基于MODIS数据的安徽区域日蒸散量估算与分析

蒸散的估算在区域能量平衡和水资源研究中具有重要意义,遥感技术发展促进了区域蒸散的研究。利用安徽省气象资料、MODIS数据产品及GIS背景信息,基于SEBAL模型,按1 km空间分辨率进行了面尺度的安徽省日蒸散量估算,并在GIS空间分析模块的支持下对不同土地覆盖类型的日蒸散量进行统计分析。结果表明：遥感估算的蒸散量与利用Penman Monteith公式计算的蒸散量比较,两者之间具有较好的相关性,遥感蒸散估算值整体偏小,不同土地利用类型的日蒸散量间差异显著。遥感蒸散估算方法在安徽省具有一定的实用性,需优化模型参数,以提高其进一步技术推广的前景     

Potential utilization of burned wood in manufacture of medium density fiberboard

The potential utilization of burned wood in the manufacture of medium density fiberboard (MDF) was investigated. For this aim, the MDF panels were made of various mixtures of burned pine wood (Pinus sylvestris L.), unburned beech (Fagus orientalis L.) and oak (Ouercus robur L.) woods under commercial conditions in an MDF company. The mixture ratio of the unburned beech and oak woods to the burned pine wood were 50/50 wt%. The mixing ratios of burned wood chips with unburned wood chips were 0:100, 25:75, 50:50, 75:25 and 100:0, %, respectively. A commercial urea–formaldehyde resin was used as a binder. The physical properties measured in the investigation included density and thickness swelling, while the mechanical properties examined were bending strength, modulus elasticity, internal bond, screw holding ability perpendicular to the plane of panel, and janka hardness perpendicular to the plane of the panel. Surface roughness and color of the panels were also measured. The results indicated that all the panels met the mechanical properties of general-purpose MDF requirements of EN 622-5. The surface roughness of the MDF panels containing burned wood decreased with increasing burned wood content but remained higher than the control panels. The dimensional stability of the MDF panels decreased with the incorporation of burned wood fibers as compared with the control MDF panels.     

Comparative Thermodynamic Study on the Contribution of the Autocondensation and Copolymerization Reactions for the Tannins of the Subspecies of Acacia nilotica

Autocondensation and copolymerization reactions of the Acacia nilotica subspecies tomentosa (Ant) and the subspecies adansonii (Ana) tannins extracts solutions have been studied at several pH values by thermomechanical analyzer. Results of chemical analysis of these tannins revealed that the studied tannins, Ant and Ana contained high percentages of extractable tannins (54 and 57 %) for and polyphenolic materials (78 and 80 %) respectively. Different hardeners such as paraformaldehyde, Urea and pMDI were added at different ratios and their polycondensation reactions was studied and compared with their autocondensation ones. The aim was to evaluate the tannins suitability for the production of commercially and technically viable tannin adhesives with reduced Formaldehyde emission for wood products and to study the interference between the autocondensation and the copolymerization reaction. The obtained results of autocondensation reaction for both of the tannins studied showed that the best Young’s modulus values for Ant (3,500 and 2,750 MPa) and Ana (2,650 and 2,620 MPa) were obtained at pH 5 and 7. The Young’s modulus values obtained by the tannins Ant were higher than those achieved by Ana. This indicates that the Ant is more reactive than Ana. These results were also in line with results achieved by the gel time for both of the tannins. Gel time results indicate that the reactivity of both tannins increased towards alkalinity with Ana being more reactive at alkaline pH. Addition of 8 % of paraformaldehyde was adversely affecting the autocondensation reactions, as the best Young’s modulus values were achieved at pH 4 for Ant tannins. As for Ana the higher Young’s modulus values (2,000 and 2,310 MPa) were achieved at pH 5 and 7. This indicates that autocondensation reaction was contributed to the final network of the copolymerization reaction. When smaller ratio of paraformaldehyde and Urea (5 %) was added to Ant tannins it favors the autocondensation reaction and the best Young’s modulus values were obtained at pH 5 and 7. Addition of pMDI (10–30 %) was found to decrease the temperature of copolymerization and the obtained Young’s modulus values by Ant were lower than those obtained by autocodensation reaction. Best Young’ modulus values were obtained by Ant at pH 5 and 7. Ana gave the best Young’s modulus values at pH 4 and 5 indicating that the autocondensation appears to depress the copolymerization reactions. The obtained results by both reactions were very important from technical and economical point of view as they concluded that it is very possible to produce adhesives system with zero emission depending on the tannins autocondensation reaction and pH values. Reduction of formaldehyde emission was also possible upon addition of smaller amount of paraformaldehyde and Urea.     

报废汽车拆解利用循环产业链建设的初步探讨

在分析我国报废汽车拆解与利用行业的发展现状、存在问题和严峻的环境影响基础上,依据循环经济的理念,吸取发达国家经验,并结合中国国情,对建立报废汽车拆解与利用循环产业模式进行了初步探讨,并对于汽车拆解与利用循环产业链的建设提出了相关建议.     

阿什河水系枯水期氮污染特征与同位素源解析

在阿什河水系设置20个采样点,采用水质监测技术和稳定氮同位素示踪技术,研究了枯水期阿什河氮污染特征和硝酸盐氮污染来源。结果表明:(1)阿什河枯水期大部分采样点氨氮浓度较低,大部分区域达到或优于《地表水环境质量标准》(GB3838—2002)中Ⅲ类。上游河段硝酸盐氮浓度较低,中游河段较高,到下游河段略有降低。总氮浓度较高,最高达19.4mg/L。(2)阿什河水系采样点15 N的丰度(δ15 N)主要处于0.11%~0.21%、0.42%~0.78%、0.83%~0.88%和1.09%~1.26%。稳定15 N同位素示踪解析阿什河硝酸盐氮污染来源表明,阿什河上游污染源主要为大气沉降、土壤有机氮和人工化肥;中游主要受畜禽养殖污水和生活污水污染;下游主要受城镇生活污水和工业废水影响。     

湖库型水体总氮总量控制目标的区域分配研究

基于层次分析法原理,以资源禀赋、社会经济、农业生产生活、污染治理水平为主要考虑因素设计指标体系和层次结构,建立了湖库型水体总氮总量控制目标分配方法,并在石头口门水库流域进行了应用,为湖库型水体总氮总量控制目标分配及石头口门水库流域总氮总量控制提供借鉴。     

纺织服装全球回收标准概述

纺织服装全球回收标准是由荷兰管制联盟认证机构最初制定,于2008年11月起实施,该认证标准是针对废旧纺织品回收后,再生纤维原料使用时,提供一个全球性认证标准.该标准先后经过3次修订,2014年8月5日,纺织服装全球回收标准（GRS）3.0版颁布.目前已得到各国纺织出口企业的认可.     

Growth,photosynthesis and removal responses of the cyanobacteria Chroococcus sp. to malathion and malaoxon

Abstract

Malathion is an organophosphorus pesticide widely used in agricultural crops, despite its toxicity. In addition, malaoxon occurs by oxidation of malathion being more toxic. The toxic effects of malathion and malaoxon in humans include hepatoxicity, breast cancer, genetic damage and endocrine disruption. The aim of this study involved assessing the effect of malathion commercial grade on Chroococcus sp., and its potential as an alternative to the removal of this pesticide and its transformation product such as malaoxon. We evaluated the effect of malathion at different concentrations (1, 25, 50, 75 and 100?ppm) on the biomass of the cyanobacteria Chroococcus sp. grown in medium BG-11; also, we analyse its ability to degrade both malathion and malaoxon into a temperature of 28?±?2?°C and at pH 6. The results showed that 50?ppm of malathion the cyanobacteria Chroococcus sp. reached the highest removal efficiency of malathion and malaoxon (69 and 65%, respectively); also, the growth rate of Chroococcus sp. increased without inhibiting the production of chlorophyll “a”, this can be explained by the hormesis phenomenon. Therefore, we consider that the cyanobacteria Chroococcus sp. may be a good candidate for bioremediation of aquatic systems contaminated with organophosphorus pesticides such as malathion and its transformation product such as malaoxon.     

渠县近5年大气污染特征及预测分析

本文应用污染损害综合指数法,分析了四川省渠县近5年来的大气变化及其危害程度,并运用GM(1,1)模型对渠县未来8年的大气状况作预测。结果表明,渠县大气环境主要污染物为可吸入微粒,其浓度变化呈逐年下降趋势,从2008年开始TSP有明显下降,SO2与NO2含量较低并且比较稳定。通过GM(1,1)模型对渠县空气质量进行预测得知,SO2、NO2逐渐下降,TSP的浓度将大幅度下降,在未来的8年里渠县的空气环境质量得到大幅度的提高。     

牦牛坪稀土矿区生态环境现状及治理建议

本文通过对牦牛坪矿区的生态环境现状进行调查、分析,针对破坏和污染现状提出针对性的治理建议,为促进四川省稀土行业生态发展、实现矿区经济、社会、环境效益的协调发展提供参考。