Directive 2000/53/EC sets a goal of 85% material recycling from end-of-life vehicles (ELVs) by the end of 2015. The current ELV recycling rate is around 80%, while the remaining waste is called automotive shredder residue (ASR), or car fluff. In Europe, this is mainly landfilled because it is extremely heterogeneous and often polluted with car fluids. Despite technical difficulties, in the coming years it will be necessary to recover materials from car fluff in order to meet the ELV Directive requirement. This study deals with ASR pretreatment and pyrolysis, and aims to determine whether the ELV material recycling target may be achieved by car fluff mechanical separation followed by pyrolysis with a bench scale reactor. Results show that flotation followed by pyrolysis of the light, organic fraction may be a suitable ASR recycling technique if the oil can be further refined and used as a chemical. Moreover, metals are liberated during thermal cracking and can be easily separated from the pyrolysis char, amounting to roughly 5% in mass. Lastly, pyrolysis can be a good starting point from a "waste-to-chemicals" perspective, but further research should be done with a focus on oil and gas refining, in order both to make products suitable for the chemical industry and to render the whole recycling process economically feasible. 相似文献
Environmental Science and Pollution Research - The application of sewage sludge (SS) in the soil can be a valuable way to increase its content of organic matter. However, the concentration of... 相似文献
Environmental Science and Pollution Research - This study evaluated the reutilization of waste materials (scrap tires, sewage sludge, and wood chips) to remove volatile organic compounds (VOCs)... 相似文献
AbstractOrganochlorine (OCP) pesticides were determined in samples of sardine (Sardinella brasiliensis), whitemouth croaker (Micropogonias furnieri), and mullet (Mugil liza) from Guanabara Bay (state of Rio de Janeiro, Brazil). OCP concentrations and fish consumption were linked with acceptable daily intake values in order to assess the human health risk for the Brazilian population. The total concentrations of OCPs (Σ OCP) was 6.6?ng/g f.w., 7.5?ng/g f.w., and 2.8?ng/g f.w. for sardines, corvina, and mullet, respectively. There was a significant difference (P?<?0.05) among the species related to o,p’-DDD and o,p’-DDT concentrations. Both DDT-related compounds were 5 and 76 times more abundant in sardines than in whitemouth croaker and mullet. Newly discovered DDT metabolite, o-Cl-DDMU, was frequently detected in the fish. None of the samples exceeded the maximum limits for acceptable levels of OCP residues. According to the data of average intake of Brazilian population, none of three species exceeded toxicological parameter. The investigated fishes are considered as safe for human consumption in regard to exposure of the studied OCPs. However, fish may be a intake source of OCP metabolites such as o-Cl-DDMU whose toxicity is still unknown. 相似文献
Environmental Science and Pollution Research - This study aims to assess interrelationships between serum lead (Pb), cadmium (Cd), arsenic (As), and mercury (Hg) concentrations in pregnant women in... 相似文献
Ozone and a Fe2+/TiO2-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO2 content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO2. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R2adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56.
Jackfruit starch based biodegradable films containing lysozyme were characterized for their antimicrobial activity, thickness, solubility, water vapor permeability and mechanical properties. The biodegradable films had good appearance and antimicrobial activity against Micrococcus lysodeikticus. The thickness of the biodegradable films were not affected by the variation in pH, but the addition of lysozyme increased the thickness, the thickest films being those with the highest lysozyme concentrations. The variation in pH of the filmogenic solutions affected the solubility of the biodegradable films, water solubility being greatest at pH 7.0 and with the highest lysozyme concentration. The permeability of the biodegradable films was increased by incorporating lysozyme. The lysozyme concentration and pH variation caused changes in the mechanical properties. The addition of 8% lysozyme increased the tensile strength and Young’s modulus for all the pH values studied. With respect to the release of antimicrobial activity, the diffusion of lysozyme was shown to follow Fickian transport mechanism. 相似文献
Russian Journal of Ecology - Parkinsonia aculeata and Prosopis juliflora are two of the most problematic invasive plant species in the Brazilian tropical seasonal dry forest, but the mechanisms... 相似文献
This study investigates the effects of several blends of gasoline and anhydrous ethanol on exhaust emission concentrations of carbon monoxide (CO), total hydrocarbons (HCs), and nitrogen oxides (NOx) from a small spark-ignited non-road engine (SSINRE). Tests were carried out for different air/fuel equivalence ratios as measured by lambda (λ). A 196 cm3 single-cylinder four-stroke engine-generator operating at a constant load of 2.0 kW was used; pollutant gas concentrations were measured with an automatic analyzer similar to those typically used in vehicle inspections. The results showed that as the ethanol content of the mixture increased the concentrations of CO, HCs, and NOx reduced by 15, 53, and 34%, respectively, for values of λ < 1 (rich mixture) and by 52, 31, and 16% for values of λ > 1 (lean mixture). Overall, addition of anhydrous ethanol to the gasoline helped to reduce emissions of the pollutant gases investigated, what contributes to photochemical smog reduction and quality of life in urban areas. 相似文献
The feasibility of the anaerobic co-digestion of coffee solid waste and sewage sludge was assessed. Five different solid wastes with different chemical properties were studied in mesophilic batch assays, providing basic data on the methane production, reduction of total and volatile solids and hydrolysis rate constant. Most of the wastes had a methane yield of 0.24-0.28 m3 CH4(STP)/kg VS(initial) and 76-89% of the theoretical methane yield was achieved. Reduction of 50-73% in total solids and 75-80% in volatile solids were obtained and the hydrolysis rate constants were in the range of 0.035-0.063 d(-1). One of the solid wastes, composed of 100% barley, achieved a methane yield of 0.02 m3 CH4(STP)/kg VS(initial), reductions of 31% in total solids, 40% in volatile solids and achieved only 11% of the theoretical methane yield. However, this waste presented the highest hydrolysis rate constant. Considering all the wastes, an inverse linear correlation was obtained between methane yield and the hydrolysis rate constant, suggesting that hydrolysis was not the limiting factor in the anaerobic biodegradability of this type of waste. 相似文献