Hydrogeochemical characteristics and assessment of drinking water quality in Zeuss�CKoutine aquifer, southeastern Tunisia

Zeuss?CKoutine aquifer, located in southeastern Tunisia, has been used intensively as a primary source to meet the growing needs of the various sectors. Detailed knowledge of the geochemical evolution of groundwater and water quality can enhance understanding of the hydrochemical system, promoting sustainable development and effective management of groundwater resources. To this end, a hydrochemical and statistical investigation was conducted. Groundwater samples have been collected from 13 wells from 1995 to 2005; to understand the sources of dissolved ions and assess the chemical quality of the groundwater. Results demonstrate that among the cations, only the mean concentrations of Na^?+? exceed guideline values set by the World Health Organization (WHO). Regarding the analyzed anions, the concentration of SO $_{4}^{2-}$ and Cl^??? are above the WHO allowable concentrations. Total dissolved solids in most groundwater samples are greater than 1,000 mg l^???1, the limit set by the WHO, indicating slightly saline or moderately saline water. In general, a significant increase in the degree of water mineralization was observed in the direction of southwest to northeast following the regional flow direction. Calculated saturation indices show that all water samples were oversaturated with respect to aragonite, calcite, and dolomite, and undersaturated with respect to anhydrite, gypsum, and halite. Based on hydrochemical facies, two types of water predominate in the study area. The first is Ca?CNa?CSO₄?CCl in type and located in the southwest which corresponds to the recharge part of the aquifer. The second type is Na?CCa?CCl?CSO₄ and located in the east, which corresponds to the discharge part.     

Fractionation of heavy metals and assessment of contamination of the sediments of Lake Titicaca

Chemical weathering is one of the major geochemical processes that control the mobilization of heavy metals. The present study provides the first report on heavy metal fractionation in sediments (8–156 m) of Lake Titicaca (3,820 m a.s.l.), which is shared by the Republic of Peru and the Plurinational State of Bolivia. Both contents of total Cu, Fe, Ni, Co, Mn, Cd, Pb, and Zn and also the fractionation of these heavy metals associated with four different fractions have been determined following the BCR scheme. The principal component analysis suggests that Co, Ni, and Cd can be attributed to natural sources related to the mineralized geological formations. Moreover, the sources of Cu, Fe, and Mn are effluents and wastes generated from mining activities, while Pb and Zn also suggest that their common source is associated to mining activities. According to the Risk Assessment Code, there is a moderate to high risk related to Zn, Pb, Cd, Mn, Co, and Ni mobilization and/or remobilization from the bottom sediment to the water column. Furthermore, the Geoaccumulation Index and the Enrichment Factor reveal that Zn, Pb, and Cd are enriched in the sediments. The results suggest that the effluents from various traditional mining waste sites in both countries are the main source of heavy metal contamination in the sediments of Lake Titicaca.     

The development of probabilistic models to estimate accident risk (due to runway overrun and landing undershoot) applicable to the design and construction of runway safety areas

The risks of landing overrun (LDOR – LanDing OverRun), Take-off Overrun (TOOR – Take-Off OverRun) and landing undershoot (LDUS – LanDing UnderShoot) are dependent on multiple factors related to operating conditions. These include wind, runway surface conditions, landing or take-off distances required, the presence of obstacles, runway distance available, the existence and dimensions of runway safety areas.In this paper we propose risk models for runway overrun and landing undershoot, using a probabilistic approach. These models are supported by historical data on accidents in the area around the runway and will enable us to determine if the risk level is acceptable or whether action must be taken to mitigate such risks at a given airport. Furthermore, these models permit comparison of the results of different risk mitigation actions in terms of operational risk and safety.The principal advantage of this method is the high quality results obtained for a limited investment in terms of time, computing power and data. As such the method is extremely practical and easy to apply in aerodrome planning, development and operation.     

Estimation of road traffic emission factors from a long term tracer study

Road traffic emissions, one of the largest source categories in megacity inventories, are highly uncertain. It is essential to develop methodologies to reduce these uncertainties to manage air quality more effectively. In this paper, we propose a methodology to estimate road traffic emission factors (EFs) from a tracer experiment and from roadside pollutants measurements. We emitted continuously during about 300 non-consecutive hours a passive tracer from a finite line source placed on one site of an urban street. At the same time, we measured continuously the resulting tracer concentrations at the other side of the street with a portable on-line gas chromatograph. We used n-propane contained in commercial liquid petroleum gas (LPG) as a passive tracer. Propane offers several advantages to traditional tracers (SF6, N2O, CFCs): low price, easily available, non-reactive, negligible global warming potential, and easy to detect with commercial on-line gas chromatographs.The tracer experiment was carried out from January to March 2007 in a busy street of Ho Chi Minh City (Vietnam). Traffic volume, weather information and pollutant concentrations were also measured at the measurement site. We used the results of the tracer experiment to calculate the dilution factors and afterwards we used these dilution factors, the traffic counts and the pollutant concentrations to estimate the EFs. The proposed method assumes that the finite emission line represents the emission produced by traffic in the full area of the street and therefore there is an error associated to this assumption. We use the Computational Fluids Dynamics (CFD) model MISKAM to calculate this error and to correct the HCMC EFs. EFs for 15 volatile organic compounds (VOCs) and NO are reported here. A comparison with available studies reveals that most of the EFs estimated here are within the range of EFs reported in other studies.     

Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data acquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1-200 microg/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 microg/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 mu g/flower and 60 mu g/flower for cv "Extazy" and cv "reina de corazones" watermelons, respectively). One month after treatment, 20 "Extazy" watermelon units (1.5-2 kg/unit) and 20 "Reina de corazones" watermelon units (4-5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 microg/kg.     

Determination of selenium by GFAAS in slurries of fish feces to estimate the bioavailability of this micronutrient in feed used in pisciculture

This paper presents a simple, fast and sensitive method to determine selenium in samples of feces and of fish feed by graphite furnace atomic absorption spectrometry (GFAAS) through the direct introduction of slurries of the samples into the spectrometer's graphite tube. The limits of detection (LOD) and quantification (LOQ) calculated for 20 readings of the blank of the standard slurries (0.50% m/v of feces or feed devoid of selenium) were 0.31 microg l(-1) and 1.03 microg l(-1), respectively, for the standard feces slurries and 0.35 microg l(-1) and 1.16 microg l(-1), respectively, for the standard feed slurries. The proposed method was applied in studies of bioavailability of selenium in different fish feeds and the results proved consistent with that obtained from samples mineralized by acid digestion using the microwave oven.     

Water quality assessment of the Tubarão River through chemical analysis and biomarkers in the Neotropical fish Geophagus brasiliensis

The Tubarão River rises in Santa Catarina, Brazil, and has been historically affected by coal mining activities around its springhead. To evaluate its water conditions, an investigation regarding a possible decontamination gradient associated with the increased river flow toward the estuary, as well as the influence of seasonality over this gradient was performed through a series of biomarkers (vitellogenin, comet assay, lipid peroxidation, protein carbonylation, gluthatione, gluthatione S-transferase, acetylcholinesterase, light microscopy in liver, and scanning electron microscopy in gills) and chemical analysis (polycyclic aromatic hydrocarbons (PAHs) in bile and metal analysis in sediment) in the cichlid Geophagus brasiliensis. Two collections (summer and winter) were made in four distinct sites along the river, while sediments were sampled between those seasons. As expected, the contamination linked exclusively to mining activities was not observed, possibly due to punctual inputs of contaminants. The decontamination gradient was not observed, although seasonality seemed to have a critical role in the responses of biomarkers and availability of contaminants. In the summer, the fish presented higher histopathological damages and lower concentrations of PAHs, while in the winter they showed both higher genetic damage and accumulation of PAHs. The Tubarão suffers impacts from diverse activities, representing health risks for wild and human populations.     

Copper distribution in surface and subsurface soil horizons

The horizons of four natural soils were treated with Cu²⁺ in an acid medium to study the retention capacity of Cu. The possible mineralogical changes arising because of the treatment were also studied. The soil properties and characteristics with the greatest influence on the metal retention and its distribution among the different soil fractions were determined. Crystalline phases of each horizon were determined by X-ray diffraction (XDR). The morphology, structural distribution and particle chemical composition of soil samples were investigated using field emission scanning electron microscopy. Cu distribution in the different geochemical phases of the soil was studied using a sequential extraction. The treatment led to an increase in the amorphous phases and the formation of new crystalline phases, such as rouaite (Cu₂(NO₃)(OH)₃) and nitratine (NaNO₃). Cu was also found superficially sorbed on amorphous hydroxy compounds of Fe that interact with albite, muscovite and gibbsite, and also on spherical and curved particles of aluminium clays. The largest amount of Cu retained was in an exchangeable form, and the smallest amount associated with the crystalline Fe oxides and residual fraction. In the surface horizons, the predominant Cu retention process is complexation in organomineral associations, while in the subsurface horizons it is adsorption.     

A case study of social behaviour in a natural disaster: the olivares landslide (Spain)

The modern sociological literature on disasters highlights the fact that many of the ideas about human behaviour in disasters which were long considered as valid, are wrong. The main discovery is based on the fact that situations of crisis increase people's moral principles and capability of response. This paper illustrates some of these ideas, in a case study of a village which was struck by a natural disaster in the north of Granada (Spain) in 1986. The population's attitude revealed a huge potential of resources that were underestimated by professionals of disaster management. The analysis shows that it is necessary to bring civil protection systems and the population's capability of response into close harmony.     

Multiple-resource modeling as a tool for conservation: Its applicability in Mexico

The current Mexican environmental law provides the legal basis for comprehensive land-use planning. Under the law, development of natural ecosystems must combine goals, policies, and practices towards the sustainable use of natural resources and the protection of biological diversity. Thus, ecosystem manipulation must be able to counter fragmentation of natural ecosystems and isolation of natural reserves, while providing for human needs. Assessment of the potential of natural ecosystems and management impacts are required. Multiple-resource simulation is an assessment and land-use planning tool that permits managers and decision makers to comply with the law, providing a flexible, user-oriented system that can meet the needs of managers, conservationists, and researchers. A multiple-resource model and an example of how it can be applied to meet planning needs is presented for discussion.