of dioxin emissions from secondary copper production in China. Shanghai, Shandong, Zhejiang, and Jiangxi had comparatively higher accumulated risk and were recommended as the priority regions for promoting PCDD/Fs emission control in China. From 2009 to 2015, the PCDD/Fs emission dynamics in the secondary copper industry were presented through simulation. PCDD/Fs emission equations were established, resulting in the recommendation of control technology conversion rate at 30% for small scale smelters and 51%–57% for large and medium-sized enterprises in 2015. In conclusion, both indirect policy and direct control technology retrofitting should be integrated for more effective PCDD/Fs emission reduction in secondary copper industry.     

我国重工业企业烟气脱硫技术及存在的问题

为使企业在"十二五"期间达到SO2减排指标,总结出几种目前应用普遍,技术成熟,投资、运行成本较低的脱硫工艺,包括烟气脱硫的基本原理、主要设备、技术难点及存在的问题。供企业新建,改建或扩建脱硫系统借鉴。     

杂合抗菌肽LPCB在毕赤酵母中的表达条件优化

为获取能表达具有天然活性的杂合抗菌肽的重组酵母菌,确定其最佳表达条件,将构建好的重组酵母表达载体pPICZα-A-CecropinB(1～10)-Magainin2(1～12)(简称pPICZα-A-CBMA)和pPICZα-A-Lfcin-Pro-CecropinB(简称pPICZα-A-LPCB)经SacⅠ线性化处理,分别电转入巴斯德毕赤酵母Pichia pastoris X-33,利用抗生素Zeocin筛选阳性克隆,PCR扩增验证,甲醇诱导表达.采用抑菌圈法初步测定产物活性,优化杂合肽LPCB诱导时间、诱导剂浓度、诱导温度、培养基pH等表达条件,传代检测其质粒稳定性.结果显示,基因工程菌P.pastoris X-33/pPICZα-A-CBMA和P.pastoris X-33/pPICZα-A-LPCB成功构建.表达产物前者抑菌活性微弱,后者抑菌活性良好.杂合肽LPCB的最佳表达条件为:25℃,pH中性培养,每24 h添加0.5%(V/V,φ)甲醇,诱导表达72 h.重组酵母菌pPICZα-A-LPCB在培养超过100代后,未发生质粒丢失.     

微咸水膜下滴灌对白僵土盐碱地水盐特性及油葵生长的影响

为了解滴灌条件下不同微咸水矿化度及覆膜与否对盐碱地土壤水盐特性及油葵生长的影响,在宁夏平罗西大滩盐碱地进行不同灌水矿化度(0.2、1、2、3 g/L)膜下滴灌田间试验.结果表明,地膜覆盖比不覆盖处理土壤含水量高约2%,盐分表聚减缓,油葵株高、产量及其构成均高于不覆膜处理,产量最高增幅达82.5%;不同矿化度微咸水之间比较发现,利用矿化度为1 g/L的微咸水进行灌溉时,下层土壤含水量较高,微咸水滴灌不但没有为上层土壤带去过多盐分,反而由于土壤有一定的渗透性能,灌水将土壤上层盐分逐渐淋洗至下层.膜下滴灌微咸水矿化度为1 g/L时,油葵产量最大.因此在适宜条件、合理措施下,微咸水覆膜滴灌技术可以促进作物生长,确保作物产量,在淡水缺乏而微咸水较为丰富的盐碱地地区应积极推广利用.     

不对称还原丙酮酸乙酯菌株的筛选及鉴定

以丙酮酸乙酯为底物,从成都某化工厂污水池及其附近土壤中分离到36株可将丙酮酸乙酯不对称还原成(S)-乳酸乙酯的菌株.经过多次复筛,最终获得了一株具有较高催化活性的酵母菌BTY18-6.在以该菌株静息细胞为催化剂,催化不对称还原丙酮酸乙酯合成(S)-乳酸乙酯的反应中,底物浓度为60 mmol/L时,底物转化率为86.9%,产物(S)-乳酸乙酯的ee值为88.7%.通过对其形态学、生理生化特征及其26S rDNA Dl/D2区域的分析表明,BTY18-6为胶红酵母.     

Joint use of data and modeling in coastal wave transformation

In the framework of a research project entitled ??BRISA??BReaking waves and Induced SAnd transport??, a methodology was devised to characterize the waves joining together in-situ measurements and numerical wave propagation models. With this goal in mind, a number of in-situ measurements were made, for selected positions in front of Praia de Faro (South Portugal), during four days (25th to 28th March, 2009) by using different types of equipments (e.g., resistive wave gauges, pressure sensors, currentmeters and a new prototype pore pressure sensor using optical fibre). Wave records were obtained simultaneously offshore (at a water depth of 11.7?m below mean sea level, MSL) and at the surf and swash zones. The data processing and analysis were made by applying classical time domain techniques. Numerical simulations of the wave propagation between offshore and inshore for the measurement period were performed with two numerical models, a 1D model based on linear theory and a nonlinear Boussinesq-type model, COULWAVE, both forced by the measured offshore wave conditions of 27th March 2009. Comparisons between numerical results and field data for the pressure sensors placed in the surf and swash zones were made and discussed. This approach enables to evaluate the performance of those models to simulate those specific conditions, but also to validate the models by gaining confidence on their use in other conditions.