Application of indoxacarb for managing shoot and fruit borer of eggplant (Solanum melongena L.) and its decontamination

Indoxacarb was applied at 75 and 150 g a.i. ha^{? 1} for two years to an eggplant (Solanum melongena L.) crop grown in the field plots in order to evaluate its efficacy for management of the lepidopteron pest, shoot and fruit borer. The residues of the insecticide were quantified by high-pressure liquid chromatography (HPLC). The mean initial deposits of indoxacarb on eggplant fruits were found to be 2.60–2.634 mg kg^{? 1} and 3.64–3.68 mg kg^{? 1} from the two rates of applications, respectively. They declined with time and reached to non-detectable (< 0.02 mg kg^{? 1}) after 15–20 d. Residues dissipated with a half-life of 3.0–3.8 d from both first and second-year application. A 3 d waiting period for harvest of fruits after insecticide application and processing resulted in the residue levels that were below the Codex maximum residue limit (MRL) of 0.5 mg kg^{? 1} thereby achieving a maximum safety and minimum risk to consumers. The best combination of chemicals for decontamination of indoxacarb was found to be by washing with a mixture of alkali and potassium permanganate (KMnO₄) thereby resulting in the removal of 67.5% and 59.2 % residues for 5 and 10 μ g g^{? 1} spiking doses, respectively. Major products formed on reaction of indoxacarb with alkali were identified by electron spray ionization chromatography/mass spectrometry (ESI/MS). The per cent reduction on the weight and number basis of treated eggplant plots were compared to those observed in control plots to demonstrate the effectiveness of indoxacarb treatment on shoot and fruit borer population.     

Rethinking the assessment of photochemical modelin systems in air quality planning applications

The U.S. Environmental Protection Agency provides guidelines for demonstrating that future 8-hr ozone (O3) design values will be at or below the National Ambient Air Quality Standards on the basis of the application of photochemical modeling systems to simulate the effect of emission reductions. These guidelines also require assessment of the model simulation against observations. In this study, we examined the link between the simulated relative responses to emission reductions and model performance as measured by operational evaluation metrics, a part of the model evaluation required by the guidance, which often is the cornerstone of model evaluation in many practical applications. To this end, summertime O3 concentrations were simulated with two modeling systems for both 2002 and 2009 emission conditions. One of these two modeling systems was applied with two different parameterizations for vertical mixing. Comparison of the simulated base-case 8-hr daily maximum O3 concentrations showed marked model-to-model differences of up to 20 ppb, resulting in significant differences in operational model performance measures. In contrast, only relatively minor differences were detected in the relative response of O3 concentrations to emission reductions, resulting in differences of a few ppb or less in estimated future year design values. These findings imply that operational model evaluation metrics provide little insight into the reliability of the actual model application in the regulatory setting (i.e., the estimation of relative changes). In agreement with the guidance, it is argued that more emphasis should be placed on the diagnostic evaluation of O3-precursor relationships and on the development and application of dynamic and retrospective evaluation approaches in which the response of the model to changes in meteorology and emissions is compared with observed changes. As an example, simulated relative O3 changes between 1995 and 2007 are compared against observed changes. It is suggested that such retrospective studies can serve as the starting point for targeted diagnostic studies in which individual aspects of the modeling system are evaluated and refined to improve the characterization of observed changes.     

The pathway of dechlorination of PCB congener by a photochemical chain process in 2-propanol: the role of medium and quenching

As part of a program aimed at developing a field process for cleanup of PCB contaminated soils using photochemistry in basic 2-propanol, additional details of the dechlorination pathway are presented. The mechanism involves a chain reaction with both homolytic photochemical C-Cl bond fission and electron transfer steps producing PCB anion radicals. Kinetics of dechlorination of various congeners show patterns of relative rates associated with the basic 2-propanol medium that are not found in other media because both electron transfer and photochemical homolysis steps determine overall rates of dechlorination and govern the pathways and relative concentrations of intermediates. The electron transfer steps display opposite structure-reactivity correlations to the photo-homolysis, C-Cl bond fission steps. Oxygen quenching is shown to differentially affect both types of steps. In contrast to the suggestion that inter system crossing can be highly efficient with reaction originating from a PCB triplet, oxygen quenching data suggest that a significant minimum of the quantum yield is non-quenchable, presumably because of a reaction path from the PCB singlet. This may help to explain why exclusion of air is not entirely necessary in practice.     

<Emphasis Type="Bold">Tracing lead contamination in foods in the city of Kolkata,India</Emphasis>

Lead isotopic ratios (LIR) of eight common food items, street dust, coal, diesel, sediments, lead ore and rainwater from India have been reported for the first time in this paper. This study characterized the source and extent of lead pollution in the different foodstuff consumed in Kolkata, a major metropolis of eastern India. The atmospheric lead input to the food items, sold openly in busy roadside markets of the city, has been quantified. The mean 207/206 and 208/206 LIRs of the eight food items ranged from 0.8847 to 0.8924 and 2.145 to 2.167, respectively. Diesel had the highest mean 207/206 and 208/206 values of 0.9015 and 2.1869, respectively, apart from the lead ore. The food items had a mean lead concentration between 3.78 and 43.35 mg kg^?1. The two ratio scatter plots of all the different environmental matrices were spread linearly between the uncontaminated Ichapur sediment and diesel. The 207/206 LIRs of the coal with a mean of 0.8777 did not fall in the linear trend, while the street dust and food samples overlapped strongly. The rainwater sample had a 207/206 LIR of 0.9007. Contaminated sediments in Dhapa, the repository of the city’s municipal garbage, had a mean 207/206 LIR of 0.8658. The corresponding value obtained from the sewage-fed vegetable grown there was 0.8058. The present study indicated that diesel was one of the main contributor to Pb pollution. The atmospheric lead contribution to the food items was in the range of 68.48–86.66 %.     

Physicochemical and thermal characterization of nonedible oilseed residual waste as sustainable solid biofuel

The present study aims to investigate the potential of nonedible oilseed Jatropha (Jatropha curcas) and Karanja (Pongamia pinnata) defatted residual biomasses (whole seed, kernel, and hull), as solid biofuel. These biomasses showed good carbon contents (39.8–44.5%), whereas, fewer amounts were observed for sulfur (0.15–0.90%), chlorine (0.64–1.76%), nitrogen (0.9–7.2%) and ash contents (4.0–8.7%). Their volatile matter (60.23–81.6%) and calorific values (17.68–19.98 MJ/kg) were found to be comparable to coal. FT-IR and chemical analyses supported the presence of good amount of cellulose, hemicellulose and lower lignin. The pellets prepared without any additional binder, showed better compaction ratio, bulk density and compressive strength. XRF analysis carried out for determination of slagging–fouling indices, suggested their ash deposition tendencies in boilers, which can be overcome significantly with the optimization of the blower operations and control of ash depositions. Thus, overall various chemical, physical properties, thermal decomposition, surface morphological studies and their high biofuel reactivity indicated that residual biomasses of Jatropha and Karanja seeds have high potential to be utilized as a solid biofuel.     

Environmental variables and fisheries diversity of the Naaf River Estuary,Bangladesh

The Naaf River estuary is one of the large estuaries in the Bangladesh coastal region not to have been affected by extensive human disturbance. This research provides information about the fisheries diversity status by Estuarine Set Bag Net (ESBN) sampling relation to physicochemical variables in both spatio-temporal scales. About 25 km of the lower estuary was divided into six zones for sample collection by considering the accessibility and availability of the ESBN operation, fish landing centers and location of the fishing villages. In total 48 samples have been analyzed which were taken throughout March to October 2006. To quantify the species diversity, all fisheries data were analyzed by using EstimateS and EcoSim software which accounts the different diversity indices viz., species richness, Shannon–Wiener diversity Index, Dominance and Evenness index. The research results demonstrate that the Naaf River estuary is a habitat of 161 (species richness, Sobs = 161, Choa 1 = 162 ± 2.34, ACE = 161.73) different species which belong to 98 fin fishes, 23 shrimps and prawns, 13 crabs, 11 molluscs, 3 echinoderms, 4 other crustaceans; while 9 remain unidentified. Results on the aquatic environment, mainly salinity and turbidity were found to have a major influence on their occurrence and distribution. All the findings indicated that the Naaf River estuary is a highly productive system and provides a favourable environment for large variety of estuarine species assemblages.     

Recyclable Clay-Supported Heteropolyacid Catalysts for Complete Glycolysis and Aminolysis of Post-consumer PET Beverage Bottles

Journal of Polymers and the Environment - In this investigation, the use of phosphotungstic acid (PWA) and phosphomolybdic acid (PMA) as well as Zn2+ containing kaolin and bentonite explored for...     

Status and management of watersheds in the Upper Pokhara Valley,Nepal

Contributing to the debate on the causes of Himalayan environmental degradation, the status and management of four watersheds in the Upper Pokhara Valley were studied using information available from land use analysis, household surveys conducted in 1989 and 1992, deliberations held with villagers, and field observations. Accordingly, areas under forests and grazing lands were found being depleted at relatively high rates between 1957 and 1978 due mainly to the government policy of increasing national revenue by expansion of agricultural lands, nationalization of forests, steadily growing population, and dwindling household economy. Despite the steady growth of population, this process had remarkably slackened since 1978, owing primarily to remaining forests being located in very, steep slopes and implementation of the community forestry program. Forests with relatively sparase tree density, however, and grazing lands in the vicinity of settlements have been undergoing degradation due to fuelwood and fodder collection and livestock grazing. In many instances, this is aggravated by weak resource management institutions. Being particularly aware of the economic implication of land degradation, farmers have adopted assorted land management practices. Still a substantial proportion ofbari lands in the hill slopes is vulnerable to accelerating degradation, as the arable cropping system is being practiced there as well. The perpetuation of the local subsistence economy is certain to lead, to a further deterioration of the socioeconomic and environmental conditions of watersheds. To facilitate environmental conservation and ecorestructuring for sustainable development, a broad watershed management strategy is outlined with focus on alleviating pressure on natural resources.     

A Comprehensive Numerical Model Simulating Gas,Heat, and Moisture Transport in Sanitary Landfills and Methane Oxidation in Final Covers

A model to simulate gas, heat, and moisture transport through a sanitary landfill has been developed. The model not only considers the different processes that go on in a landfill but also the oxidation of methane in the final cover. The model was calibrated using published results and field data from a pilot scale landfill in Calgary. The model captures the physics of the different processes quite well. Simulations from the model show that waste permeability had a significant impact on the temperature, pressure distribution, and flux from a landfill. The presence of the final and intermediate covers enhanced the gas storage capacity of the landfill. Biodegradation of the waste was enhanced as the final cover minimized the atmospheric influences. In addition, the composition of landfill gas emitted to the atmosphere was significantly different from the composition of gas generated in landfill due to the presence of covers as some of the methane is oxidized to carbon dioxide. There was no significant benefit of using a final cover of higher depth. The presence and number of intermediate covers had an impact on gas flux and temperature distribution within a landfill.