Assessment of the ozone tolerance of two soybean cultivars (Glycine max cv. Sambaíba and Tracajá) cultivated in Amazonian areas

Brazilian soybean cultivars (Glycine max Sambaíba and Tracajá) routinely grown in Amazonian areas were exposed to filtered air (FA) and filtered air enriched with ozone (40 and 80 ppb, 6 h/day for 5 days) to assess their level of tolerance to this pollutant by measuring changes in key biochemical, physiological, and morphological indicators of injury and in enzymatic and non-enzymatic antioxidants. Sambaíba plants were more sensitive to ozone than Tracajá plants, as revealed by comparing indicator injury responses and antioxidant stimulations. Sambaíba exhibited higher visible leaf injury, higher stomatal conductance, and a severe decrease in the carbon assimilation rate. Higher ozone level (80 ppb) caused an increase in cell death in both cultivars. Levels of malondialdehyde and hydrogen peroxide also increased in Tracajá exposed under 80 ppb. Sambaíba plants exhibited decreases in ascorbate and glutathione levels and in enzymatic activities associated with these antioxidants. The higher tolerance of the Tracajá soybean appeared to be indicated by reduced physiological injuries and lower stomatal conductance, which might decrease the influx of ozone and enhance oxidation-reduction reactions involving catalase, ascorbate peroxidase, ascorbate, and glutathione, most likely stimulated by higher hydrogen peroxide.     

Evaluation of the effect of different treatment methods on sugarcane vinasse remediation

Abstract

Sugarcane vinasse is a by-product obtained during ethanol production in sugar-ethanol plants. For each 1?L of ethanol produced approximately 11?L of vinasse are generated. As this residue is obtained in high amounts, it is used as fertilizer in sugarcane crops. However, despite being rich in nutrients, sugarcane vinasse is approximately one hundred times more polluting than domestic sewage, making it an environmental problem. Thus, the aim of the present study was to propose a treatment sequence for sugarcane vinasse and evaluate the possibility of energetic use of the generated sludge in the coagulation/flocculation stage. pH, conductivity, turbidity and decreases in UV/Vis absorption spectra were determined for each treatment step. In addition, the upper calorific value of the generated sludge was also determined, while ash (adsorption treatment) and catalyst (heterogeneous photocatalysis) characterizations were also carried out. At the end of the treatment, initial vinasse turbidity was reduced by 100% and pH and conductivity values were stabilized. The sludge presented a higher calorific value of approximately 3,000?kcal kg^?1 and the ash and catalyst displayed favorable characteristics to be applied to the sugarcane vinasse treatment stages.     

Oxidative DNA damage levels and catalase activity in the clam Ruditapes decussatus as pollution biomarkers of Tunisian marine environment

Levels of the oxidative DNA damage 7, 8-dihydro-8-oxo-2′-deoxyguanosine (8-oxodG) and catalase (CAT) activity were measured in the digestive gland and gills of clams Ruditapes decussatus, related to the presence of pollutants along Tunisian marine environment. Increased levels of CAT were observed in tissues of clams from all the sites studied, compared to control values, and elevated 8-oxodG levels were observed at specific sites. Results obtained in this work indicate that the measurement of 8-oxodG levels and CAT activity in tissues of R. decussatus is promising in pollution monitoring studies of the Tunisian marine environment.     

Association between biotic and abiotic parameters and the occurrence of cyanobacteria in a Brazilian reservoir

The water reservoir of Vargem das Flores, Brazil, has been subject to eutrophication problems. The occurrence of cyanobacterial blooms in this water body has raised concerns regarding the presence of toxic metabolites. In order to understand the factors that promote the proliferation and distribution of cyanobacteria in the reservoir, physicochemical parameters, species composition, and toxicity of the reservoir water column were analyzed at monthly intervals over a 3-year period (2004-2007) using a range of analytical techniques. The results showed that cyanobacteria were absent in the dry period, returning after the onset of stratification. A succession pattern was observed within this group. The Aphanocapsa genus was dominant in the last rainy period of the study (October 2006 to March 2007). However toxicity was only detected when the genera Microcystis and Sphaerocavum were present (October 2005). The principal components analysis showed negative correlation between cyanobacteria and orthophosphate. The change of dominant cyanobacteria along the 3 years of study and the final prevalence of nontoxic genera in the reservoir is an evidence of water quality improvement in response to the management techniques implemented in the reservoir basin.     

A review on human attitudes towards reptiles in Brazil

For many millennia humans and reptiles have interacted, but the attitude of humans towards these animals has depended on culture, environment, and personal experience. At least 719 reptile species are known to occur in Brazil and about 11% of this fauna has been exploited for many different purposes, including bushmeat, leather, ornamental and magic/religious uses, and as folk medicines. Brazil can therefore serve as an interesting case study for better understanding reptile use by human societies, and the present paper catalogues some of the reptile species being used in Brazil and discusses implications for their conservation. A literature review indicated that 81 reptile species are culturally important in this country, with 47 (58%) species having multiple uses, 54 being used for medicinal purposes, 38 as food, 28 for ornamental or decorative purposes, 20 used in magic/religious practices, 18 as pets, and 40 are commonly killed when they come into contact with humans. Regarding their conservation status, 30 (37.5%) are included on State's Red List, Brazilian Red List or the IUCN Red List. There are many forms of interaction between reptiles and humans in Brazil-although most of them are quite negative in terms of wildlife conservation-which reinforces the importance of understanding such uses and interactions in the context of protecting reptiles in Brazil. A better understanding of the cultural, social, and traditional roles of these reptiles is fundamental to establishing management plans for their sustainable use.     

The assessment of particulate matter emitted from stone-crushing industry by correlating rock textures with particles generated after comminution and dispersed in air environment

The generation and emission of particulate matter from abrasion industry are subjects of the pollution monitoring by multidisciplinary study involving earth sciences and engineering disciplines. This work investigates the correlation between textural properties of in situ rock with class size distribution and morphology of particles generated after rock comminution and particles emitted in the air. A special comminution-dust sampling architecture was realised. The combined use of scanning electron microscopy and particle size analyser was considered in performing digital image analysis on both crushed products and airborne particles collected onto membrane filters. The results show that the size and morphology of crushed particles are linked to the petrographic rock properties. In particular, particles with fibrous morphology are prominent in rocks showing foliated textures where elongated minerals occurred, with implication for asbestos-bearing rocks. For what concerns the airborne particles, the results show that their aerodynamic diameters are independent of the crusher operating conditions. External parameters probably intervene in the distribution of the airborne particles emission, including the dynamic air fluxes, or environmental conditions. By applying mathematical models, the morphology and size range of airborne particles following the comminution processes can be predicted, and results has implication for pollutants contamination due to particulate matters emitted by crush stone industry.     

PCDD/Fs atmospheric deposition fluxes and soil contamination close to a municipal solid waste incinerator

Bulk depositions and surface soil were collected in a suburban area, near the Adriatic Sea, in order to assess the contribution of a municipal solid waste incinerator to the area’s total contamination with polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDDs and PCDFs). Samples were collected at two sites, situated in the area most affected by plant emissions (according to the results of the Calpuff air dispersion model), and at an external site, considered as a reference. Results show that the studied area is subject to low contamination, as far as these compounds are concerned. Deposition fluxes range from 14.3 pg m⁻² d⁻¹ to 89.9 pg m⁻² d⁻¹ (0.75 pg-TEQ m⁻² d⁻¹ to 3.73 pg-TEQ m⁻² d⁻¹) and no significant flow differences are observed among the three monitored sites. Total soil concentration amounts to 93.8 ng kg⁻¹ d.w. and 1.35 ng-TEQ kg⁻¹ d.w, on average, and confirms a strong homogeneity in the studied area. Furthermore, from 2006 to 2009, no PCDD/Fs enrichment in the soil was noticed. Comparing the relative congener distributions in environmental samples with those found in stack emissions from the incineration plant, significant differences are observed in the PCDD:PCDF ratio and in the contribution of the most chlorinated congeners. From this study we can conclude that the incineration plant is not the main source of PCDD/Fs in the studied area, which is apparently characterized by a homogeneous and widespread contamination situation, typical of an urban area.     

Intermediate distributions and primary yields of phenolic products in nitrobenzene degradation by Fenton's reagent

Nitrobenzene thermal degradation was investigated using the Fenton reagent in different experimental conditions. Reaction products were analyzed by HPLC, GC-MS, LC-MS and IC. The products obtained at different nitrobenzene conversion degrees show that degradation mainly involves successive hydroxylation steps of the aromatic ring and its subsequent opening followed by oxidation of corresponding aliphatic compounds. Our results show as primary reaction products: 4-nitrophenol, 3-nitrophenol, 2-nitrophenol, phenol and 1,3-dinitrobenzene, indicating that both hydroxylation and nitration reactions are involved. The formation of phenolic products can be explained by postulating an initial step of HO() addition to nitrobenzene ring. The mechanisms of primary reaction pathways are discussed and a detailed kinetic analysis to obtain the true primary yields of phenolic products is proposed. The relative yields observed for nitrophenol isomers do not follow the expected orientation according to deactivating characteristics of the nitro group but significantly depend on Fe(+2), Fe(+3), H(2)O(2) and O(2) concentrations. The understanding of the effect of reaction conditions on the relative product distribution benefits the application of Fenton and Fenton-like systems to waste water treatment.     

Adsorption behavior of α -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of α -cypermethrin [R)-α -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-α-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze α -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time—24 hours for both cork (1–2 mm and 3–4 mm) and GAC. For the studied α -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1–2 mm have the maximum amount of adsorbed α-cypermethrin (q_m) (303 μg/g); followed by GAC (186 μ g/g) and cork 3-4 mm (136 μg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the α -cypermethrin adsorption phenomena on GAC, while α -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing α -cypermethrin from water.     

Herbicide losses in runoff events from a field with a low slope: role of a vegetative filter strip

Herbicide runoff and the effects of a narrow vegetative filter strip (VFS) were studied on an arable field in the low-lying plains of the Veneto Region (north-east Italy). Cultivated plots were compared with and without a 6m wide VFS composed of trees, shrubs and grass. Natural and simulated runoff were monitored during 2000 and 2001. Herbicides applied on the field were: metolachlor (2184-2254 g ha(-1)), terbuthylazine (1000-1127 g ha(-1)) and isoproturon (1000 g ha(-1)). The VFS reduced both runoff depth (10.2-91.2%) and herbicide losses (85.7-97.9%) in the monitored rainfall events. Total herbicide loss with runoff was low (0.69-3.98 g ha(-1) without VFS, less than 0.27 g ha(-1) with VFS), but concentrations were sometimes very high, especially of terbuthylazine and isoproturon during the first events after treatment. In these events there was a high probability of exceeding the ecotoxicological endpoint for algae, but the VFS helped to reduce the potential risk. Two VFS effectiveness mechanisms were identified: (i) dilution, and (ii) a "sponge-like" effect, which temporarily trapped chemicals inside the VFS before releasing them.