Optimization of animal manure vermicomposting based on biomass production of earthworms and higher plants

The goal of this study was to optimize the mixture of swine manure (SM) and cattle manure (CM) used in the vermicomposting process, seeking to increase the manure biodegradation rate and enhance the biomass production of both earthworms and higher plants. To achieve this goal, physico-chemical parameters were determined to assess the final compost quality after 50 days of vermicomposting. The different manure ratios used to produce the composts (C) were as follows (SM:CM, % m/m basis): C1 100:0, C2 (75:25), C3 (50:50), C4 (25:75), and C5 (0:100). In addition, the earthworm biomass and the phytoproductivity of lettuce (Lactuca sativa L.) plants grown in mixtures (1:1) of natural soil and the most viable vermicomposts were investigated. The C1 and C2 compost compositions were associated with high earthworm mortality rates. The C3 compost provided the highest mineral concentrations and C5 showed the highest lettuce yield (wet biomass). The results verify that stabilized cattle manure is an excellent substrate for the vermicomposting process and that fresh swine manure must be mixed with pre-stabilized cattle manure to ensure an optimized vermicomposting process, which must be controlled in terms of temperature and ammonia levels. It is concluded that small livestock farmers could add value to swine manure by applying the vermicomposting process, without the need for high investments and with a minimal requirement for management of the biodegradation process. These are important technical aspects to be considered when circular economy principles are applied to small farms.     

Completely Green Synthesis of Antimicrobial Nanocomposites Based on Hydrogels Containing Silver Nanoparticles for 3D Biofabrication of Smart Scaffolds

Journal of Polymers and the Environment - Lack of biomaterials feasible for three-dimensional (3D) biofabrication and the limited capability to sterilize some of these items are current gaps that...     

Analysis of the environmental impact on a stream: is only tannery to blame?

The contribution of wastewater from a tannery industry to the pollution of a stream was investigated. The main parameters studied were biochemical oxygen demand, chemical oxygen demand, chromium, dissolved oxygen, fecal and total coliforms, nitrogen, oils and greases, pH, phosphorous, sulfides, suspended solids, turbidity, and volatile solids. Three sampling points were located: (1) at the discharge point of tannery wastewater, (2) 50 m upstream, and (3) 80 m downstream of discharge point. Also was investigated the pollution at the stream source.     

On the ASR and ASR thermal residues characterization of full scale treatment plant

In order to obtain 85% recycling, several procedures on Automotive Shredder Residue (ASR) could be implemented, such as advanced metal and polymer recovery, mechanical recycling, pyrolysis, the direct use of ASR in the cement industry, and/or the direct use of ASR as a secondary raw material. However, many of these recovery options appear to be limited, due to the possible low acceptability of ASR based products on the market. The recovery of bottom ash and slag after an ASR thermal treatment is an option that is not usually considered in most countries (e.g. Italy) due to the excessive amount of contaminants, especially metals. The purpose of this paper is to provide information on the characteristics of ASR and its full-scale incineration residues. Experiments have been carried out, in two different experimental campaigns, in a full-scale tyre incineration plant specifically modified to treat ASR waste.Detailed analysis of ASR samples and combustion residues were carried out and compared with literature data. On the basis of the analytical results, the slag and bottom ash from the combustion process have been classified as non-hazardous wastes, according to the EU waste acceptance criteria (WAC), and therefore after further tests could be used in future in the construction industry. It has also been concluded that ASR bottom ash (EWC – European Waste Catalogue – code 19 01 12) could be landfilled in SNRHW (stabilized non-reactive hazardous waste) cells or used as raw material for road construction, with or without further treatment for the removal of heavy metals. In the case of fly ash from boiler or Air Pollution Control (APC) residues, it has been found that the Cd, Pb and Zn concentrations exceeded regulatory leaching test limits therefore their removal, or a stabilization process, would be essential prior to landfilling the use of these residues as construction material.     

Full scale treatment of ASR wastes in a modified rotary kiln

A plant, designed for the thermo-valorisation of tyres, was specifically modified in order to treat Automobile Shredder Residue (ASR). Results from two full-scale combustion experiments, carried out on large ASR feeding lots (thousands of tons) indicate the proposed technology as a potential route to help the fulfilling of impending 95% reuse and recovery target set by the End of life Vehicle (ELV) Directive (January 2015). The paper describes the main operational troubleshot occurred during the first experiment (emissions at the stack out of regulatory limits and problems of clogging on the conveyer belt) and the consequent upgrading solutions (pre-treatment, introduction of waste double low-flow screw feeder and a cyclone prior to the main fan, modification of rotatory kiln inlet) adopted to allow, during the second long-term experiment, a continuous basis operation of the plant in full compliance with the discharge limit to the atmosphere. Characterization of both ASR and combustion residues allowed to quantify a 18% of combustion residues as not dangerous waste while only the 2% as hazardous one. A pre-treatment for the reduction of fines in the ASR was recommended in order to achieve the required energy recovery efficiency.     

AN Amazon Perspective on the Forest-Climate Connection: Opportunity for Climate Mitigation, Conservation and Development?

Amazonia contains more carbon (C) than a decade of global, human-induced CO₂ emissions (60–80 billion tons). This C is gradually being released to the atmosphere through deforestation. Projected increases in Amazon deforestation associated with investments in road paving and other types of infra-structure may increase these C emissions. An increase of 25–40% in Amazon deforestation due to projected road paving could counterbalance nearly half of the reductions in C emissions that would be achieved if the Kyoto Protocol were implemented. Forecasted emission increases could be curtailed if development strategies aimed at controlling frontier expansion and creating economic alternatives were implemented. Given ancillary benefits and relative low costs, reducing deforestation in Amazonia and other tropical areas could be an attractive option for climate mitigation. Projects that help contain deforestation and reduce frontier expansion can play an important role in climate change mitigation but currently are not allowed as an abatement strategy under the climate regime. Creating incentives for forest conservation and decreased deforestation can be a unique opportunity for both forest conservation and climate mitigation.     

Longitudinal monitoring of neutral and adaptive genomic diversity in a reintroduction

Restoration programs in the form of ex-situ breeding combined with reintroductions are becoming critical to counteract demographic declines and species losses. Such programs are increasingly using genetic management to improve conservation outcomes. However, the lack of long-term monitoring of genetic indicators following reintroduction prevents assessments of the trajectory and persistence of reintroduced populations. We carried out an extensive monitoring program in the wild for a threatened small-bodied fish (southern pygmy perch, Nannoperca australis) to assess the long-term genomic effects of its captive breeding and reintroduction. The species was rescued prior to its extirpation from the terminal lakes of Australia's Murray-Darling Basin, and then used for genetically informed captive breeding and reintroductions. Subsequent annual or biannual monitoring of abundance, fitness, and occupancy over a period of 11 years, combined with postreintroduction genetic sampling, revealed survival and recruitment of reintroduced fish. Genomic analyses based on data from the original wild rescued, captive born, and reintroduced cohorts revealed low inbreeding and strong maintenance of neutral and candidate adaptive genomic diversity across multiple generations. An increasing trend in the effective population size of the reintroduced population was consistent with field monitoring data in demonstrating successful re-establishment of the species. This provides a rare empirical example that the adaptive potential of a locally extinct population can be maintained during genetically informed ex-situ conservation breeding and reintroduction into the wild. Strategies to improve biodiversity restoration via ex-situ conservation should include genetic-based captive breeding and longitudinal monitoring of standing genomic variation in reintroduced populations.     

Strong site fidelity and longer internesting interval for solitary nesting olive ridley sea turtles in Brazil

Olive ridley sea turtles display two different types of nesting behavior: in arribada (synchronous mass nesting) or solitarily. Contrarily to arribadas, little has been published about solitary nesters. This study aimed to expand the knowledge on internesting interval and site fidelity of solitary nesting olive ridleys and to test a possible development of arribada nesting behavior. Data were collected in Sergipe (Brazil) over 125 km of beach from 10°30′S/36o23′W to 11°26′S/37o19′W, between nesting seasons 2004/2005 and 2006/2007. From 962 tagged females, 173 were seen renesting. The average internesting interval found was longer (22.35 ± 7.01 days) than previously described, which might relate to lower water temperatures during the internesting period. Olive ridleys at Sergipe showed high nesting site fidelity, with consecutive nesting events occurring in close proximity, non-randomly and dependently of previous events. Most of the consecutive nests were separated by 4.06–5.59 km. Development of arribada nesting behavior was not confirmed.     

Atmospheric measurements of the halogenated hydrocarbons involved in global change phenomena

Chlorofluorocarbons and their replacement compounds are anthropogenic compounds of great environmental concern. For this reason monitoring their atmospheric mixing ratios on a worldwide scale is recommended. An analytical methodology for the simultaneous determination of selected chlorofluorocarbons and their replacement compounds has recently been developed. This methodology was applied in the analysis of actual air samples collected in remote and semi-remote areas located in the Northern and Southern Hemispheres. The concentration levels measured in the air samples collected in the two hemispheres are reported.     

Soluble and insoluble fractions of heavy metals in wet and dry atmospheric depositions in Bologna,Italy

Atmospheric depositions were collected monthly using a modified wet and dry sampler (dry deposition was collected on a water surface) located in Bologna, a northern Italian urban area, to evaluate the impact of airborne heavy metals on the local pollution load. Wet deposition samples were filtered and heavy metal contents in soluble and insoluble fractions were determined. The same procedure was applied to the water samples which collected dry deposition. The entire procedure was tested using a certified reference material (CRM), which provided satisfying recovery results. The percentage of heavy metal soluble fraction in dry deposition was generally lower than in wet one; Cd, V, Cu and Zn showed a higher average solubility than Cr, Ni and Pb both in wet and dry deposition. Factor analysis, after a varimax rotation of principal components, suggested possible anthropogenic sources which explain different metal deposition patterns. This data analysis also allowed to distinguish different clusters formed by monthly fluxes of heavy metals.