Biodegradation assessment of PLA and its nanocomposites

Poly(lactic acid) nanocomposites containing Cloisite 15A, Cloisite 30B, and Dellite 43B were prepared by melt-mixing in a batch mixer and were exposed to UV radiation, temperature, and microorganism in solution and in a compost. Exposed samples, collected along the time, were characterized by several techniques. While the addition of organoclays had a positive effect on thermal stability, the degradation rate of nanocomposites increased when exposed to UV radiation and microorganism. Moreover, the degradation rate depends on the organoclay type. Even though the degradation rate is higher for nanocomposites, Fourier transform infrared spectrometry and gel permeation chromatography results demonstrated that the degradation mechanism is the same.     

Detection of hormones in surface and drinking water in Brazil by LC-ESI-MS/MS and ecotoxicological assessment with <Emphasis Type="Italic">Daphnia magna</Emphasis>

The growing use of pharmaceutical drug is mainly due to several diseases in human and in animal husbandry. As these drugs are discharged into waterways via wastewater, they cause a major impact on the environment. Many of these drugs are hormones; in which even at low concentrations can alter metabolic and physiological functions in many organisms. Hormones were found in surface water, groundwater, soil, and sediment at concentrations from nanograms to milligrams per liter of volume—quantities known to cause changes in the endocrine system of aquatic organisms. This study aimed to develop a methodology for hormone detection (estriol, estrone, 17β-estradiol, 17α-ethinylestradiol, progesterone, and testosterone) on surface and treated water samples. Sample toxicity was assessed by ecotoxicology tests using Daphnia magna. A liquid chromatograph coupled to a mass spectrometer with an electrospray ionization source (LC-ESI-MS/MS) was used for the analysis. The results showed that samples were contaminated by the hormones estriol, estrone, progesterone, 17β-estradiol, and 17α-ethinylestradiol during the sampling period, and the highest concentrations measured were 90, 28, 26, 137, and 194 ng·L^?1, respectively. This indicates the inflow of sewage containing these hormones at some points in the Piracicaba River in the State of Sao Paulo—Brazil. Results indicated little toxicity of the hormone estriol in D. magna, indicating that chronic studies with this microcrustacean are necessary.     

Sub-tropical urban environment affecting content and composition of non-structural carbohydrates of Lolium multiflorum ssp. italicum cv. Lema

This study analyzed the relationship between environmental factors, especially air pollution and climatic conditions, and non-structural carbohydrates (NSC) in plants of Lolium multiflorum exposed during 10 consecutive periods of 28 days at a polluted site (Congonhas) and at a reference site in São Paulo city (Brazil). After exposure, NSC composition and leaf concentrations of Al, Fe, Cu, Zn, Pb and Cd were measured. The seasonal pattern of NSC accumulation was quite similar in both sites, but plants at Congonhas showed higher concentrations of these compounds, especially fructans of low and medium degree of polymerization. Regression analysis showed that NSC in plants growing at the polluted site were explained by variations on temperature and leaf concentration of Fe (positive effect), as well as relative humidity and particulate material (negative effect). NSC in the standardized grass culture, in addition to heavy metal accumulation, may indicate stressing conditions in a sub-tropical polluted environment.     

Dioxin- and POP-contaminated sites—contemporary and future relevance and challenges

BACKGROUND, AIM AND SCOPE: Once they have been generated, polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and other persistent organic pollutants (POPs) can persist in soils and sediments and in waste repositories for periods extending from decades to centuries. In 1994, the US EPA concluded that contaminated sites and other reservoirs are likely to become the major source of contemporary pollution problems with these substances. With this in mind, this article is the first in a new series in ESPR under the title 'Case Studies on Dioxin and POP Contaminated Sites--Contemporary and Future Relevance and Challenges', which will address this important issue. The series will document various experiences from sites contaminated with PCDD/F and other POPs. This article provides an overview of the content of the articles comprising the series. In addition, it provides a review of the subject in its own right and identifies the key issues arising from dioxin/POP-contaminated sites. Additionally, it highlights the important conclusions that can be drawn from these examples. The key aim of this article and of the series as a whole is to provide a comprehensive overview of the types of PCDD/F contaminated sites that exist as a result of historical activities. It details the various processes whereby these sites became contaminated and attempts to evaluate their contemporary relevance as sources of PCDD/Fs and other POPs. It also details the various strategies used to assess these historical legacies of contamination and the concepts developed, or which are under development, to effect their remediation. MAIN FEATURES: Special sessions on 'Contaminated sites--Cases, remediation, risk and policy' were held at the DIOXIN conferences in 2006 and 2007, and this theme will be continued at DIOXIN 2008 to be held in Birmingham. Selected cases from the approximately 70 contributions made to these sessions, together with some additional invited case studies are outlined together with the key issues they raise. By evaluating these cases and adding details of experiences published in the current literature, an overview will be given of the different features and challenges of dioxin and POP-contaminated sites. RESULTS: This article provides a systematic categorisation of types of PCDD/F and POP-contaminated sites. These are categorised according to the chemical or manufacturing process, which generated the PCDD/Fs or POPs and also includes the use and disposal aspects of the product life cycle in question. The highest historical PCDD/F and dioxin-like polychlorinated biphenyl (PCB) contamination burdens have arisen as a result of the production of chlorine and of chlorinated organic chemicals. In particular, the production of chlorinated pesticides, PCBs and the related contaminated waste streams are identified being responsible for historical releases of toxic equivalents (TEQs) at a scale of many tonnes. Along with such releases, major PCDD/F contaminated sites have been created through the application or improper disposal of contaminated pesticides, PCBs and other organochlorine chemicals, as well through the recycling of wastes and their attempted destruction. In some extreme examples, PCDD/F contaminated sites have also resulted from thermal processes such as waste incinerators, secondary metal industries or from the recycling or deposition of specific waste (e.g. electronic waste or car shredder wastes), which often contain chlorinated or brominated organic chemicals. The examples of PCDD/F and dioxin-like PCB contamination of fish in European rivers or the impact of contaminated sites upon fishing grounds and upon other food resources demonstrate the relevance of these historical problems to current and future human generations. Many of the recent food contamination problems that have emerged in Europe and elsewhere demonstrate how PCDD/F and dioxin like PCBs from historical sources can directly contaminate human and animal feedstuffs and indeed highlight their considerable contemporary relevance in this respect. Accordingly, some key experiences and lessons learnt regarding the production, use, disposal and remediation of POPs from the contaminated sites are summarised. DISCUSSION: An important criterion for evaluating the significance and risks of PCDD/Fs and other POPs at contaminated sites is their present or future potential for mobility. This, in turn, determines to a large degree their propensity for off-site transport and environmental accessibility. The detailed evaluation of contaminated site cases reveals different site-specific factors, which influence the varied pathways through which poor water-soluble POPs can be mobilised. Co-contaminants with greater water solubility are also typically present at such sites. Hence, pumping of groundwater (pump and treat) is often required in addition to attempting to physically secure a site. At an increasing number of contaminated sites, securing measures are failing after relatively short time spans compared to the time horizon, which applies to persistent organic pollutant contamination. Due to the immense costs and challenges associated with remediation of contaminated sites 'monitored natural attenuation' is increasingly gaining purchase as a conceptual remediation approach. However, these concepts may well prove limited in their practical application to contaminated sites containing persistent organic pollutants and other key pollutants like heavy metals. CONCLUSIONS: It is inevitable, therefore, that dioxin/POP-contaminated sites will remain of contemporary and future relevance. They will continue to represent an environmental issue for future generations to address. The securing and/or remediation of dioxin/POP-contaminated sites is very costly, generally in the order of tens or hundreds of millions of dollars. Secured landfills and secured production sites need to be considered as constructions not made for 'eternity' but built for a finite time scale. Accordingly, they will need to be controlled, supervised and potentially repaired/renewed. Furthermore, the leachates and groundwater impacted by these sites will require ongoing monitoring and potential further remediation. These activities result in high maintenance costs, which are accrued for decades or centuries and should, therefore, be compared to the fully sustainable option of complete remediation. The contaminated site case studies highlight that, while extensive policies and established funds for remediation exist in most of the industrialised western countries, even these relatively well-regulated and wealthy countries face significant challenges in the implementation of a remediation strategy. This highlights the fact that ultimately only the prevention of contaminated sites represents a sustainable solution for the future and that the Polluter Pays Principle needs to be applied in a comprehensive way to current problems and those which may emerge in the future. RECOMMENDATIONS AND PERSPECTIVES: With the continuing shift of industrial activities in developing and transition economies, which often have poor regulation (and weak self-regulation of industries), additional global challenges regarding POPs and other contaminated sites may be expected. In this respect, a comprehensive application of the "polluter pays principle" in these countries will also be a key to facilitate the clean-up of contaminated areas and the prevention of future contaminated sites. The threats and challenges of contaminated sites and the high costs of securing/remediating the problems highlight the need for a comprehensive approach based upon integrated pollution prevention and control. If applied to all polluting (and potentially polluting) industrial sectors around the globe, such an approach will prove to be both the cheapest and most sustainable way to underpin the development of industries in developing and transition economies.     

Photocatalytic degradation of lignin and lignin models, using titanium dioxide: the role of the hydroxyl radical

The role of hydroxyl radicals on the degradation of lignins during a cellulosic pulp bleaching process including a photocatalytic stage, was assessed using peroxyformic acid lignins EL1 and REL1 and two phenolic niphenyl lignin models 1 and 2. The irradiations were performed in the absence of photocatalyst TiO2 and H2O2 (condition a), in the presence of TiO2 (condition b) and in the presence of H2O2 (condition c). The experiments were conducted in alkaline (pH approximately 11) aqueous ethanol solutions with oxygen bubbling. The relative phenolic content of the irradiated solutions, which is indicative of the involvement of hydroxyl radicals, was determined by ionization absorption spectroscopy. The results obtained show that the catalyzed reaction involves both degradation of the phenolate groups by electron transfer and hydroxylation of the lignin aromatic structure. Benzyl alcohol structural elements in sodium borohydride reduced lignin REL1 and compound 2 were also found as good trapping agents for the hydroxyl radicals. The degradation of EL1 was studied by measuring its fluorescence emission by comparison to the fluorescence of compound 2. The emission spectra indicate that some biphenyl phenolate anions in EL1 are reacting under UV/visible irradiation and some others, probably polyphenolic chromophores emitting less fluorescence, are formed.     

Pulp and paper plant wastes valorisation in bituminous mixes

Nowadays, the increasing amount of wastes is a concerning reality and the environmental aspects has become a major priority. Following this worry, the purpose of this experimental study was to investigate the possibility of using pulp and paper inorganic wastes, named dregs and grits, in bituminous mixtures as aggregate replacement to reduce environmental effects of these wastes disposal.First, the wastes were chemically and physically characterized and also tested primarily taking into account the requirements for aggregates in bituminous mixtures. Then, formulations were prepared replacing aggregates with wastes in different amounts. The mechanical properties of these mixtures containing wastes were compared with reference samples based on standard methods.According to the results it was possible to verify that grits had a good performance and it might be directly tested industrially as an aggregate in road construction. On the other hand, dregs need to be treated before incorporation to guarantee stable mixes in terms of water sensitivity.