Changes in the sorption and rate of 17β-estradiol biodegradation by dissolved organic matter collected from different water sources

The potential biodegradation and subsequent transformation of 17β-estradiol (E2) to estrone (E1) were examined in the presence of various dissolved organic matter (DOM) isolated from effluent, river and lake waters. In addition, estrogenicity was estimated in association with the removal of E2 via its sorption onto DOM and biodegradation. The more biodegradable lake-derived DOM promoted more extensive transformation of E2 into E1 than the effluent organic matter through a biodegradation process. Overall, under all conditions, biodegradation dominated the removal of E2 in water. The increased dissolved organic carbon (DOC) concentrations in river and lake-derived DOM (e.g. 6.5 mg C L(-1)) reduced the removal of E2 by decreasing its biodegradation due to the moderate sorption of E2 onto DOM. The effluent organic matter showed greater removal of E2 via biodegradation, as well as significantly high sorption. This was associated with a large amount of hydrophobic fulvic acid (FA)- and humic acid (HA)-like organic components, as shown by the small increase in the specific UV absorbance at 254 nm (SUVA(254)). An increase in the DOC concentration reduced the removal of E2, resulting in high estrogenicity. The present study suggests that both organic composition and DOC concentration influenced the removal of E2 and, therefore, should be fully considered when assessing estrogenicity and its impacts on the aquatic environment.     

Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Chemical compositions and sources of atmospheric PM10 in heating, non-heating and sand periods at a coal-based city in northeastern China

Mass concentrations and chemical components (18 elements, 9 ions, organic carbon [OC] and elemental carbon [EC]) in atmospheric PM(10) were measured at five sites in Fushun during heating, non-heating and sand periods in 2006-2007. PM(10) mass concentrations varied from 62.0 to 226.3 μg m(-3), with 21% of the total samples' mass concentrations exceeding the Chinese national secondary standard value of 150 μg m(-3), mainly concentrated in heating and sand periods. Crustal elements, trace elements, water-soluble ions, OC and EC represented 20-47%, 2-9%, 13-34%, 15-34% and 13-25% of the particulate matter mass concentrations, respectively. OC and crustal elements exhibited the highest mass percentages, at 27-34% and 30-47% during heating and sand period. Local agricultural residuals burning may contribute to EC and ion concentrations, as shown by ion temporal variation and OC and EC correlation analysis. Heavy metals (Cr, Ni, Zn, Cu and Mn) from coal combustion and industrial processes should be paid attention to in heating and sand periods. The anion/cation ratios exhibited their highest values for the background site with the influence of stationary sources on its upper wind direction during the sand period. Secondary organic carbon were 1.6-21.7, 1.5-23.0, 0.4-17.0, 0.2-33.0 and 0.2-21.1 μg m(-3), accounting for 20-77%, 44-88%, 4-77%, 8-69% and 4-73% of OC for the five sampling sites ZQ, DZ, XH, WH and SK, respectively. From the temporal and spatial variation analysis of major species, coal combustion, agricultural residual burning and industrial emission including dust re-suspended from raw material storage piles were important sources for atmospheric PM(10) in Fushun at heating, non-heating and sand periods, respectively. It was confirmed by principal component analysis that coal combustion, vehicle emission, industrial activities, soil dust, cement and construction dust and biomass burning were the main sources for PM(10) in this coal-based city.     

Chlorinated and brominated dibenzo-p-dioxins and dibenzofurans in surface sediment from Taihu Lake, China

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in surface sediment samples from Taihu Lake--an important water supply of the Yangtze River Delta, China--were investigated in the present study. Concentrations of PCDD/Fs ranged from 0.91 to 4.8 pg TEQ g(-1) dw (mean: 2.9 pg TEQ g(-1) dw, TEQ: Toxic Equivalent), which were all higher than the threshold effect level established by interim sediment quality guidelines in Canada (0.85 pg TEQ g(-1) dw). The levels of PBDD/Fs ranged from 0.16 to 1.6 pg TEQ g(-1) dw (mean: 0.52 pg TEQ g(-1) dw) and accounted for 5-33% (mean: 14%) of the total PCDD/Fs and PBDD/Fs TEQ. Comparatively, the abundance of sedimentary PCDD/Fs in the three regions (Meiliang Bay, Gonghu Bay, and Xukou Bay) showed a decreasing trend from the inflow region to the outflow region, while no significant difference was observed among their 2,3,7,8-PBDD/Fs levels, which suggested that the sources of PCDD/Fs and PBDD/Fs differed in this area. Principal component analysis suggested that the historical production/usage of pentachlorophenol and sodium pentachlorophenate was the dominant source of PCDD/Fs in the sediment of these regions. Although the specific sources of PBDD/Fs in the sediment of Taihu Lake were unclear, it was suspected to be due to atmospheric deposition; however, an additional study is needed to confirm this.     

Ecological risk assessment of open coal mine area

The coal mine areas in China have the serious conflicts between resources exploitation and ecology safety, therefore the coal mine ecological risk assessment is an important problem which relates to the sustainability of coal mines to regions and the whole country. In this study, open coal mine area serves as researching object, heavy metals, soil erosion and coast are screened out as risk resources, soil wireworm as the receiver of heavy metals risk, biotope ecosystem as the receiver of soil erosion and coast risk; ecological indexes are calculated with species background index, biological diversity index and natural degree index, ecological friability indexes are calculated with soil fertility index, plant coverage, plant species diversity index, soil wireworm index and maturity index, and the typical coal mine area assessment indexes system is established. In addition, the regional ecological risk assessment is conducted on the friable ecological system of Fuxin Haizhou open coal mine area. Examples are researched of Haizhou open coal mine, the coal mine risk distribution is established, and foundations are provided for the administrative decision-making.     

抑制型电导-离子色谱法测定水中无机阴离子

采用抑制型电导-离子色谱法测定生活饮用水、污水和地表水中F-、Cl-、NO2-、Br-、NO3-、PO43-、SO42-等7种无机阴离子,对清洁水样过滤后直接测定,浑浊样品离心后取上清液过滤测定。F-在0.100 mg/L~1.20 mg/L范围内、其余6种阴离子在1.00 mg/L~12.0 mg/L范围内线性良好,方法检出限为0.031 mg/L~0.47 mg/L,水样平行测定的RSD为0.9%~1.8%,加标回收率为82.6%~110%。     

Fungal spores from Pleosporales in the atmosphere of urban and rural locations in Portugal

Fungal spores are a significant fraction of the atmospheric bioparticles (bioaerosols) and many species are capable of inducing the production of specific immunoglobulin E (IgE), aggravating the clinical symptoms of allergic respiratory diseases in sensitized individuals. The aim of this work was to evaluate the distribution of potentially allergenic Pleosporales spores in two locations with different urbanization indexes, characterizing its seasonal pattern. The seasonal distribution of several spore types belonging to the Pleosporales (Alternaria, Drechslera, Epicoccum, Paraphaeosphaeria, Pithomyces, Pleospora and Stemphylium) in Amares (rural area) and Porto (urban area) was continually studied from January 2005 to December of 2007, using Hirst-type volumetric spore traps. Alternaria was the most abundant fungal spore type found in the atmosphere of Amares and Porto. This fungal type, together with Drechslera, Epicoccum, Pithomyces and Stemphylium, was mainly present during summer. Nevertheless, Leptosphaeria, Pleospora and Venturia spores were detected during winter and spring, while Paraphaeosphaeria spores were also observed during summer and autumn. These different seasonal patterns were responsible for the expansion of the exposure period for the Alt a 1 allergen. The concentration of the studied spore types was higher in the rural area than in the urban one, with exception for Pleospora and Drechslera. According to the correlations with meteorological factors, the selected fungal spores can be divided into two groups: (i) Alternaria, Drechslera, Epicoccum, Pithomyces and Stemphylium presented positive correlations with temperature and negative correlations with relative humidity and rainfall; (ii) Leptosphaeria, Paraphaeosphaeria, Pleospora and Venturia presented a contrary behavior. Usually, the occurrence of the Alt a 1 allergen has been associated with the presence of airborne Alternaria spores; the present work follows the seasonal distribution of other fungal spore species known to contain this molecule. The widespread occurrence of Alt a 1 plays an important role in the incidence and aggravation of allergic disorders.     

Determination of total petroleum hydrocarbons (TPH) in agricultural soils near a petrochemical complex in Guangzhou,China

The total petroleum hydrocarbons (TPH) pollution in regional agricultural soils was investigated. Seventy soil samples collected from surface layers (0–20 cm) and horizons of five selected pedons in the vicinity of a petrochemical complex in Guangzhou, China were analyzed, and the vertical variation and spatial variability of TPH were evaluated. The TPH concentration in top soils around the petrochemical complex ranged from 1,179.3 to 6,354.9 mg kg^− 1, with the average of 2,676.6 mg kg^− 1. Furthermore, significant differences between land-use types showed that the TPH concentration in top soils was strongly influenced by accidental spills. Both the TPH trends in pedons and the identified hot-spot areas also showed that the accidental explosions or burning accidents were mainly responsible for the pollution. The results reported here suggest that the regular monitoring and inspection shall be conducted for safety and to avoid or minimize the accidents, and the effective measures should be taken to remediate the contaminated areas and to assure that the important industrialization of Guangzhou area would not mean human health risks near the petrochemical complex.     

Even sampling designs generation by charges repulsion simulation

Evenly distributed sampling design is generally considered as an efficient sampling design. It is widely used in sampling for the environmental survey. In this paper, we present a novel method for generating N evenly distributed samples within a given irregular polygon via simulating the movements of some ideal homogeneous point charges. Initially, charges are randomly put into the sampling region; then, they are freed and held orderly; and after enough runs, the charges will finally reach a stable state with all of them having a zero resultant force and velocity; and so they distribute evenly within the region. Their layout can thus be considered as an evenly distributed sampling design. The main advantages of this method are: (1) it is easy to understand and implement; (2) it is efficient in both running and generating better designs. Analysis and experimental results indicate that this method is an efficient and robust method for generating even sampling designs for 2D polygonal sampling region.