Comparison of concentrations of mercury in ambient air to its accumulation by leafy vegetables: An important step in terrestrial food chain analysis

A biomonitoring network with leafy vegetables was established near a chlor-alkali plant in order to compare the accumulation of mercury to the atmospheric total gaseous mercury (TGM) concentration. Based on data obtained in the reference area the ‘normal’ mercury concentration in vegetables is between 0.6 and 5.4 μg kg⁻¹ FW. The effect detection limits (EDLs) are between 1.2 and 11.0 μg kg⁻¹ FW and the biological detection limits (BDLs), the lowest [TGM] that can be detected significantly, are between 3 and 4 ng m⁻³. The accumulation rate is lowest for lettuce and high for curly kale that proved to be an excellent accumulator and as such it is very useful for biomonitoring purposes. A comparison made in the 1980s between biomonitoring results with grass and the mercury concentration in leafy vegetables from private gardens nearby proved to be valid when applied to the current biomonitoring results with vegetables.     

Characterisation of polymer fractions from waste electrical and electronic equipment (WEEE) and implications for waste management

There is an increasing interest in the end-of-life management of polymers present in waste electrical and electronic equipment (WEEE). This is mainly due to high recycling and recovery quotas set by the European WEEE directive, which can only be fulfilled by including the plastic fraction in recycling and recovery approaches. Previous studies identified a high material diversity and various contaminants in WEEE plastics, including heavy metals, polybrominated biphenyls (PBB), diphenyl ethers (PBDE), as well as polybrominated dibenzodioxins and dibenzofurans (PBDD/F). These substances are regulated by European directives that limit their levels in marketable products. Consequently, both material diversity and contaminants are strong arguments against material recycling and point to hazardous waste treatment. However, recent developments in the production of flame retardants and electrical and electronic goods aimed to reduce contaminants and material diversity. Thus, the present study summarises updated contaminant levels of plastic fractions of European WEEE, as well as data on materials in waste housing polymers. Material characterisation revealed housing fractions to be interesting sources for polymer recycling, which however has to implement potent material separation and/or bromine elimination techniques. With respect to contaminants, our data indicate an effective phase-out of PBB, but still high levels of PBDE and PBDD/F are found. Sources and implications for the material recycling and thermal recovery approaches are discussed in detail.     

The Impact of Stratospheric Ozone on Tropospheric Air Quality

A background of ozone (O₃), principally of stratospheric origin, is present in the lower free troposphere. Typical mean O₃ levels of 50 ppb, 40 ppb, and 30 ppb are encountered here in spring, summer, and fall, respectively. Maximum hourly O₃ concentrations which are twice these mean values can be expected. Ozone from the free troposphere is routinely brought down to ground level under turbulent atmospheric conditions. Deep and rapid Intrusions of stratospheric air into the lower troposphere are associated with low-pressure troughs and occur regularly. In the mid troposphere, O₃ levels as high as 300 ppb are found within these intrusions. Observational data showing these intrusions, containing high O₃ concentrations, to directly reach ground level are currently lacking. Over the United States, an intrusion was present aloft on 8 9% of the days in 1978. The frequency, however, is somewhat reduced in summer and a northward movement is evident. During 1978, no intrusion occurred south of 30°N between June and August and none south of 40 °N in August.

The hypothesis that low levels of stratospheric O₃ produce disproportionately large amounts of O₃ in the polluted atmosphere cannot be supported from currently known chemistry but should be studied further. The experimental technique involving a ⁷Be/O₃ ratio to estimate the daily stratospheric component of ground level O₃ is unverified and considered to be inadequate for air quality applications. Estimates resulting from such a technique are considered uncertain by a factor of more than three. Specially designed aircraft studies provide the best means to determine quantitatively the impact of stratospheric O₃ on ground level air quality.     

The social psychology of biodiversity conservation in agriculture

We investigate farmers’ intentions to apply biodiversity conservation practices from a psychological perspective, using an adapted version of the theory of planned behaviour (TPB), including group norms and putting emphasis on moral norms and self-identity. The study is based on a quantitative survey (n = 99) in Belgium, analysed using confirmatory factor analyses and path analysis. Results suggest that the impact of attitudes, social norms and perceived behavioural control on intentions is almost fully mediated through moral norms and self-identity. To have a sustained impact, change actions should strive to embed biodiversity conservation into the social norms and into the good farmer identity of the farming community. While acknowledging the explanatory nature of this study, the findings could suggest another view on how to induce behavioural change.     

稻田土壤种子库研究进展

土壤种子库是指存在于土壤表面和土壤中全部存活种子的总和。稻田土壤种子库是地上杂草产生的根本来源。我国是一个水稻种植大国,目前关于稻田土壤种子库的研究还不够全面和深入。研究稻田土壤种子库对于防治稻田草害具有重要指导意义,同时也是种子库研究领域的一个重要补充。取样方法和取样时间是研究土壤种子库的关键所在。而萌发法是最常见的判定方法。关于稻田土壤种子库大小的结论相差很大,从103~105 m-2不等。稻田土壤种子库中的杂草主要有19科55种,一般的稻田可检出10科或20种左右。种子的垂直分布格局主要受耕作强度的影响。70%~80%甚至更多的杂草种子分布在0~10 cm。稻田土壤种子库由于萌发、捕食、衰老和种子散布等原因具有季节动态。轮作制度、耕作方式、不同施肥处理以及除草方式等对稻田土壤种子库有重要影响。连续多年的田间管理会使种子库的大小、分布和物种组成产生年际变化。目前,需要加强长期定位研究,扩大研究区域和研究内容,重点研究杂草种子的休眠萌发机制和种子命运研究,为杂草治理提供更准确的信息。     

Background levels of heavy metals in surficial sediments of the Gulf of Lions (NW Mediterranean): an approach based on 133Cs normalization and lead isotope measurements

This paper presents an attempt to reach natural background levels of heavy metals in surficial sediments of the Gulf of Lions (NW Mediterranean). To correct for the grain-size effect, normalization procedures based on a clay mineral indicator element are commonly used, after a first grain size separation by sieving. In our study, we tested the applicability of this method with respect to commonly used normalizer elements, and found that stable Cs shows the best ability to reflect the fine sediment fraction. Background levels were successfully reached for Co, Cr, Cu, Ni and Pb, compared to various literature references. Nevertheless, in the case of lead, the normalized data depicted a general enrichment in all samples, and the natural levels could only be reached when concentrations were corrected for the atmospheric contribution by analysing lead isotope ratios. Also for Zn, a general enrichment was found in our samples, although less important.     

Noninvasive characterization of the Trecate (Italy) crude-oil contaminated site: links between contamination and geophysical signals

The characterization of contaminated sites can benefit from the supplementation of direct investigations with a set of less invasive and more extensive measurements. A combination of geophysical methods and direct push techniques for contaminated land characterization has been proposed within the EU FP7 project ModelPROBE and the affiliated project SoilCAM. In this paper, we present results of the investigations conducted at the Trecate field site (NW Italy), which was affected in 1994 by crude oil contamination. The less invasive investigations include ground-penetrating radar (GPR), electrical resistivity tomography (ERT), and electromagnetic induction (EMI) surveys, together with direct push sampling and soil electrical conductivity (EC) logs. Many of the geophysical measurements were conducted in time-lapse mode in order to separate static and dynamic signals, the latter being linked to strong seasonal changes in water table elevations. The main challenge was to extract significant geophysical signals linked to contamination from the mix of geological and hydrological signals present at the site. The most significant aspects of this characterization are: (a) the geometrical link between the distribution of contamination and the site’s heterogeneity, with particular regard to the presence of less permeable layers, as evidenced by the extensive surface geophysical measurements; and (b) the link between contamination and specific geophysical signals, particularly evident from cross-hole measurements. The extensive work conducted at the Trecate site shows how a combination of direct (e.g., chemical) and indirect (e.g., geophysical) investigations can lead to a comprehensive and solid understanding of a contaminated site’s mechanisms.