Living with Wildlife and Mitigating Conflicts Around Three Indian Protected Areas

Crop and livestock losses to wildlife are a concern for people neighboring many protected areas (PAs) and can generate opposition to conservation. Examining patterns of conflict and associated tolerance is important to devise policies to reduce conflict impacts on people and wildlife. We surveyed 398 households from 178 villages within 10 km of Ranthambore, Kanha, and Nagarahole parks in India. We compared different attitudes toward wildlife, and presented hypothetical response scenarios, including killing the problem animal(s). Eighty percent of households reported crop losses to wildlife and 13 % livestock losses. Higher crop loss was associated with more cropping months per year, greater crop variety, and more harvest seasons per year but did not vary with proximity to the PA, suggesting that PAs are not necessarily “sources” for crop raiders. By contrast, complaints of “depredating carnivores” were associated with people-grazing animals and collecting resources from PAs. Many households (83 %) engaged in mitigation efforts. We found that only fencing and guard animals reduce crop losses, and no efforts to lower livestock losses. Contrary to our expectations, carnivores were not viewed with more hostility than crop-raiding wildlife. Households reported greater inclination to kill herbivores destroying crops or carnivores harming people, but not carnivores preying on livestock. Our model estimated crop loss was 82 % across surveyed households (highest in Kanha), while the livestock loss experienced was 27 % (highest in Ranthambore). Our comparative study provides insights into factors associated with conflict loss and tolerance, and aids in improving ongoing conservation and compensation efforts.     

SEASONAL OCCURRENCE OF ANNUAL FLOODS ON SMALL PENNSYLVANIA WATERSHEDS1

A study is presented of the months in which the instantaneous annual maximum discharges from 66 watersheds occurred. The 2,052 flood values were measured on areas ranging from 2.4 through 214 square miles. The longest record was 60 years; the three shortest were 20. Pictorial results show both the number of floods for each month and individual discharges relative to the mean flood. A parameter which is weighted in this manner accounts for both the incidence and the magnitude of floods. Peculiarities of flood-timing charts, based on this parameter, are discussed with respect to watershed size, soils, geology, and land use. After anomolous watersheds had been assigned to special categories, flood-timing charts from most records exhibit a regional dichotomy dividing eastern from western Pennsylvania.     

VILLAGE DEMONSTRATION OF BIOGAS TECHNOLOGY: AN EGYPTIAN CASE STUDY

Within the context of biogas R & D and demonstration project undertaken by the Egyptian National Resarch Centre, village demonstrations are of paramount importance. In this paper, a case study of a pioneering village demonstration is presented. Based on a preliminary sociological survey, “Al Manawat” - a traditional Egyptian village was selected for the first demonstration. After a short orientation phase through which the biogas technology was introduced to a group of village representatives, a family was selected to conduct the demonstration experiment. Concomitant with the family energy requirements, availability of digester feed materials, site characteristics and other relevant factors, a family-size unit of a modified Indian type was designed and erected by the side of the farmer's house. The digester effective volume is 9 cu.m. and is connected to both a latrine and animal shed. The unit has been successfully operated since May 1981. The highlights of the construction stage as well as the unit performance characteristics are discussed. A preliminary techno-economic appraisal is also outlined. Finally, social impacts are assessed. Initial results indicate that under the Egyptian village conditions, and particularly with the heavily subsidized fuel prices, the high saving in manure transport attained through the introduction of the biogas unit, appears to be the main benefit from the farmer's point of view. Dans le cadre de la recherche et du développement du gaz de fermentation et d'un projet pilote entrepris par le Centre national de recherche égyptien, les démonstrations faites dans les villages occupent une place prépondérante. Dans cet article, l'auteur présente le cas-type d'une démonstration pilote faite dans un village. En se basant sur une enquêue sociologique préliminaire, “Al Manawat”, qui est un village égyptien traditionnel, a été choisi comme lieu de la première démonstration. Après une courte phase d'orientation au cours de laquelle le technologie du gaz de fermentation a été présentée à un groupe de notables du village, on a choisi une famille pour effectuer la démonstration expérimentale. En même temps que l'on étudiait les besoins énergétiques de cette famille, la disponibilité de matières de base de fermentation, les caractéristiques de l'emplacement et tous autres facteurs pertinents, une unité familiale de type indien modifié a été con?ue et érigée à côté de la ferme. Le composteur, d'un volume utile de matières premières de 9 m³, est relié à la fois aux latrines et à l‘étable. Cette unité fonctionne avec satisfaction depuis le mois de mai 1981. L'article met en avant les points essentiels des étapes de la construction et les caractéristiques de rendement de l'unité de fermentation. Il esquisse une évaluation technico-économique préliminaire et fait l'estimation des retombées sociales. Les premiers résultats montrent que, dans le cadre du village égyptien et particulièrement du fait que les prix du fuel sont largement subventionnés, les économies importantes réalisées dans le transport du fumier grâce á l'introduction de l'unité de fermentation semblent étre, du point de vue du fermier, le bénéfice principal. Dentro del contexto del proyecto de I & D y demostración realizado por el Centro de Investigación Nacional de Egipto, la demostración en los villorrios es de suma importancia. Este artículo presenta un caso pionero de este tipo. Basado en encuestas sociológicas, un villorrio tradicional de Egipto, “Al Manawat” fue selectiondo para la primera demostración. Después de una fase corta de orientación en la que se introdujo la tecnologia del biogás a los representantes del villorrio, se seleccionó una familia con cuya colaboración se Ilevaria a cabo el experimento. Teniendo en cuenta las necesidades de energia de la familia, la disponibilidad de materia prima para el digestor, las caracter ísticas del lugar y otros factores importantes, se diseñó y construyó un digestor de tamaño familiar, usando un modelo Indio, al lado de la casa de la familia. El volumen efectivo del digestor es 9 metros cúbicos y está conectado a la letrina y al corral de animales. La unidad está funcionando con éxito desde Mayo de 1981. Se discuten aspectos de la etapa de construcción y las características de operación. Se hace también una evaluación técnico-económica preliminar. Finalmente se evalúa el impacto social de la experiencia. Los resultados indican que en las condiciones de los villorrios Egipcios, especialmente en condiciones de precios de combustibles altamente sub-sidiados, los grandes ahorros en el transporte de abono debido a la introducción del digestor de biogas parece ser el mayor beneficio desde el punto de vista de la familia.     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

Removal of Pb(II) ions from aqueous solution using activated tea waste: Adsorption on a fixed-bed column

An inexpensive and effective adsorbent was developed from waste tea leaves for the dynamic uptake of Pb(II). Characterization of the adsorbents showed a clear change between physico-chemical properties of activated tea waste and simply tea waste. The purpose of this work was to evaluate the potential of activated tea waste in continuous flow removal of Pb(II) ions from synthetic aqueous effluents. The performance of the system was evaluated to assess the effect of various process variables, viz., of bed height, hydraulic loading rate and initial feed concentration on breakthrough time and adsorption capacity. The shape of the breakthrough curves was determined for the adsorption of Pb(II) by varying different operating parameters like hydraulic loading rate (2.3–9.17 m³/h m²), bed height (0.3–0.5 m) and feed concentration (2–10 mg/l). An attempt has also been made to model the data generated from column studies using the empirical relationship based on the Bohart–Adams model. There was an acceptable degree of agreement between the data for breakthrough time calculated from the Bohart–Adams model and the present experimental study with average absolute deviation of less than 5.0%. The activated tea waste in this study showed very good promise as compared with the other adsorbents available in the literature. The adsorbent could be suitable for repeated use (for more than four cycles) without noticeable loss of capacity.