TG, FT-IR and NMR characterization of n-C16H34 contaminated alumina and silica after mechanochemical treatment

This paper deals with the application of mechanochemistry to model systems composed of alumina or silica artificially contaminated with n-C16H34. The mechanochemical treatment was carried out by means of a ring mill for times ranging from 10 to 40h. Thermogravimetry and infrared and nuclear magnetic resonance spectroscopies were used for the characterization of the mechanochemical products. The results have indicated that, in the case of alumina, almost all the contaminant n-C16H34 undergoes a complex oxidative reaction path whose end products are strongly held on the surface. These end products are most likely made of crosslinked, partially oxidized hydrocarbon chains bond to the solid surface via COO(-) groups. In the case of silica, the hydrocarbon undergoes a different, equally complex reaction path, but to a lower extent. In this case the end products are most probably carbonylic compounds and graphitic carbon. Then, for both solid matrices, the mechanochemical treatment promotes significant modification of the chemical nature of the polluting hydrocarbon with end products much more difficult to remove from the surface. As the systems studied are models of sites contaminated by aliphatic hydrocarbon, the results are worthy of consideration in relation to the mobility of the contaminants in the environment.     

Gas-particle concentration and distribution of n-alkanes and polycyclic aromatic hydrocarbons in the atmosphere of Prato (Italy)

Air samples were collected in an urban and industrialised area of Prato (Italy) during 2002, as part of a study to identify and measure aliphatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs). Total concentrations of aliphatic hydrocarbons ranged between 170 and 282ngm(-3) in the gas phase and from 48.9 to 276ngm(-3) in the particulate phase. The average total PAH concentrations (gas+particulate) were 59.4+/-26.5ngm(-3), and both gas and particulate phase PAH concentrations decreased with increasing temperature. Source identification using diagnostic ratios and principal component analysis identified automobile traffic, in particular, the strong influence of diesel fuel burning, as the major PAH source. Gas-particle partition coefficients (K(p)'s) of n-alkane and PAHs were well correlated with the sub-cooled liquid vapour pressure (P(L)(0)) and indicate stronger sorption of PAHs to aerosol particles compared with n-alkanes.     

New evidences in the complexity of contamination of the lagoon of Venice: polybrominated diphenyl ethers (PBDEs) pollution

This study presents the first evaluation of the current pollution by polybrominated diphenyl ethers (PBDEs) of surface sediments from the Lagoon of Venice. We focused the research on tri-to hepta-BDEs, the main components of penta- and octa-mixtures, which are considered to be the most toxic for the biocoenosis. The results pointed out a quite homogeneous contamination of this keystone European transitional environment, with ∑ ₁₃PBDEs values ra nging from 0.39 to 6.78 ng/g dry weight; these values reflect low to moderate pollution levels, which is in conformity to other coastal European ecosystems. The average PBDE profile of the lagoon sediments follows this decreasing trend of congeners: BDE-47>BDE-99> >BDE-190>BDE-28>BDE-153>BDE-154>BDE-138, BDE-183, and BDE-17, which is similar to the worldwide distribution pattern. BDE-47 and BDE-99 revealed a recent use of a penta-BDE mixture, while the presence of hepta-BDEs (BDE-183 and BDE-190) in all of the sites can indicate the actual use of a deca-BDE formulation, because these congeners are considered to be debrominated byproducts of BDE-209 degradation.     

Chitosan for direct bioflocculation of wastewater

Environmental Chemistry Letters - Coagulation/flocculation is a major phenomenon occurring during industrial and municipal water treatment to remove suspended particles. Common coagulants are metal...     

Slope and pig slurry rate may increase the transfer of chemical elements by surface water runoff

There is a need to evaluate the interference of pig slurry rate and the terrain slope in the chemical elements losses from the soil. This work aimed to quantify water and chemical element losses by surface runoff due to terrain slope and pig slurry rate (PS) in two soils with contrasting textures. Two trials were evaluated in 2018 and 2019 in Cambisol and Nitisol. Rates of 0, 22.5, 45, and 90 m³ ha⁻¹ yr⁻¹ of PS were applied superficially in sites with slopes ranging from 10% to 35%. Perennial forage grass Tifton 85 (Cynodon dactylon) was grown as summer crop and ryegrass (Lolium multiflorum) was sown in the cold seasons in a field environment. Were determined the runoff, the volume of water, and chemical elements (Al, Ca, P, Mg, Cd, Cr, Cu, Mn, Fe, Pb, and Zn) lost by the surface runoff after natural rainfall. Increasing land slope elevated water losses substantially, on average 23.4 times in Cambisol and 10.8 times in Nitisol. This increase resulted in average increases of 27.6 and 12.4 times in the losses of the chemical elements analyzed for Cambisol and Nitisol, respectively. There was a reduction in water losses by surface runoff due to increased PS rates applied in both sites. The increased PS rate affected the losses of Cr and Cu in Cambisol and P, Mg, Cd, and Cu in Nitisol. The clayey soil potentiated the water and chemical elements losses by surface runoff in relation to the soil with lower clay content. Regardless of the soil, water and chemical element losses are maximized at higher slopes.     

Dissipation of 2,4-D in soils of the Humid Pampa region, Argentina: a microcosm study

Phenoxy herbicides like 2,4-dichlorophenoxyacetic acid (2,4-D) are widely used in agricultural practices. Although its half life in soil is 7-14d, the herbicide itself and its first metabolite 2,4-dichlorophenol (2,4-DCP) could remain in the soil for longer periods, as a consequence of its intensive use. Microcosms assays were conducted to study the influence of indigenous microflora and plants (alfalfa) on the dissipation of 2,4-D from soils of the Humid Pampa region, Argentina, with previous history of phenoxy herbicides application. Results showed that 2,4-D was rapidly degraded, and the permanence of 2,4-DCP in soil depended on the presence of plants and soil microorganisms. Regarding soil microbial community, the presence of 2,4-D degrading bacteria was detected even in basal conditions in this soil, possibly due to the adaptation of the microflora to the herbicide. There was an increment of two orders of magnitude in herbicide degraders after 15d from 2,4-D addition, both in planted and unplanted microcosms. Total heterotrophic bacteria numbers were about 1x10(8) CFUg(-1) dry soil and no significant differences were found between different treatments. Overall, the information provided by this work indicates that the soil under study has an important intrinsic degradation capacity, given by a microbial community adapted to the presence of phenoxy herbicides.     

On the ASR and ASR thermal residues characterization of full scale treatment plant

In order to obtain 85% recycling, several procedures on Automotive Shredder Residue (ASR) could be implemented, such as advanced metal and polymer recovery, mechanical recycling, pyrolysis, the direct use of ASR in the cement industry, and/or the direct use of ASR as a secondary raw material. However, many of these recovery options appear to be limited, due to the possible low acceptability of ASR based products on the market. The recovery of bottom ash and slag after an ASR thermal treatment is an option that is not usually considered in most countries (e.g. Italy) due to the excessive amount of contaminants, especially metals. The purpose of this paper is to provide information on the characteristics of ASR and its full-scale incineration residues. Experiments have been carried out, in two different experimental campaigns, in a full-scale tyre incineration plant specifically modified to treat ASR waste.Detailed analysis of ASR samples and combustion residues were carried out and compared with literature data. On the basis of the analytical results, the slag and bottom ash from the combustion process have been classified as non-hazardous wastes, according to the EU waste acceptance criteria (WAC), and therefore after further tests could be used in future in the construction industry. It has also been concluded that ASR bottom ash (EWC – European Waste Catalogue – code 19 01 12) could be landfilled in SNRHW (stabilized non-reactive hazardous waste) cells or used as raw material for road construction, with or without further treatment for the removal of heavy metals. In the case of fly ash from boiler or Air Pollution Control (APC) residues, it has been found that the Cd, Pb and Zn concentrations exceeded regulatory leaching test limits therefore their removal, or a stabilization process, would be essential prior to landfilling the use of these residues as construction material.     

Prenatal diagnosis and obstetrical management of multicystic dysplastic kidney disease

Multicystic dysplastic kidney disease (MDKD) is one of the most common congenital renal anomalies. We report 16 consecutive cases of MDKD recognized in the antenatal period by sonography. Diagnosis is usually easy as MDKD has in the vast majority of cases a striking ultrasound appearance including enlargement of the kidney and multiple renal cysts. However, differentiation from obstructive uropathy may be difficult, and we made a total of five erroneous diagnoses. Unilateral MDKD has almost invariably a good prognosis. However, severe life-threatening associated anomalies were found in six cases. Therefore, a detailed survey of fetal anatomy and determination of karyotype are strongly recommended.     

Production and biomass accumulation of periphytic diatoms growing on glass slides during a 1-year cycle in a subtropical estuarine environment (Bay of Paranaguá, southern Brazil)

Production rates, chlorophyll concentrations and general composition of periphytic diatom communities growing on glass slides were studied in relation to environmental parameters during one seasonal cycle in the Bay of Paranaguá, southern Brazil. Slides were routinely submersed at 1, 2 and 3 m depth and recovered weekly for microscopic examinations, analyses of chlorophyll, cell counts and in situ photosynthetic incubations using the Winkler titration method. Water samples were also collected at surface and bottom layers for determinations of temperature, salinity, nutrients and chlorophyll in the water. The periphytic community was mainly formed by epipelic and epipsammic species, dominated by Navicula phyllepta, Cylindrotheca closterium, Navicula spp. and Amphora sp. Weekly chlorophyll a and cell accumulations on slides varied from <1–32 mg m⁻² and up to 31 × 10⁸cells m⁻², respectively. Photosynthetic rates varied from <1 to 35 mg oxygen mg chlorophyll a ⁻¹ h⁻¹, with higher values in summer. Daily production varied from 5 to 3,600 mg oxygen m⁻² day⁻¹ (<0.01–1.4 g carbon m⁻² day⁻¹). Multiple regression analysis revealed that vertical differences in light conditions and grazing pressure jointly affected the influence of temperature on the seasonal patterns of cell densities and chlorophyll concentrations according to depth. Received: 27 April 2000 / Accepted: 16 August 2000     

AN Amazon Perspective on the Forest-Climate Connection: Opportunity for Climate Mitigation, Conservation and Development?

Amazonia contains more carbon (C) than a decade of global, human-induced CO₂ emissions (60–80 billion tons). This C is gradually being released to the atmosphere through deforestation. Projected increases in Amazon deforestation associated with investments in road paving and other types of infra-structure may increase these C emissions. An increase of 25–40% in Amazon deforestation due to projected road paving could counterbalance nearly half of the reductions in C emissions that would be achieved if the Kyoto Protocol were implemented. Forecasted emission increases could be curtailed if development strategies aimed at controlling frontier expansion and creating economic alternatives were implemented. Given ancillary benefits and relative low costs, reducing deforestation in Amazonia and other tropical areas could be an attractive option for climate mitigation. Projects that help contain deforestation and reduce frontier expansion can play an important role in climate change mitigation but currently are not allowed as an abatement strategy under the climate regime. Creating incentives for forest conservation and decreased deforestation can be a unique opportunity for both forest conservation and climate mitigation.