Cleaner production in the management of water use at a poultry slaughterhouse of Vale do Taquari,Brazil: a case study

This study included the layout characterization for the production process of a poultry slaughterhouse using qualitative and quantitative flow charts for water management; analysis of general parameters for pollution load in the wastewater produced in critical stages of the production process and assessment of environmental impact indicators. Prognoses for cleaner production based on water management were established. The diagnostic stage revealed that the scalding, pre-chilling, separated points of wastewater disposal for the wastewater treatment plant and disposal of treated and non-reused wastewater were critical for water management. Dissolved oxygen depletion and eutrophication account for the major environmental impacts of these wastewaters, resulting in an environmental pressure index of 32.1. The opportunities for cleaner production implementation resulting from this study include the reuse of wastewaters from pre-chilling and chilling for pre-washing of carcasses, since average temperatures of these wastewaters range between 4 and 16 °C. This will contribute to lowering the oil and grease pollution load. Another strategy concerns the standardization of cleaning procedures with rational water use in all work shifts and implementation of water meters on a sector-by-sector basis. In the latter case, which has already been implemented, water consumption was reduced by 13%.     

Study of the solubility and stability of polystyrene wastes in a dissolution recycling process

Dissolution with suitable solvents is one of the cheapest and more efficient processes for polystyrene waste management. In this work the solubility of polystyrene foams in several solvents benzene, toluene, xylene, tetrahydrofuran, chloroform, 1,3-butanediol, 2-butanol, linalool, geraniol, d-limonene, p-cymene, terpinene, phellandrene, terpineol, menthol, eucalyptol, cinnamaldheyde, nitrobenzene, N,N-dimethylformamide and water has been determined.Experimental results have shown that to develop a “green process” the constituents of essential oils, d-limonene, p-cymene, terpinene, phellandrene, are the most appropriate solvents. The action of these solvent does not produce any degradation of polymer chains. The solubility of the polymer in the mentioned solvents at different temperatures has been investigated. The solvent can be easily recycled by distillation.     

Assessment of Water Quality in a Border Region Between the Atlantic Forest and an Urbanised Area in Rio de Janeiro,Brazil

The preservation of water resources is one of the goals of the designation of parks that act as natural reservoirs. In order to assess the impact of the presence of humans in an environmental preservation area bordering urban areas, the presence of four pathogenic enteric viruses [group A rotavirus (RV-A), norovirus (NoV), human adenoviruses (HAdV), and hepatitis A virus (HAV)], as well as the physico-chemical parameters, and Escherichia coli levels were assessed in riverine water samples. From June 2008 to May 2009, monthly monitoring was performed along the Engenho Novo River. RV-A, NoV, and HAdV were observed in 29 % (31/108) of the water samples, with concentrations of up to 10³ genome copies/liter. The natural occurrence of infectious HAdV was demonstrated by Integrated Cell Culture-PCR (ICC-PCR). This study confirms the suitability of using the detection of fecal-oral transmitted viruses as a marker of human fecal contamination in water matrices and indicates the spread of pathogenic viruses occurring in an alleged area of environmental protection.     

Evaluation of the geotechnical properties of MSW in two Brazilian landfills

The characteristics of municipal solid waste (MSW) play a key role in many aspects of waste disposal facilities and landfills. Because most of a landfill is made up of MSW, the overall stability of the landfill slopes are governed by the strength parameters and physical properties of the MSW. These parameters are also important in interactions involving the waste body and the landfill structures: cover liner, leachate and gas collection systems. On the other hand, the composition of the waste, which affects the geotechnical behavior of the MSW, is dependent on a variety of factors such as climate, disposal technology, the culture and habits of the local community. It is therefore essential that the design and stability evaluations of landfills in each region be performed based on the local conditions and the geotechnical characteristic of the MSW. The Bandeirantes Landfill, BL, in São Paulo and the Metropolitan Center Landfill, MCL, in Salvador, are among the biggest landfills in Brazil. These two disposal facilities have been used for the development of research involving waste mechanics in recent years. Considerable work has been made in the laboratory and in the field to evaluate parameters such as water and organic contents, composition, permeability, and shear strength. This paper shows and analyzes the results of tests performed on these two landfills. The authors believe that these results could be a good reference for certain aspects and geotechnical properties of MSW materials in countries with similar conditions.     

Indicators for sustainable energy development: Brazil's case study

This article summarizes the results of the project on indicators for sustainable energy development (ISED) in Brazil. The project's aim was to present energy related economic, social and environmental data to policy makers in a coherent and consistent form, showing interlinkages, time‐series and cross‐sectoral analyses and assess energy policy. Two priority areas assessed by these indicators, regarding the country's energy supply and demand, helped in the identification of a number of energy policy options that focused on specific aspects of the country's energy sector. On the supply side, these options include the development and stimulation of renewable energy, such as small‐scale hydroelectric, wind, solar photovoltaic power and bagasse cogeneration; stimulation of programmes for ethanol use as automotive fuel and sugarcane bagasse cogeneration; and implementation of natural gas‐fired, combined heat and power (CHP) plants. On the demand side, policy options include: the full implementation of the law on efficiency standards for appliances; expansion of utility investment in end‐use energy efficiency; adoption of targets and protocols to reduce energy intensity in the industrial sector; improvement of passenger transport efficiency; and the creation of a fund to improve energy affordability for the poor.