Aspects of biopsy procedures prior to preimplantation genetic diagnosis

Today, preimplantation genetic diagnosis (PGD) is offered in over 40 centres worldwide for an expanded range of genetic defects causing disease. This very early form of prenatal diagnosis involves the detection of affected embryos by fluorescent in situ hybridization (FISH) (sex determination or chromosomal defects) or by polymerase chain reaction (PCR) (monogenic diseases) prior to implantation. Genetic analysis of the embryos involves the removal of some cellular mass from the embryos (one or two blastomeres at cleavage-stage or some extra-embryonic trophectoderm cells at the blastocyst stage) by means of an embryo biopsy procedure. Genetic analysis can also be performed preconceptionally by removal of the first polar body. However, additional information is then often gained by removal of the second polar body and/or a blastomere from the embryo. Removal of polar bodies or cellular material from embryos requires an opening in the zona pellucida, which can be created in a mechanical way (partial zona dissection) or chemical way (acidic Tyrode's solution). However, the more recent introduction of laser technology has facilitated this step enormously. Different biopsy procedures at different preimplantation stages are reviewed here, including their pros and cons and their clinical applications. The following aspects will also be discussed: safety of zona drilling by laser, use of Ca²⁺/Mg²⁺-free medium for decompaction, and removal of one or two cells from cleavage-stage embryos. Copyright © 2001 John Wiley & Sons, Ltd.     

THE NEED FOR HIGH RESOLUTION TIME SERIES DATA TO CHARACTERIZE HAWAIIAN STREAMS1

ABSTRACT: Streams in the Hawaiian Islands differ from many streams on the U.S. mainland presenting unique challenges to investigators attempting to characterize Hawaiian streams. Hawaiian streams are short; watersheds are small and steep; and rain events are usually short in duration but intense. As a result, most streams in Hawai'i are flashy. Time scales for storm hydrographs in Hawai'i are on the order of hours instead of days and flash flooding is a common hazard. To characterize the streams we were investigating, we found it necessary to obtain streamflow and water quality measurements at relatively short time intervals. While this resolution resulted in large sometimes onerous quantities of data, we would have otherwise missed certain phenomena, such as 60‐fold flow changes in 15 minutes or 30‐fold turbidity changes in five minutes. Even at five‐minute intervals, we found that attempts to predict TSS using a relationship obtained from in situ turbidity were not always satisfactory. Depending on the precision required, either higher resolution measurements or in vitro turbidity measurements of the TSS samples might be necessary. Finally, these high resolution measurements enabled us to observe other cyclical events that might have been missed if the measurement intervals were greater than one hour.     

Magnetic fields of induction heaters in the framework of directive 2004/40/EC of the European Parliament and of the Council.

The spectrum and the polarization of the magnetic flux density (B-field) of 6 induction heaters and 1 arc oven were measured by means of a PMM (Italy) spectrum analyser. The spectrum analysis showed that no substantial harmonics were observed while the polarization analysis revealed that the operator's exposure was non-homogeneous within a distance of 1.5 m from the heater. When the distance was larger, the body was homogeneously exposed. In general we can state that the B-field strongly varied between heaters and that exposure exceeded the occupational reference levels recommended by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) (1998) and European Directive 2004/40/EC in 5 of the 7 heaters. Within the framework of the Directive some protection actions should be taken. Whereas mitigation of existing/old induction ovens is difficult, the design of new induction heaters and their housing should be based, among others, on electromagnetic reducing engineering concepts.     

Postnatal investigation of fetal renal disease

The antenatal ultrasound diagnosis of renal tract abnormalities is now firmly established. Postnatal imaging protocols are constantly evolving and still many questions remain unanswered. Most infants are asymptomatic at birth and aggressive imaging is unwarranted both for the infant and overburdened Radiology departments. The urgency with which to undertake imaging relates to the suspected antenatal diagnosis and clinical scenario, with bilateral hydronephrosis, posterior urethral valves and complicated duplex systems taking a high priority. The main imaging modality postnatally remains ultrasound, and together with nuclear medicine gives a powerful combination of both anatomy and function. Intravenous urography is never indicated in the neonate. Copyright © 2001 John Wiley & Sons, Ltd.     

基于ABAQUS的复合材料低速冲击损伤分析

目的分析不同冲击能量对复合材料层合板的损伤情况,验证有限元模型的合理性和有效性。方法以CCF300/10128H型碳纤维树脂基复合材料层合板为研究对象,采用落锤冲击试验机对层合板进行冲击实验,然后对冲击后的试验件进行超声C扫描。建立有限元模型,运用ABAQUS软件对冲击过程进行模拟。结果有限元模拟结果与实验结果吻合良好。结论复合材料层合板内部损伤随着冲击能量的增大而快速变大。出现穿透损伤以后,损伤趋于平缓,有限元模型能够较好地预测复合材料低速冲击损伤。     

Calorimetric studies on the thermal stability of methyl ethyl ketone peroxide (MEKP) formulations

The energetic decomposition of methyl ethyl ketone peroxide (MEKP) and its formulations have long been known to present a significant risk. Indeed, MEKP has the highest number of reported decomposition incidents of all organic peroxides, many of which have led to significant numbers of fatalities, injuries and damage. It is noteworthy that incidents have been reported at all stages of the product lifecycle.This paper is derived from incident-investigation work and provides a summary of serious incidents involving MEKP, followed by details of calorimetric experiments performed to investigate thermal stability of representative MEKP formulations containing varying amounts of MEKP monomer. In particular we report the wide degree of variation that exists between commercial MEKP formulations, even between materials that are of the same nominal formulation. Such variations are detectable using differential scanning calorimetry (DSC).Follow-up studies performed on a representative MEKP formulation containing MEKP monomer indicate that a risk of decomposition exists at temperatures well below the reported self-accelerating decomposition temperature (SADT) of the products. As such, the experimental results reported here suggest that lower storage temperatures (commonly recommended by manufacturers to maximise shelf life) should be considered as being essential throughout the product lifecycle to reduce the risk of accidents in storage and transportation.     

Acute Upper Thermal Limits of Three Aquatic Invasive Invertebrates: Hot Water Treatment to Prevent Upstream Transport of Invasive Species

Transport of aquatic invasive species (AIS) by boats traveling up rivers and streams is an important mechanism of secondary spread of AIS into watersheds. Because physical barriers to AIS movement also prevent navigation, alternate methods for preventing spread are necessary while allowing upstream navigation. One promising approach is to lift boats over physical barriers and then use hot water immersion to kill AIS attached to the hull, motor, or fishing gear. However, few data have been published on the acute upper thermal tolerance limits of potential invaders treated in this manner. To test the potential effectiveness of this approach for a planned boat lift on the Fox River of northeastern WI, USA, acute upper thermal limits were determined for three AIS, adult zebra mussels (Dreissena polymorpha), quagga mussels (Dreissena rostriformis bugensis), and spiny water fleas (Bythotrephes longimanus) from the local area employing temperatures from 32 to 54°C and immersion times from 1 to 20 min. Mortality was determined after immersion followed by a 20-min recovery period. Immersion at 43°C for at least 5 min was required to ensure 100% mortality for all three species, but due to variability in the response by Bythotrephes a 10 min immersion would be more reliable. Overall there were no significant differences between the three species in acute upper thermal limits. Heated water can be an efficient, environmentally sound, and cost effective method of controlling AIS potentially transferred by boats, and our results should have both specific and wide-ranging applications in the prevention of the spread of aquatic invasive species.     

Construction and demolition waste generation and management in Lisbon (Portugal)

The management of construction and demolition waste (CDW) is essential in the formation, growth and renovation of urban areas. This paper presents part of a study on CDW generation and management in the Lisbon Metropolitan Area (LMA). CDW generation was estimated for 2006 and 2007 based on construction activity and waste load movements. The results revealed that in the municipality of Lisbon, remodeling construction activity prevailed, with CDW generation indicators of 954 t/day and a per capita rate of 0.60 t/year. Both values are above the average for the LMA and its two sub-regions (Greater Lisbon and the Setúbal Peninsula). The installed infrastructure for CDW management identified in the LMA is situated within a maximum distance of about 23 km from the geometric center of the city of Lisbon. Despite the fact these locations favor the municipality of Lisbon, the occurrence of illegal dumps is still a reality. A notable effort towards environmental education addressing CDW management is under way so as to make involved citizens aware of the recent CDW legislation, Decree-Law Nr. 46/2008, as well as of the problems arising from scenarios of environmental degradation and uncontrolled use of natural resources in the civil construction sector. Policies are outlined aiming to move towards the more judicious management of CDW.