Gaining forests but losing ground: A GIS evaluation in a Himalayan watershed

GIS overlay techniques were used to provide a quantitative historic documentation of deforestation and land-use dynamics in the Middle Mountains of Nepal between 1947 and 1990. Deforestation was most critical in the 1960s, but active afforestation programs in the 1980s have reversed the process. In spite of these trends, the degradation problem is more complex. The GIS evaluation showed that 86% of the recently afforested land is now under pine plantations located primarily at lower elevations and moderately steep slopes. In contrast, rainfed agricultural expansion is most pronounced on acidic soils and steeper, upper elevation sites, suggesting marginalization of agriculture. Agricultural expansion coupled with major losses of grazing land to pine forests are the key processes pointing towards major animal feed deficits. An alternative animal feed source is suggested through GIS using a topographically based microclimatic classification to generate a tree-planting map where the optimum ecological conditions for selective native fodder tree species are identified.     

Effects of sheep and goat grazing on the species diversity in the alpine meadows of Western Himalaya

This paper deals with effects of sheep and goat grazing on plant species diversity, species richness and species composition in two important conservation areas of the Western Himalaya; the Valley of Flowers (VOF) National Park and the Great Himalayan National Park (GHNP). The VOF is a completely Protected Area as it is devoid of livestock grazing whereas, 20,000 sheep and goats annually graze in GHNP. Both the National Parks possess sub-alpine and alpine vegetation that is distributed in 13 major habitat types. Present investigations indicate that all the habitat types in VOF are higher in plant species diversity and richness compared to habitat types in GHNP. Similarly, all three eco-climatic zones in VOF are higher in species diversity and richness compared to GHNP. Species diversity also decreases with increasing altitude in both the National Parks. The findings of this study are discussed in the light of the management and conservation of alpine meadows of the Western Himalayas.     

Biosorption of arsenic from aqueous solution using dye waste

The purpose of this study is to examine on removal of arsenic from water by biosorption through potential application of herbal dye wastes. Four different flower dye residues (after extraction of natural dye) viz. Hibiscus rosasinensis, Rosa rosa, Tagetes erecta, and Canna indica were utilized successfully for the removal of arsenic from aqueous solution. Batch studies were carried out for various parameters viz. pH, sorbent dose, contact time, initial metal ion concentration, and temperature. Data were utilized for isothermal, kinetic, and thermodynamic studies. Scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDAX), and Fourier transform infrared (FTIR) analyses of biomass were performed. The results showed that 1 g/100 ml for 5.0–5.5 h contact time at pH 6.0–7.5 with agitation rate 150 rpm provided 98, 96, 92, and 85 % maximum absorption of arsenic by R. rosa, H. rosasinensis, T. erecta, and C. indica, respectively, at initial concentration of 500 ppb. Data followed Langmuir isotherm showing sorption to be monolayer on heterogeneous surface of biosorbent. Negative values of ΔG° indicated spontaneous nature, whereas ΔH° indicates exothermic nature of system followed by pseudo-first-order adsorption kinetics. FTIR results showed apparent changes in functional group regions after metal chelation. SEM and EDAX analyses showed the changes in surface morphology of all test biosorbents. Herbal dye wastes, used as biosorbent, exhibited significant (85–98 %) removal of arsenic from aqueous solution. Hence, these biosorbents are cost-effective, easily available, eco-friendly, and comparatively more effective than other biosorbents already in use. These may be used to remove arsenic and other toxic metals from water.     

An assessment of the sensitivity and reliability of the relative reduction factor approach in the development of 8-hr ozone attainment plans

The updated regulatory framework for demonstrating that future 8-hr ozone (O3) design values will be at or below the National Ambient Air Quality Standards (NAAQS) provides guidelines for the development of a State Implementation Plan (SIP) that includes methods based on photochemical modeling and analytical techniques. One of the suggested approaches is the relative reduction factor (RRF) for estimating the efficacy of emission reductions. In this study, the sensitivity of model-predicted responses towards emission reductions to the choice of meteorology and chemical mechanisms was examined. While the different modeling simulations generally were found to be in agreement on whether predicted future-year design values would be above or below the NAAQS for 8-hr O3 at a majority of the monitoring locations in the eastern United States, differences existed for a small percentage of monitors (approximately 6.4%). Another issue investigated was the ability of the attainment demonstration procedure to predict changes in monitored O3 design values. A retrospective analysis was performed by comparing predicted O3 design values from model simulations using emission estimates for 1996 and 2001 with monitored O3 design values for 2001. Results indicated that an average gross error of approximately 5 ppb was present between modeled and observed design values and that, at approximately 27% of all sites, model-predicted and observed design values disagreed as to whether the design value was above or below the NAAQS. Retrospective analyses such as the one presented in this study can provide valuable insights into the strengths and limitations of modeling and analysis techniques used to predict future design values over time periods of a decade or more for the purpose of developing SIPs. Furthermore, such analyses could provide avenues for improvement and added confidence in the use of the RRF approach for addressing attainment of the NAAQS.     

Evaluation of the presence-absence (P-A) test: A simplified bacteriological test for detecting coliforms in rural drinking water of India

One thousand three-hundred and ninety-four drinking water sources comprising ground water, surface water and piped supplies were tested in order to compare the presence-absence (P-A) test with standard MPN method to detect coliforms as indicators of water quality. Out of 1394 samples, 1074 (77.04%) and 1030 (74.88%) were positive by the MPN and P-A test, respectively. The P-A test detected 96% of the positives detected by the MPN test. The P-A test may be effectively used as a rapid screening method to detect coliform contamination in less polluted sources such as ground water and piped supplies.     

Heavy Metal Uptake By Scirpus Littoralis Schrad. From Fly Ash Dosed and Metal Spiked Soils

Scirpus littoralis is a wetland plant commonly found in Yamuna flood plains of Delhi, India. The ability of Scirpus littoralis to take up and translocate five metals- Mn, Ni, Cu, Zn and Pb from fly ash dosed and metal spiked soils were studied under waterlogged and field conditions for 90 days. Scirpus littoralis accumulated Mn, Ni, Cu, Zn and Pb upto a maximum of 494.92, 56.37, 144.98, 207.95 and 93.08 ppm dry wt., respectively in below ground organs (BO) in 90 days time. The metal content ratios BO/soil (B/S) were higher than shoot/soil ratios (T/S) for all the metals, the highest being for Ni. Metal ratios BO/water (B/W) were also higher than shoot/water (T/W) ratios but the B/W ratio was maximum for Zn. The changes in nutrient status (N, P) in soil water and plants were also studied at interval of 30 days. The Pearson's correlation between metal uptake and N, P uptake were calculated. All the metals except Ni showed negative correlation with nitrogen but they were all non-significant. However, P uptake showed positive correlations with all the metals and all were significant at 1% confidence limit.     

Quality of water obtained by tapping shallow seepages in the Almota Hills,India

We studied the quality of water obtained using a new method of tapping underground water seepages by digging shallow water collection chambers in the Almora Hills of the state of Uttar Pradesh, India; quality of this water was compared with that of water obtained using traditional water sources in this region, namely naulas (surface seepages) and springs.Water from both the new and the traditional water sources had an excess of chromium and, in some samples, of iron and lead. Microbiological analysis showed that water from new water sources was safer than that obtained from tradional sources; however, only 40% of the shallow seepages provided water conforming to WHO standards on water quality.We conclude that tapping of underground water seepages may be a useful method of providing potable water to populations living in the hills. However, further improvement is necessary in the maintenance of the clean catchment area and in disposal of waste water from these water sources to ensure water quality.     

A Receptor Climatology of Trajectories Originating in New York State

Air parcel trajectories originating from three locations in New York State are calculated for a three year period using the ARL-ATAD long-range transport model. Model output consisting of a trajectory segment's end point longitude and latitude position are analyzed to describe the long-range transport climatology by computing the frequency of occurrence of segment end points terminating over 33 receptor areas comprising east-central North America and a portion of the Atlantic Ocean. Results of the frequency of occurrence data show how often air pollutants emitted at or near the origin may be expected to drift over a specific downwind region. For the New York City airshed, it was found that 26.2% of the trajectories remain over New York State for transport times of 3 h and the frequency decreases to 5.2% after 24 h of transport. Approximately 40% of all trajectories are found to be over the Atlantic Ocean after 3 h of transport. When allowances are made for losses of data over the Atlantic Ocean, up to 64% of all trajectories are over the Atlantic Ocean after 24 h of transport. This frequency of trajectories over the Atlantic Ocean was found to be in agreement with wet and dry deposition modeling results conducted for power plants in New York City.     

Metallic and non-metallic nanoparticles from plant,animal, and fisheries wastes: potential and valorization for application in agriculture

Environmental Science and Pollution Research - Global agriculture is facing tremendous challenges due to climate change. The most predominant amongst these challenges are abiotic and biotic...