Industry Response to the Challenge of Sustainability: The Case of the Canadian Nonferrous Mining Sector

/ The paper investigates how the Canadian nonferrous sector is tackling the challenge of sustainable development. Although there is no consensus as to what sustainable development means in practice for management in the sector, at least three dimensions must be taken into account: (1) metals are recyclable, the availability of this resource is not a concern for the foreseeable future; (2) the need to minimize environmental impacts of metals exploration, extraction, transformation, consumption, and recycling; and (3) production activities should not be socially or culturally disruptive. The nonferrous mining industry faces several environmental problems. Some of the most significant are acid mine drainage, sulfur emissions, recycling, and metals toxicity. The industry has developed a number of responses to address these specific concerns as well as other more general challenges. Six strategies are described and analyzed: (1) research and development, (2) an effort of consensus building among stakeholders known as the Whitehorse Mining Initiative, (3) international networking, (4) active involvement in the development of environmental management standards, (5) management reorganization and (6) voluntary agreements. The importance of external factors in the shaping of corporate environmental management practices is discussed, in particular the role of government. Progress has been achieved in three areas: (1) managerial practices and organization, (2) reducing the impacts of ongoing operations and (3) minimizing future liabilities, but two significant fields of conflict remain, namely mining in wilderness areas and projects on aboriginal lands.KEY WORDS: Canada; Environmental management; Minerals industry; Nonferrous metals; Sustainable development; Whitehorse Mining Initiative     

Brazil's Electric Power Choices and Their Corresponding Carbon Emissions Implications

This study analyzes the options for meeting power demand in the Brazilianpower sector through the year 2015. Three policy cases are constructedto test economic and environmental policy measures against a baseline:advanced technologies scenario, environmental control scenario and carbon(C) elimination scenario. Least-cost modeling simulated these scenarios throughchanges in emissions fees and caps, costs for advanced technologies,demand side efficiency, and clean energy supplies. Results show that, in theabsence of alternative policies, new additions to Brazil's electric powersector will shift rapidly from hydroelectricity to combined-cycle natural gasplants. When the cost of environmental impacts are incorporated in theprice of power, the least-cost mix of electric power generation technologycould change in other ways. In all scenarios, energy efficiency andcogeneration play an important role in the least-cost power solution. Savingelectricity through increased efficiency offsets the needs for new supply andhas enormous potential in Brazil's industrial sector. Efficiency also reducesthe environmental burden associated with electricity production andtransmission, without compromising the quality of the services demandedby end users. Interesting enough, carbon dioxide (CO₂) emissions will remainrelatively low under almost every conceivable scenario.     

Fluid flow and solute transport in a network of channels

A new model to describe flow and transort in fractured rocks is proposed. It is based on the concept of a network of channels. The individual channel members are given stochastically selected conductances and volumes. Flow-rate calculations have been performed. For large standard deviations in conductances, channeling becomes pronounced with most of the water flowing in a few paths. The effluent patterns and flow-rate distributions obtained in the simulations have been compared to three field measurements in drifts and tunnels of flow-rate distributions. Standard deviations of channel conductances were between 1.6 and 2.4 in some cases. A particle-following technique was used to simulate solute transport in the network. Non-sorbing as well as sorbing solute transport can be simulated. By using a special technique, solutes that diffuse into the rock matrix can also be simulated.     

A practical method for quantification of phosphorus- and glycogen-accumulating organism populations in activated sludge systems.

Enhanced biological phosphorus removal (EBPR) from wastewater relies on the enrichment of activated sludge with phosphorus-accumulating organisms (PAOs). The presence and proliferation of glycogen-accumulating organisms (GAOs), which compete for substrate with PAOs, may be detrimental for EBPR systems, leading to deterioration and, in extreme cases, failure of the process. Therefore, from both process evaluation and modeling perspectives, the estimation of PAO and GAO populations in activated sludge systems is a relevant issue. A simple method for the quantification of PAO and GAO population fractions in activated sludge systems is presented in this paper. To develop such a method, the activity observed in anaerobic batch tests executed with different PAO/GAO ratios, by mixing highly enriched PAO and GAO cultures, was studied. Strong correlations between PAO/GAO population ratios and biomass activity were observed (R2 > 0.97). This served as a basis for the proposal of a simple and practical method to quantify the PAO and GAO populations in activated sludge systems, based on commonly measured and reliable analytical parameters (i.e., mixed liquor suspended solids, acetate, and orthophosphate) without requiring molecular techniques. This method relies on the estimation of the total active biomass population under anaerobic conditions (PAO plus GAO populations), by measuring the maximum acetate uptake rate in the presence of excess acetate. Later, the PAO and GAO populations present in the activated sludge system can be estimated, by taking into account the PAO/GAO ratio calculated on the basis of the anaerobic phosphorus release-to-acetate consumed ratio. The proposed method was evaluated using activated sludge from municipal wastewater treatment plants. The results from the quantification performed following the proposed method were compared with direct population estimations carried out with fluorescence in situ hybridization analysis (determining Candidatus Accumulibacter Phosphatis as PAO and Candidatus Competibacter Phosphatis as GAO). The method showed to be potentially suitable to estimate the PAO and GAO populations regarding the total PAO-GAO biomass. It could be used, not only to evaluate the performance of EBPR systems, but also in the calibration of potential activated sludge mathematical models, regarding the PAO-GAO coexistence.     

A method to estimate emission rates from industrial stacks based on neural networks

This paper presents a technique based on artificial neural networks (ANN) to estimate pollutant rates of emission from industrial stacks, on the basis of pollutant concentrations measured on the ground. The ANN is trained on data generated by the ISCST3 model, widely accepted for evaluation of dispersion of primary pollutants as a part of an environmental impact study. Simulations using theoretical values and comparison with field data are done, obtaining good results in both cases at predicting emission rates. The application of this technique would allow the local environment authority to control emissions from industrial plants without need of performing direct measurements inside the plant.     

Immission patterns of airborne pollutants in Argentina and Germany II. Biomonitoring of organochlorine compounds and polycyclic aromatics

The air pollution profiles of organic xenobiotics (including chlorinated insecticides and benzenes, PCBs and PAHs) were comparatively analyzed in the climatically different regions of Leipzig-Halle (Germany) and Greater Mendoza (Argentina) using two-year-old pine needles (Pinus sylvestris L.) as passive biomonitors. In addition to total compound contents, the levels of potentially bioavailable fraction in the inner needle compartment were determined. The peak levels of chlorinated insecticides and PAHs in an urban park in Mendoza were found to exceed the maximum levels in the Leipzig-Halle region by one to two orders of magnitude, indicating the recent substantial tropospheric input of the compounds from local sources. Bioavailable fractions were observed to exhibit considerable variations for some of these compounds, which became even more distinct when needle samples from Germany and Argentina were compared. Generally speaking, an increase in permeability under semiarid climatic conditions was observed for most of the xenobiotics examined. The discussion of the results reflects the problems associated with using biomonitoring for semivolatile compounds. Interpretation takes into account pollution measurements in the air at Argentine and German reference sites.     

Bioavailability and biodegradation of prosulfocarb in soil

Active microbial degraders of the herbicide prosulfocarb (PSC) were isolated to evaluate their performance in soil with a view to their use for bioremediation. The isolated cultures (a microbial consortium and a Pseudomonas sp. strain) were active when tested in mineral medium with PSC as the only carbon source, but had an adverse effect on the soil indigenous microflora. Biodegradation in the inoculated soils was thus lower than in the uninoculated soil when only the indigenous microflora was present. Further tests showed that the strong affinity of PSC for soil organic matter affected its bioavailability and hence its biodegradation by the inocula. Bioremediation of PSC contaminated soils could thus be undertaken by biostimulation of indigenous microflora.     

Culturability and concentration of indoor and outdoor airborne fungi in six single-family homes

In this study, the culturability of indoor and outdoor airborne fungi was determined through long-term sampling (24-h) using a Button Personal Inhalable Aerosol Sampler. The air samples were collected during three seasons in six Cincinnati area homes that were free from moisture damage or visible mold. Cultivation and total microscopic enumeration methods were employed for the sample analysis. The geometric means of indoor and outdoor culturable fungal concentrations were 88 and 102 colony-forming units (CFU) m(-3), respectively, with a geometric mean of the I/O ratio equal to 0.66. Overall, 26 genera of culturable fungi were recovered from the indoor and outdoor samples. For total fungal spores, the indoor and outdoor geometric means were 211 and 605 spores m(-3), respectively, with a geometric mean of I/O ratio equal to 0.32. The identification revealed 37 fungal genera from indoor and outdoor samples based on the total spore analysis. Indoor and outdoor concentrations of culturable and total fungal spores showed significant correlations (r = 0.655, p<0.0001 and r = 0.633, p<0.0001, respectively). The indoor and outdoor median viabilities of fungi were 55% and 25%, respectively, which indicates that indoor environment provides more favorable survival conditions for the aerosolized fungi. Among the seasons, the highest indoor and outdoor culturability of fungi was observed in the fall. Cladosporium had a highest median value of culturability (38% and 33% for indoor and outdoor, respectively) followed by Aspergillus/Penicillium (9% and 2%) among predominant genera of fungi. Increased culturability of fungi inside the homes may have important implications because of the potential increase in the release of allergens from viable spores and pathogenicity of viable fungi on immunocompromised individuals.     

Detection,Quantification, and Microbial Risk Assessment of Group A Rotavirus in Rivers from Uruguay

Food and Environmental Virology - The aim of this study was to detect, quantify, and assess the risk of infection and illness for Group A Rotavirus (RVA) in the watersheds of the Santa Lucia and...     

Meta-networks for the study of biogeographical traits in ecological networks: the Mexican hummingbird-plant assemblage

Recent studies on ecological networks have quantified the contribution of ecological, historical, and evolutionary factors on the structure of local communities of interacting species. However, the influence of species’ biogeographical traits, such as migratory habits or phylogeographical history, on ecological networks is poorly understood. Meta-networks, i.e., networks that cover large spatial extensions and include species not co-occurring locally, enable us to investigate mechanisms that operate at larger spatial scales such as migratory patterns or phylogeographical distributions, as well as indirect relationships among species through shared partners. Using a meta-network of hummingbird-plant interaction across Mexico, we illustrate the usefulness of this approach by investigating (1) how biogeographical and morphological factors associate with observed interactions and (2) how species-specific biogeographical characteristics associate with species’ network roles. Our results show that all studied hummingbird and plant species in the meta-network were interrelated, either directly or through shared partners. The meta-network was structured into modules, resulting from hummingbirds and plants interacting preferentially with subsets of species, which differed in biogeographical, and, to a lesser extent, morphological traits. Furthermore, migrants and hummingbirds from Nearctic, Transition, and widespread regions had a higher topological importance in the meta-network. Our study illustrates how meta-networks may contribute to our current knowledge on species’ biogeographical traits and biotic interactions, providing a perspective complementary to local-scale networks.