Expansion of Canopy-Forming Willows Over the Twentieth Century on Herschel Island,Yukon Territory,Canada

Canopy-forming shrubs are reported to be increasing at sites around the circumpolar Arctic. Our results indicate expansion in canopy cover and height of willows on Herschel Island located at 70° north on the western Arctic coast of the Yukon Territory. We examined historic photographs, repeated vegetation surveys, and conducted monitoring of long-term plots and found evidence of increases of each of the dominant canopy-forming willow species (Salix richardsonii, Salix glauca and Salix pulchra), during the twentieth century. A simple model of patch initiation indicates that the majority of willow patches for each of these species became established between 1910 and 1960, with stem ages and maximum growth rates indicating that some patches could have established as late as the 1980s. Collectively, these results suggest that willow species are increasing in canopy cover and height on Herschel Island. We did not find evidence that expansion of willow patches is currently limited by herbivory, disease, or growing conditions.     

A Sampler for Measuring Deposited Fine Sediments in Streams1

Turner, Andy W., Jeff J. Hillis, and Charles F. Rabeni, 2012. A Sampler for Measuring Deposited Fine Sediments in Streams. Journal of the American Water Resources Association (JAWRA) 48(2): 366‐378. DOI: 10.1111/j.1752‐1688.2011.00618.x Abstract: Improvements and standardization of methodologies to quickly and accurately quantify deposited sediment in streams will allow advances in our understanding of biological effects of sedimentation. Most methods used to evaluate streambed conditions as part of biological monitoring or assessment programs are selected for ease of use, but can be subjective, inappropriate, and often of unknown accuracy. We developed a portable, light‐weight device to quantify deposited unconsolidated sediment (particles <2 mm) in wadeable streams. This deposited sediment sampler is a hand‐held unit that circumscribes an area of the streambed and through suction creates a force that suspends unconsolidated materials into a collector. Laboratory evaluations determined the efficiency (percent of available deposited sediment recovered) of the sampler to collect different sizes and concentrations of deposited sediment under differing streambed conditions, which allowed appropriate correction factors to be applied to each of four categories of streambed particle size. Field trials comparing our sampler to other methods commonly used by many state and federal agencies showed high comparability. The sampler can be constructed in just a few hours from inexpensive, easily obtained materials.     

Multi-decadal changes in tundra environments and ecosystems: synthesis of the International Polar Year-Back to the Future project (IPY-BTF)

Understanding the responses of tundra systems to global change has global implications. Most tundra regions lack sustained environmental monitoring and one of the only ways to document multi-decadal change is to resample historic research sites. The International Polar Year (IPY) provided a unique opportunity for such research through the Back to the Future (BTF) project (IPY project #512). This article synthesizes the results from 13 papers within this Ambio Special Issue. Abiotic changes include glacial recession in the Altai Mountains, Russia; increased snow depth and hardness, permafrost warming, and increased growing season length in sub-arctic Sweden; drying of ponds in Greenland; increased nutrient availability in Alaskan tundra ponds, and warming at most locations studied. Biotic changes ranged from relatively minor plant community change at two sites in Greenland to moderate change in the Yukon, and to dramatic increases in shrub and tree density on Herschel Island, and in subarctic Sweden. The population of geese tripled at one site in northeast Greenland where biomass in non-grazed plots doubled. A model parameterized using results from a BTF study forecasts substantial declines in all snowbeds and increases in shrub tundra on Niwot Ridge, Colorado over the next century. In general, results support and provide improved capacities for validating experimental manipulation, remote sensing, and modeling studies.     

Sexual difference in mercury concentrations of lake trout (Salvelinus namaycush) from Lake Ontario

We determined total mercury (Hg) concentrations in 50 female lake trout (Salvelinus namaycush) and 69 male lake trout from Lake Ontario (Ontario, Canada and New York, United States). Results showed that, on average, males were 8% higher in Hg concentration than females in Lake Ontario. We also used bioenergetics modeling to determine whether a sexual difference in gross growth efficiency (GGE) could explain the observed sexual difference in Hg concentrations. According to the bioenergetics modeling results, male GGE was about 3% higher than female GGE, on average. Although the bioenergetics modeling could not explain the higher Hg concentrations exhibited by the males, a sexual difference in GGE remained a plausible explanation for the sexual difference in Hg concentrations of the lake trout. In an earlier study, male lake trout from Lake Ontario were found to be 22% higher in polychlorinated biphenyl (PCB) concentration than females from Lake Ontario. Thus, although males were higher in both Hg and PCB concentrations, the degree of the sexual difference in concentration varied between the two contaminants. Further research on sexual differences in Hg excretion rates and Hg direct uptake rates may be needed to resolve the disparity in results between the two contaminants.     

Public preferences for environmental management practices at DOE's nuclear waste sites

Residents who lived within 50 miles of one of six major US Department of Energy nuclear waste sites were asked in 2005 and again in 2010 to rate environmental management options. Respondents expressed strong preference for continuously sampling the air and water, monitoring worker health, and providing training and equipment to local responders. They strongly supported some site restrictions, such as making sure that the federal government owns the site until no more hazards are present, keeping visitors and recreational users off the site, and requiring government officials to report information to community representatives. The public was much more equivocal about other options, such as restricting new nuclear‐related activities and requiring site managers to live near sites. The authors summarize factors that lead to these public preferences and discuss five population types encountered at these and perhaps other waste management sites. © 2011 Wiley Periodicals, Inc.     

Dissolution kinetics of sub-millimeter Composition B detonation residues: role of particle size and particle wetting

The dissolution of the 2,4,6-trinitrotoluene (TNT), hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) from microscale particles (<250 μm) of the explosive formulation Composition B was examined and compared to dissolution from macroscopic particles (>0.5 mm). The dissolution of explosives from detonation soot was also examined. The measured mass transfer coefficients for the microscale particles were one to two orders of magnitude greater than the macroscopic particles. When normalized to particle surface area, mass transfer coefficients of microscale and macroscale particles were similar, indicating that the bulk dissolution processes were similar throughout the examined size range. However, an inverse relationship was observed between the particle diameter and the RDX:TNT mass transfer rate coefficient ratio for dry-attritted particles, which suggests that RDX may be more readily dissolved (relative to TNT) in microscale particles compared to macroscale particles. Aqueous weathering of larger Composition B residues generated particles that possessed mass transfer coefficients that were on the order of 5- to 20-fold higher than dry-attritted particles of all sizes, even when normalized to particle surface area. These aqueous weathered particles also possessed a fourfold lower absolute zeta-potential than dry-attritted particles, which is indicative that they were less hydrophobic (and hence, more wettable) than dry-attritted particles. The increased wettability of these particles provides a plausible explanation for the observed enhanced dissolution. The wetting history and the processes by which particles are produced (e.g., dry physical attrition vs. aqueous weathering) of Composition B residues should be considered when calculating mass transfer rates for fate and transport modeling.     

Determination of the emissions from an aircraft auxiliary power unit (APU) during the Alternative Aviation Fuel Experiment (AAFEX)

The emissions from a Garrett-AiResearch (now Honeywell) Model GTCP85-98CK auxiliary power unit (APU) were determined as part of the National Aeronautics and Space Administration's (NASA's) Alternative Aviation Fuel Experiment (AAFEX) using both JP-8 and a coal-derived Fischer Tropsch fuel (FT-2). Measurements were conducted by multiple research organizations for sulfur dioxide (SO2, total hydrocarbons (THC), carbon monoxide (CO), carbon dioxide (CO2), nitrogen oxides (NOx), speciated gas-phase emissions, particulate matter (PM) mass and number, black carbon, and speciated PM. In addition, particle size distribution (PSD), number-based geometric mean particle diameter (GMD), and smoke number were also determined from the data collected. The results of the research showed PM mass emission indices (EIs) in the range of 20 to 700 mg/kg fuel and PM number EIs ranging from 0.5 x 10(15) to 5 x 10(15) particles/kg fuel depending on engine load and fuel type. In addition, significant reductions in both the SO2 and PM EIs were observed for the use of the FT fuel. These reductions were on the order of approximately 90% for SO2 and particle mass EIs and approximately 60% for the particle number EI, with similar decreases observed for black carbon. Also, the size of the particles generated by JP-8 combustion are noticeably larger than those emitted by the APU burning the FT fuel with the geometric mean diameters ranging from 20 to 50 nm depending on engine load and fuel type. Finally, both particle-bound sulfate and organics were reduced during FT-2 combustion. The PM sulfate was reduced by nearly 100% due to lack of sulfur in the fuel, with the PM organics reduced by a factor of approximately 5 as compared with JP-8.     

Combined MODFLOW‐FRACTRAN Application to Assess Chlorinated Solvent Transport and Remediation in Fractured Sedimentary Rock

Detailed field investigations and numerical modeling were conducted to evaluate transport and fate of chlorinated solvent contamination in a fractured sedimentary bedrock aquifer (sandstone/siltstone/mudstone) at a Superfund site in central New Jersey. Field investigations provided information on the fractured rock system hydrogeology, including hydraulic gradients, bulk hydraulic conductivity, fracture network, and rock matrix, and on depth discrete contaminant distribution in fractures (via groundwater sampling) and matrix (via detailed subsampling of continuous cores). The numerical modeling endeavor involved application of both an equivalent porous media (EPM) model for flow and a discrete fracture network (DFN) model for transport. This combination of complementary models, informed by appropriate field data, allowed a quantitative representation of the conceptual site model (CSM) to assess relative importance of various processes, and to examine efficacy of remedial alternatives. Modeling progressed in two stages: first a large‐scale (20 km x 25 km domain) 3‐D EPM flow model (MODFLOW) was used to evaluate the bulk groundwater flow system and contaminant transport pathways under historic and current aquifer stress conditions and current stresses. Then, results of the flow model informed a 2‐D DFN transport model (FRACTRAN) to evaluate transport along a 1,000‐m flowpath from the source represented as a 2‐D vertical cross‐section. The combined model results were used to interpret and estimate the current and potential future extent of rock matrix and aqueous‐phase contaminant conditions and evaluate remedial strategies. Results of this study show strong effects of matrix diffusion and other processes on attenuating the plume such that future impacts on downgradient well fields under the hydraulic stresses modeled should be negligible. Results also showed futility of source remediation efforts in the fractured rock, and supported a technical impracticability (TI) waiver for the site. © 2013 Wiley Periodicals, Inc.     

BOP Air Cleaning Experiences

The basic oxygen process of steel manufacture evolves a large volume of gas at high temperature during the oxygen blow. This gas contains finely divided oxide particles that are removed in gas-cleaning equipment. Either electrostatic precipitators or water scrubbers are commonly used for the purpose. These devices are quite efficient but breakdowns, usually in the auxiliary equipment, are frequent. Maintenance problems arise primarily from the high temperature of the gases which warps and cracks the plates in the hood that draws the gases to the cleaning device, and from erosion of piping caused by abrasive particles moving at high velocity. This paper presents a number of case histories of BOP gas-cleaning installations, details maintenance problems, and discusses corrective measures that have been adopted. It gives reasons why merely appropriating a large sum of money for cleaning devices does not always guarantee full abatement of air pollution from the basic oxygen process.     

The Impact of Computers Upon Air Pollution Research

The electronic computer has had a profound effect upon air pollution research activities. This paper discusses some of the ways in which Public Health Service scientists routinely make use of the computer. It is used as a data processor to handle the large volumes of data resulting from continuous air monitoring devices. More importantly, it is used to perform the very complex computations involved in various statistical analyses and mathematical model building. In future years computers may be used on a real-time basis to control the sources which emit pollutants to the atmosphere.