Weed seedbank evaluating method to generate spatial distribution maps

The objective of this work was to develop a fast and practical method of weed seedbank evaluation to generate spatially distributed maps for use in site-specific weed management. Soil cores were collected at 0.20 m depth, air-dried, and then submitted to seedling growth in greenhouse. The sampling grid of 20 by 20 m was georeferenced by Global Positioning System, obtaining 73 soil cores with three replicates. During the greenhouse trial, there were two peaks of weed seedling growth: one in 119 days after water irrigation and another after KNO3 application. Weeds seedbank maps were obtained at different stages of seedling growth. The Pearson correlation was 0.99 for Brachiaria plantaginea seedbank map, 0.95 for Commelina benghalensis, and 0.85 for Cyperus rotudus generated at 119 days compared with 392 days after seedling growth in the greenhouse. The Brachiaria plantaginea seedbank map evaluated at 35 days presented correlation of 0.97 with 392 days. It was concluded that, for site-specific weed seedbank management, the evaluation of seedling growth in greenhouse until the first emergence peak is enough to generate weed seedbank maps.     

Effect of sulphadimethoxine contamination on barley (Hordeum distichum L., Poaceae, Liliposida)

Animal wastes from intensive farming are generally collected for field fertilisation. They may contain drugs that can become soil pollutants. To evaluate the possible effects of such contamination in terrestrial systems, sulphadimethoxine has been subjected to laboratory tests (in vitro, synthetic medium, and soil) using seeds of barley (Hordeum distichum L.). The drug suppressed normal post-germinative development and growth of roots and leaves in both test conditions; this effect was dependent on the bioaccumulation rate, which was higher on synthetic medium than in soil. Bioaccumulation was higher in roots than foliage and this was markedly evident in soil and, in particular, in soils with a low humus content. The environmental risk of sludge application on soils and the possible contamination of food chains are discussed.     

Prenatal karyotyping in malformed fetuses

Experience with prenatal karyotyping of 237 fetuses with sonographic evidence of malformation is reported. Abnormal karyotype was found in 40 cases (16-8 per cent): chromosomal aberrations were found in 19 of the 178 fetuses with an isolated structural anomaly (10-6 per cent) and in 21 of the 59 fetuses with multiple malformations (35-6 per cent). Detailed cytogenetic and morphological information concerning fetuses affected by omphalocele, duodenal atresia, hydrocephalus, multicystic kidney, unilateral hydronephrosis and cystic hygroma is reported. The need for a very careful ultrasound evaluation of fetal anatomy in these pregnancies is stressed, as the risk of a chromosomal anomaly depends mainly on the existence of more than one ultrasonically diagnosed structural defect.     

Generation of PCDD/F in Fly Ash from Municipal Solid Waste Incinerators

Abstract

Fly ash from municipal solid waste incinerators (MSWIs) has been characterized in terms of polychlorinated dibenzyl-p-dioxin and polychlorinated dibenzofuran (PCDD/F) content. Increasing values of PCDD/Fs have been found to correlate with decreasing temperatures of sampling points in flue gas treatment lines of the plants, confirming other researchers’ findings about temperature as the major controlling parameter for the PCDD/F formation. Measured PCDD/F ratios show that de novo synthesis is the dominant formation mechanism. The increasing trends of particulate-bound PCDD/Fs can be explained not only through the dominant de novo synthesis process but also considering the adsorption of gaseous PCDD/Fs on fly ash deposits, even outside the typical de novo synthesis temperature ranges. The effective role of a post-combustor unit, imposed by Italian law to destroy PCDD/Fs, also needs to be carefully reconsidered.     

Festuca arundinacea,glutathione S-transferase and herbicide safeners: A preliminary case study to reduce herbicidal pollution

The expression of glutathione S-transferase (GST) activity in Festuca arundinacea was investigated in response to the following herbicide safeners: benoxacor, cloquintocet-mexyl, fenchlorazol-ethyl, fenclorim, fluxofenim and oxabetrinil. All the above compounds enhanced the GST activity tested towards the “model” substrate 1-chloro-2,4-dinitrobenzene (CDNB). Assays of GST activity towards the herbicides terbuthylazine (N ²-tert-butyl-6-chloro-N ⁴-ethyl-1,3,5-triazine-2,4-diamine) and butachlor (N-butoxymethyl-2-chloro-2′,6′-diethylacetanilide) as substrates also showed the ability of the safeners to enhance the enzyme activity towards both these herbicides, with the exception of cloquintocet-mexyl for the enzyme activity towards butachlor. As a consequence of the above effects at a macro-scale level, decreased herbicide accumulation and persistence were ascertained in response to the addition of the safener benoxacor to both terbuthylazine and butachlor treatments. These results are discussed in terms of capacity of benoxacor to induce herbicide detoxification in Festuca arundinacea with a view to utilizing them in reducing herbicide pollution.     

Feasibility study of preparation and certification of reference materials for nitrogen dioxide and sulfur dioxide in diffusive samplers

This paper presents the results of a feasability study for the preparation and certification of reference materials (RMs) for nitrogen dioxide (NO(2)) and sulfur dioxide (SO(2)) in diffusive samplers. RMs for NO(2) were prepared by exposure to gas mixtures in a chamber while the RMs for SO(2) were prepared by liquid spiking. Certification of RMs for NO(2) was found feasible with a certified uncertainty of 5.8% and a proposed shelf life of 5 years. The uncertainty was calculated with contribution from the homogeneity of preparation, stability and transport of the CRMs and from an external verification of the certified value. To reach 5.8% of uncertainty, the contribution of the differences between the results of analysis by ion chromatography and colorimetry must be eliminated. It is proposed to solve this by pre-extracting the samplers with water before analysis. The results of this study indicate that the samplers are stable for at least two years before and after exposure when stored in a refrigerator. By contrast, the certification of RMs for SO(2) was found to not be feasible due to instability problems. This instability was attributed to reaction of sulfate on the walls of the samplers. Alternatively, the preparation of RMs by simultaneous exposure to SO(2) and NO(2) has been tested. Satisfying homogeneities has been reached both for NO(2) and SO(2).     

Review of Italian experience on automotive shredder residue characterization and management

Automotive Shredder Residue (ASR) is a special waste that can be classified as either hazardous or non hazardous depending on the amount of hazardous substances and on the features of leachate gathered from EN12457/2 test. However both the strict regulation concerning landfills and the EU targets related to End-of-Life Vehicles (ELVs) recovery and recycling rate to achieve by 2015 (Directive 2000/53/EC), will limit current landfilling practice and will impose an increased efficiency of ELVs valorization. The present paper considers ELVs context in Italy, taking into account ASRs physical–chemical features and current processing practice, focusing on the enhancement of secondary materials recovery. The application in waste-to-energy plants, cement kilns or metallurgical processes is also analyzed, with a particular attention to the possible connected environmental impacts. Pyrolysis and gasification are considered as emerging technologies although the only use of ASR is debatable; its mixing with other waste streams is gradually being applied in commercial processes. The environmental impacts of the processes are acceptable, but more supporting data are needed and the advantage over (co-)incineration remains to be proven.     

Mechanical and toxicological evaluation of concrete artifacts containing waste foundry sand

The creation of metal parts via casting uses molds that are generally made from sand and phenolic resin. The waste generated after the casting process is called waste foundry sand (WFS). Depending on the mold composition and the casting process, WFS can contain substances that prevent its direct emission to the environment. In Brazil, this waste is classified according to the Standard ABNT NBR 10004:2004 as a waste Class II (Non-Inert). The recycling of this waste is limited because its characteristics change significantly after use. Although the use (or reuse) of this byproduct in civil construction is a technically feasible alternative, its effects must be evaluated, especially from mechanical and environmental points of view. Thus, the objective of this study is to investigate the effect of the use of WFS in the manufacture of cement artifacts, such as masonry blocks for walls, structural masonry blocks, and paving blocks. Blocks containing different concentrations of WFS (up to 75% by weight) were produced and evaluated using compressive strength tests (35 MPa at 28 days) and toxicity tests on Daphnia magna, Allium cepa (onion root), and Eisenia foetida (earthworm). The results showed that there was not a considerable reduction in the compressive strength, with values of 35 ± 2 MPa at 28 days. The toxicity study with the material obtained from leaching did not significantly interfere with the development of D. magna and E. foetida, but the growth of the A. cepa species was reduced. The study showed that the use of this waste in the production of concrete blocks is feasible from both mechanical and environmental points of view.