Uptake of dioxin-like compounds from sewage sludge into various plant species--assessment of levels using a sensitive bioassay

A bioassay for the detection of dioxin-like compounds was used to estimate uptake of dioxin-like compounds in carrots, oil seed rape seeds, zucchinis and cucumbers grown in soil amended with sewage sludge from Swedish sewage treatment plants (STP). This sensitive bioassay is based on 7-ethoxyresorufin O-deethylase (EROD)-induction in cultured chicken embryo livers and reflects the combined biological effect of all dioxin-like compounds in a sample, including ones that seldom are analyzed. The bioassay detected low concentrations of dioxin-like compounds in all carrot, zucchini and cucumber samples, but did not detect any dioxin-like compounds in the rape seeds. In carrots the concentrations were increased up to seven times when grown in soil amended with high applications of some of the sludge samples, while others did not increase the concentrations compared to control. More realistic sludge applications only increased the concentrations slightly. The sludge-fertilized carrots contained the highest concentrations of the investigated plants (up to 14 pg bioassay-derived TCDD equivalents (bio-TEQs)/g d.w.). In the carrots, differences in uptake of dioxin-like compounds depended on the sludge origin, which may be due to more easily bioaccumulated dioxin-like compounds in some sludge samples, or other components that facilitated uptake into the carrots. In the cucumbers, a more than two-fold increase (from 0.2 to 0.5 pg bio-TEQs/g d.w.) was observed in specimens grown in sludge-amended soil when compared to controls, suggesting a small uptake from the roots to the shoots. No sludge-dependent increase in uptake was seen in the zucchini fruits. The bio-TEQ levels were generally low in the consumable above ground plant parts of the investigated species. However, the question if repeated sludge application results in a soil accumulation of dioxin-like compounds, thereby increasing the risk of plant uptake, remains to be investigated.     

Monitoring, modelling and environmental exposure assessment of industrial chemicals in the aquatic environment

Monitoring and laboratory data play integral roles alongside fate and exposure models in comprehensive risk assessments. The principle in the European Union Technical Guidance Documents for risk assessment is that measured data may take precedence over model results but only after they are judged to be of adequate reliability and to be representative of the particular environmental compartments to which they are applied. In practice, laboratory and field data are used to provide parameters for the models, while monitoring data are used to validate the models' predictions. Thus, comprehensive risk assessments require the integration of laboratory and monitoring data with the model predictions. However, this interplay is often overlooked. Discrepancies between the results of models and monitoring should be investigated in terms of the representativeness of both. Certainly, in the context of the EU risk assessment of existing chemicals, the specific requirements for monitoring data have not been adequately addressed. The resources required for environmental monitoring, both in terms of manpower and equipment, can be very significant. The design of monitoring programmes to optimise the use of resources and the use of models as a cost-effective alternative are increasing in importance. Generic considerations and criteria for the design of new monitoring programmes to generate representative quality data for the aquatic compartment are outlined and the criteria for the use of existing data are discussed. In particular, there is a need to improve the accessibility to data sets, to standardise the data sets, to promote communication and harmonisation of programmes and to incorporate the flexibility to change monitoring protocols to amend the chemicals under investigation in line with changing needs and priorities.     

Lead exposure of small herbivorous vertebrates from atmospheric pollution

Concentrations of Pb in livers of willow grouse (Lagopus lagopus), black grouse (Tetrao tetrix), and hare (Lepus timidus) were determined in samples collected during the period 1990-92 from 77 locations distributed across Norway. Our objective was to elucidate the impact of long-range atmospheric transport on the Pb exposure of the animals. The moss Hylocomium splendens was measured for atmospheric Pb deposition and Pb in soil at 60-cm depth was determined to reflect the natural geochemical background at the study locations. Strong positive relationships were found between Pb in liver and atmospheric deposition of Pb for all species and age groups studied. Results indicate that long-range atmospheric transport was the main source of Pb in the animals studied. This conclusion was supported by Pb analysis of typical food plants for the animals. Correlation between Pb in liver and Pb in soil mineral matter was observed only when considering sites with very low impact of atmospheric deposition. Even though the observed liver Pb concentrations may seem low (< or =12 microg g(-1) dw) they approach levels where sub-lethal effects cannot be ignored.     

Evaluation of ecological disturbance and intrinsic bioremediation potential of pulp mill-contaminated lake sediment using key enzymes as probes

A rapid protocol was developed to measure 10 different enzymic activities from a large number of 1-cm-sliced freshly collected lake sediments. Layers heavily polluted by organic halogens (4900 mg Cl kg(-1)) revealed severe depression of phosphatase, sulfatase, leucine-aminopeptidase, chitinase, acetate esterase and butyrate esterase activities as compared to layers above and below the most polluted zone. alpha-Glucosidase, beta-glucosidase, beta-xylosidase and palmitate esterase were less affected. Methane oxidation potential was dramatically depressed in the polluted strata whereas tetrachloromethane dehalogenating activity was observed in the polluted sediment only. The sediment layers formed after the chlorine discharges into the lake had diminished to 1/10, and showed restoration of the activities close to those observed in non-recipient sediment, in spite of the persisting presence of >1000 mg of organic chlorine (kg dry wt)(-1). We conclude that certain enzymic activities involved in breakdown or oxidation of organic matter in the sediments are useful probes for assessing the degree of ecological damage and its potential for restoration in recipient lakes of industrial discharges.     

Speciated hydrocarbon emissions from small utility engines

Partially speciated hydrocarbon (HC) emissions data from several small utility engines, as measured by a Fourier Transform Infrared analyzer, are presented. The engines considered have nominal horsepower ratings between 3.7 and 9.3 kW. Both side-valve and overhead-valve engines are studied, and four different fuels are used in the engines. The results indicate that the small HCs present in the exhaust tend to be in the form of either methane or unsaturated HCs. Other small alkanes, such as ethane and propane, are present in only relatively small concentrations. In terms of ozone formation potential, the HCs in the form of methane will lead to little ozone, but the distribution of the C2 and C3 species is not ideal from an ozone reduction stand-point. It is also found that the presence of oxygen in the fuels appears to lead to somewhat more complete combustion, although the effects are not large. Finally, the overhead-valve engines appear to have lower HC emissions than side-valve engines, which is primarily due to higher operating A/F ratios and the engine geometry.     

What is the potential measurement error in occupational exposure studies?

This paper demonstrates statistical methods that estimate measurement error from available industrial hygiene data. Errors in measuring a continuous exposure variable may arise when all individuals in a work area are assigned the same exposure. An example is when the mean of exposure measurements obtained on a sample of individuals is assigned to all workers with similar jobs. This may lead to inaccurate point and interval estimates in exposure-response modeling. A method of simulating the distribution of true (i.e., unobserved) individual exposures is described in order to estimate the mean and variance of measurement error. The minimum variance unbiased estimator approximates the mean of lognormally distributed exposure measurements. The distribution of true individual exposures is approximated by the distribution of simulated estimates of mean exposure. The methodology is illustrated by exposure data from work areas manufacturing refractory ceramic fiber (RCF) and RCF products. Results show that exposure is slightly underestimated in work areas with between 25 and 113 exposure measurements; measurement error variance averages about 1.3% of the total variance.     

Demonstrating Floodplain Uncertainty Using Flood Probability Maps1

Abstract: The U.S. Federal Emergency Management Agency (FEMA) flood maps depict the 100‐year recurrence interval floodplain boundary as a single line. However, because of natural variability and model uncertainty, no floodplain extents can be accurately defined by a single line. This article presents a new approach to floodplain mapping that takes advantage of accepted methodologies in hydrologic and hydraulic analysis while including the effects of uncertainty. In this approach, the extents of computed floodplain boundaries are defined as a continuous map of flood probabilities, rather than as a single line. Engineers and planners can use these flood probability maps for viewing the uncertainty of a floodplain boundary at any recurrence interval. Such a flood probability map is a useful tool for visualizing the uncertainty of a floodplain boundary and represents greater honesty in engineering technologies that are used for flood mapping. While institutional barriers may prevent adoption of such definitions for use in graduated flood insurance rates (as most other insurance industries use to account for relative risks), the methods open the door technically to such a reality.     

Fish bioassay monitoring of waste effluents

Spills of toxic materials into bodies of water receiving industrial waste discharges can be prevented only if frequent or continuous assessments of effluent quality can be made. Currently available methods can automatically measure individual physical or chemical waste components but cannot assess toxicity caused by the interaction of components or the presence of an unsuspected material. Aquatic organisms, in contrast, respond to their total environment and in this way integrate the effects of all the various chemical and physical waste parameters.This study evaluates the possibility of using the continuously and automatically recorded responses of fish to monitor the toxicity of industrial waste effluents. A review of previously developed toxicity monitoring systems is followed by a field evaluation of a method that uses the computer-monitored ventilatory patterns of 12 bluegills (Lepomis macrochirus Rafinesque) to monitor the toxicity of an industrial waste effluent as it flows into a river. No known toxic spills occurred in the effluent during the operation of this system, but acetone added to the effluent waste caused responses from the fish at concentrations which peaked near the 96-hr LC₅₀ level. Some responses were also noted when no known toxicant was present; these were related to environmental disturbances and system design problems. Recommendations are made for the design of future biologic monitoring units.