Toxicity of aqueous mixture of phenol and chlorophenols upon photosensitized oxidation initiated by sunlight or vis-lamp

It is well established that aquatic wildlife in marine and freshwater of the European Union is exposed to natural and synthetic endocrine disruptor compounds (EDCs) which are able to interfere with the hormonal system causing adverse effects on the intact physiology of organisms. The traditional wastewater treatment processes are inefficient on the removal of EDCs in low concentration. Moreover, not only the efficiency of treatment must be considered but also toxicological aspects. Taking into account all these aspects, the main goal of the study was to investigate the photochemical decomposition of hazardous phenolic compounds under simulated as well as natural sunlight from the toxicity point of view. The studies were focused on photodegradation of 2,4-dichlorophenol as well as mixture of phenol, 2-chlorophenol and 2,4-dichlorophenol. Photosensitized oxidation process was carried out in homogeneous and heterogeneous system. V. fischeri luminescence inhibition was used to determine the changes of toxicity in mixture during simulated and natural irradiation. The photodegradation was carried out in three kinds of water matrix; moreover, the influence of presence of inorganic matter on the treatment process was investigated. The experiments with natural sunlight proved applicability of photosensitive chitosan for visible-light water pollutant degradation. The results of toxicity investigation show that using photosensitive chitosan for visible-light, the toxicity of reaction mixture towards V. fischeri has significantly decreased. The EC₅₀ was found to increase over the irradiation time; this increase was not proportional to the transformation of the parent compounds.     

Mercury in wild mushrooms and underlying soil substrate from Koszalin, North-central Poland

Concentrations of total mercury were determined by cold-vapour atomic absorption spectroscopy (CV-AAS) in 221 caps and 221 stalks of 15 species of wild growing higher fungi/mushrooms and 221 samples of corresponding soil substrate collected in 1997-98 in Manowo County, near the city of Koszalin in North-central Poland. Mean mercury concentrations in caps and stalks of the mushroom species examined and soils varied between 30+/-31 and 920+/-280, 17+/-11 and 560+/-220, and 10+/-9 and 170+/-110 ng/g dry matter, respectively. Cap to stalk mercury concentration quotients were from 1.0+/-0.4 in poison pax (Paxillus involutus) to 2.8+/-0.7 in slippery jack (Suillus luteus). Brown cort (Cortinarius malicorius), fly agaric (Amanita muscaria), orange-brown ringless amanita (A. fulva), red-aspen bolete (Leccinum rufum) and mutagen milk cap (Lactarius necator) contained the highest concentrations of mercury both in caps and stalks, and mean concentrations varied between 600+/-750 and 920+/-280 and 370+/-470 and 560+/-220 ng/g dry matter, respectively. An estimate of daily intake of mercury from mushroom consumption indicated that the flesh of edible species of mushrooms may not pose hazards to human health even at a maximum consumption rate of 28 g/day. However, it should be noted that mercury intake from other foods will augment the daily intake rates. Species such as the sickener (Russula emetica), Geranium-scented russula (R. fellea) and poison pax (P. involutus) did not concentrate mercury as evidenced from the bioconcentration factors (BCFs: concentrations in mushroom/concentration in soil substrate), which were less than 1. Similarly, red-hot milk cap (L. rufus), rickstone funnel cap (Clitocybe geotropa) and European cow bolete (S. bovinus) were observed to be weak accumulators of mercury. Fly agaric (A. muscaria) accumulated great concentrations of mercury with BCFs reaching 73+/-42 and 38+/-22 in caps and stalks, respectively. Mercury BCFs of between 4.0+/-2.3 and 23+/-25 (caps) and 2.6+/-1.9 and 14+/-12 (stalks) were noted for the other mushroom species. Relatively great concentrations of mercury in fly agaric (A. muscaria) were due to preferential uptake of this element by this species.     

V-doped TiO2 photocatalysts and their application to pollutant degradation

Environmental Science and Pollution Research - V-doped TiO2 materials (0.01, 0.05, 0.10, and 1.00 nominal atomic %) were synthesized by the sol-gel method and characterized by X-ray diffraction,...     

Genotoxic potential of diesel exhaust particles from the combustion of first- and second-generation biodiesel fuels—the FuelHealth project

Epidemiological data indicate that exposure to diesel exhaust particles (DEPs) from traffic emissions is associated with higher risk of morbidity and mortality related to cardiovascular and pulmonary diseases, accelerated progression of atherosclerotic plaques, and possible lung cancer. While the impact of DEPs from combustion of fossil diesel fuel on human health has been extensively studied, current knowledge of DEPs from combustion of biofuels provides limited and inconsistent information about its mutagenicity and genotoxicity, as well as possible adverse health risks. The objective of the present work was to compare the genotoxicity of DEPs from combustion of two first-generation fuels, 7% fatty acid methyl esters (FAME) (B7) and 20% FAME (B20), and a second-generation 20% FAME/hydrotreated vegetable oil (SHB: synthetic hydrocarbon biofuel) fuel. Our results revealed that particulate engine emissions from each type of biodiesel fuel induced genotoxic effects in BEAS-2B and A549 cells, manifested as the increased levels of single-strand breaks, the increased frequencies of micronuclei, or the deregulated expression of genes involved in DNA damage signaling pathways. We also found that none of the tested DEPs showed the induction of oxidative DNA damage and the gamma-H2AX-detectable double-strand breaks. The most pronounced differences concerning the tested particles were observed for the induction of single-strand breaks, with the greatest genotoxicity being associated with the B7-derived DEPs. The differences in other effects between DEPs from the different biodiesel blend percentage and biodiesel feedstock were also observed, but the magnitude of these variations was limited.     

Kinetics of <Superscript>210</Superscript>Po accumulation in moss body profiles

Radionuclide concentration analysis of total moss bodies often gave relatively different results than a separate analysis of each different morphological part of the same sample. The dynamics of the transfer of metals by dust uplifted from the soil and another approach, based on the diffusion of the two radionuclides to the moss, have been analyzed. In the proposed model, short- and long-term approaches have been applied. Each part of a moss’s profile can show different radionuclides accumulation ability, including both ²¹⁰Pb and ²¹⁰Po isotopes. A first-order kinetic model has been used for ²¹⁰Po and ²¹⁰Pb transport between three body components of mosses. This mathematical approach has been applied for ²¹⁰Po activity concentration in the air estimation. For relatively clean deep forest region, calculated concentrations were from 17.2 to 43.8 μBqm^?3, while for urban air concentrations were higher from 49.1 to 104.9 μBqm^?3.     

Nitrogen removal from wastewater and bacterial diversity in activated sludge at different COD/N ratios and dissolved oxygen concentrations

The impact of the organic carbon to nitrogen ratio (chemical oxygen demand (COD)/N) in wastewater and dissolved oxygen (DO) concentration on carbon and nitrogen removal efficiency, and total bacteria and ammonia-oxidizing bacteria (AOB) communities in activated sludge in constantly aerated sequencing batch reactors (SBRs) was determined. At DO of 0.5 and 1.5 mg O₂/L during the aeration phase, the efficiency of ammonia oxidation exceeded 90%, with nitrates as the main product. Nitrification and denitrification achieved under the same operating conditions suggested the simultaneous course of these processes. The most effective nitrogen elimination (above 50%) was obtained at the COD/N ratio of 6.8 and DO of 0.5 mg O₂/L. Total bacterial diversity was similar in all experimental series, however, for both COD/N ratios of 6.8 and 0.7, higher values were observed at DO of 0.5 mg O₂/L. The diversity and abundance of AOB were higher in the reactors with the COD/N ratio of 0.7 in comparison with the reactors with the COD/N of 6.8. For both COD/N ratios applied, the AOB population was not affected by oxygen concentration. Amplicons with sequences indicating membership of the genus Nitrosospira were the determinants of variable technological conditions.     

Adsorption of arsenic (V) by iron (III)-modified natural zeolitic tuff

Adsorption of arsenic (V) by natural zeolitic tuff, modified with iron (III), was investigated. Also, the iron (III) adsorption characteristics by natural zeolitic tuff was evaluated. It was determined that iron (III) adsorption by starting zeolitic tuff was best represented by the Freundlich type of isotherm, having correlation coefficient (r ²) of 0.990. Arsenic (V) adsorption by iron (III)-modified zeolitic tuff followed a nonlinear type of isotherm. The best fit of the experimental data was obtained using the Langmuir–Freundlich model (r ² = 0.99), with the estimated maximum of arsenic (V) adsorption to iron (III)-modified zeolitic tuff of 1.55 mg/g.     

The Relationship Between Psychosocial Work Factors,Work Stress and Computer-Related Musculoskeletal Discomforts Among Computer Users in Malaysia

We analyzed occupational exposure to potentially infectious body fluids among health care workers (HCWs). Nurses were the most common exposed category of HCWs. In 73.6% cases needle sticks had been the reason of exposure. Recapping a needle was the cause of exposure in 6.9% accidents. Among 189 registered HCWs, 66 (34.9%) performed invasive procedures without any personal protective equipment. Prophylaxis with antiretroviral drugs was necessary in 43 (22.8%) cases.

As many as 60.3% of exposure incidents to potentially infectious material result from non-compliance with the relevant recommendations. Continuous education and training is critically needed to prevent occupational exposure to blood-borne infections among health care workers.     

The transfer of active ingredients of insecticides and fungicides from an orchard to beehives

This investigation was undertaken to determine whether active ingredients (AIs) of currently recommended plant protection products (PPPs) could be transferred to beehives from apple and pear trees. A field trial was carried out with apple trees of Ligol and Idared variety, and pear trees of Conference variety. For pest and diseases control of fungal origin, recommended PPPs were applied. Samples of flowers from the above-mentioned varieties of fruit trees, of bees, brood and honey from beehives located in their direct neighborhood were collected regularly and analyzed for the presence of lambda-cyhalothrin (an insecticide) and cyprodinil, captan, fluopyram, kresoxim-methyl, penthiopyrad and trifloxystrobin (fungicides). In samples of flowers of Ligol variety, fluopyram residues (on average 0.621 µg single flower^?1) were at the highest levels, whereas in samples of pear flowers of Conference variety, and in flowers of Idared variety, captan residues (on average, respectively, 0.705 and 165.7 µg single flower^?1). In samples of bees and honey, residues of five AIs were detected, and in brood six AIs, whereby in each case captan residues prevailed, respectively, up to 585.2, 51.52 and 126.5 µg kg^?1 bees and honey. In the honey, significantly larger residues of captan were found out than maximum residue level (MRL) for this AI – 103.04% MRL. In the case of any AI, the daily intake did not exceed 0.002% acceptable daily intake (ADI).