Measurement of total antimony and antimony species in mine contaminated soils by ICPMS and HPLC-ICPMS

This paper describes the measurement of total antimony and antimony species in "real world" mine contaminated sediments using ICPMS and HPLC-ICPMS. Low and high temperature microwave extraction procedures (90 degrees C and 150 degrees C, respectively) using a range of nitric-hydrochloric acid combinations were examined as to their efficacy to extract antimony from six mine contaminated soils and a certified reference material. The use of the higher temperature with nitric-hydrochloric acid (1:2 (v/v)) was suitable to release antimony from sediments and the certified reference material, NIST 2710 Montana soil. Antimony concentrations obtained using this acid mixture were similar to those obtained using a more aggressive extraction with nitric, hydrochloric, perchloric and hydrofluoric acid mixture. A 25 mM citric acid solution at 90 degrees C for 15 min extracted 47-78% of antimony from soils. A Hamilton PRP X-100 anion exchange column with 20 mM EDTA mobile phase, pH 4.5, flow rate 1.5 mL min(-1) and column temperature of 50 degrees C was used to separate antimony species. Column recoveries ranged from 78-104%. The predominant form of antimony was Sb(5+). Little conversion of Sb(5+) occurred (<5%) during extraction, however, significant conversion of Sb(3+) occurred (approximately 36%). The extraction of antimony species with citric acid should be useful in the determination of inorganic antimony available to plants, as plants commonly excrete carboxylic acids, including citric acid, into their rhizospheres to mobilise trace elements for nutritional purposes.     

Start-up performance of a full-scale bioreactor landfill cell under cold-climate conditions

A 0.49-ha bioreactor landfill cell containing approximately 32,400 metric tons of municipal solid waste was constructed and operated at the Northern Oaks Recycling and Disposal Facility in Harrison, Michigan, USA. Design of this full-scale research cell included a network of 48 temperature and moisture sensors, leachate collection basins, and gas sampling ports, which provided for continuous temperature and moisture data and periodic measurements of both the quantity and composition of the leachate and gas produced. The data indicated that methane generation started approximately 3 months after filling in lifts that were placed during summer, but not until 8 months for those filled during the winter. Temperature data indicated that near-0 degrees C temperatures persisted within the lifts filled during winter for more than 6 months, and that gas production was minimal during this period. These results suggest that in addition to maintaining optimal moisture levels within the waste mass, temperature control must be a key design consideration in cold climates.     

Preparation and Characterization of PVDF/g-C3N4/Chitosan Polymeric Membrane for the Removal of Direct Blue 14 Dye

Journal of Polymers and the Environment - Polyvinylidene fluoride (PVDF)/g-C3N4/Chitosan thin film membranes were prepared by immersing of PVDF/g-C3N4 membrane in solution containing various...     

The crucial role of the accessible area in ecological niche modeling and species distribution modeling

Using known occurrences of species and correlational modeling approaches has become a common paradigm in broad-scale ecology and biogeography, yet important aspects of the methodology remain little-explored in terms of conceptual basis. Here, we explore the conceptual and empirical reasons behind choice of extent of study area in such analyses, and offer practical, but conceptually justified, reasoning for such decisions. We assert that the area that has been accessible to the species of interest over relevant time periods represents the ideal area for model development, testing, and comparison.     

Double catastrophe: intermittent stratospheric geoengineering induced by societal collapse

Perceived failure to reduce greenhouse gas emissions has prompted interest in avoiding the harms of climate change via geoengineering, that is, the intentional manipulation of Earth system processes. Perhaps the most promising geoengineering technique is stratospheric aerosol injection (SAI), which reflects incoming solar radiation, thereby lowering surface temperatures. This paper analyzes a scenario in which SAI brings great harm on its own. The scenario is based on the issue of SAI intermittency, in which aerosol injection is halted, sending temperatures rapidly back toward where they would have been without SAI. The rapid temperature increase could be quite damaging, which in turn creates a strong incentive to avoid intermittency. In the scenario, a catastrophic societal collapse eliminates society’s ability to continue SAI, despite the incentive. The collapse could be caused by a pandemic, nuclear war, or other global catastrophe. The ensuing intermittency hits a population that is already vulnerable from the initial collapse, making for a double catastrophe. While the outcomes of the double catastrophe are difficult to predict, plausible worst-case scenarios include human extinction. The decision to implement SAI is found to depend on whether global catastrophe is more likely from double catastrophe or from climate change alone. The SAI double catastrophe scenario also strengthens arguments for greenhouse gas emissions reductions and against SAI, as well as for building communities that could be self-sufficient during global catastrophes. Finally, the paper demonstrates the value of integrative, systems-based global catastrophic risk analysis.     

Effect of Changing VOC Influent Composition on the Microbial Community Structure of TBABs

Microbial communities in trickle bed air biofilters (TBABs) were evaluated under conditions of interchanging the feed volatile organic compounds (VOCs) and VOC mixtures. Three independent TBABs (Biofilter “A,” “B,” and “C”) were run under interchanging VOCs conditions with different initial VOCs. Two aromatic compounds (toluene and styrene) and two oxygenated compounds (methyl ethyl ketone (MEK) and methyl isobutyl ketone (MIBK)) were interchanged as single solutes. Two other TBABs “D” and “E” were run for two VOC mixtures. Biofilter “D” had a VOC mixture with equal molar ratio of the four components and Biofilter “E” received a VOC mixture with its composition based on EPA 2003 emission report. Denaturing gradient gel electrophoresis (DGGE) analysis of 16S rRNA genes was used to assess the microbial richness in TBABs for treating the VOC mixtures and the impact of interchanging VOCs on the bacterial community structure in the biofilters. The results from DGGE indicated that the microbial community structure in the biofilter was different after each interchange of VOCs. Some bands of microbial species faded and some bands were strengthened. For the two TBABs treating VOC mixtures, the microbial species did not show significant difference, but the richness among these species was different from each other.     

Observations on the measurement of total antimony and antimony species in algae, plant and animal tissues

This paper describes our experiences with undertaking measurements of total antimony and antimony speciation in algae, plant and animal tissues. Digestion with nitric acid alone is suitable to release antimony from animal tissues. When organisms have high silica contents, e.g. some plants and algae, the addition of tetrafluorboric acid is required to dissolve silica as some antimony is retained by silica in extracts. Antimony in digested extracts is present as Sb5+ and hydride generation procedures can be used to determine total antimony concentrations, as total antimony in extracts will not be under estimated. Relatively non-aggressive solvents such as water, dilute nitric acid, sodium hydroxide and enzymes remove highly variable amounts of antimony (2-84%) from algae, plant and animal tissues. Addition of Sb3+ and Sb5+ to NIST CRM 1572 Citrus Leaves, pre- and post-extraction with water showed that Sb3+ is oxidised to Sb5+ while Sb5+ is redistributed amongst binding sites giving rise to artefacts. DOLT-2 and algae extracts indicated the presence of only inorganic antimony. A moss sample had inorganic antimony and a number of unknown antimony species in extracts. Future studies should explore the nature of the binding of antimony in tissues as solvents commonly used to extract metals and metalloids from algae, plant and animal tissues are not appropriate.     

Adsorption and thermodynamic parameters of chlorantraniliprole and dinotefuran on clay loam soil with difference in particle size and pH

The behavior of chlorantraniliprole (CAP) and dinotefuran (DNF) insecticides was investigated in clay loam soil, a common type of the Egyptian soil. Effect of temperature, pH and particle size of the soil on the adsorption process was studied. Adsorption isotherm by bulk soil and its constituents; humic acid (HA), clay, silt and sand fractions was measured using batch equilibration technique. The results showed that the adsorption of the insecticides tested was significantly affected by the temperature and was a spontaneous interfacial process in the soil. Freundlich model accurately predicted the adsorption behavior of both insecticides. The interaction between soil and insecticides was endothermic and the highest adsorption for CAP and DNF was obtained at pH 9. However, the effect of pH on the adsorption of DNF was lower than that of CAP. Sorption of CAP and DNF on HA fraction was significantly greater than on clay fraction and bulk soil. In addition, the adsorption was significantly increased with particle size decrease. It could be inferred that the adsorption of CAP and DNF on clay loam soil was physical in nature and greatly influenced by the soil components, pH and temperature.     

Rates of particulate pollution deposition onto leaf surfaces: Temporal and inter-species magnetic analyses

Evaluation of health impacts arising from inhalation of pollutant particles <10 μm (PM₁₀) is an active research area. However, lack of exposure data at high spatial resolution impedes identification of causal associations between exposure and illness. Biomagnetic monitoring of PM₁₀ deposited on tree leaves may provide a means of obtaining exposure data at high spatial resolution. To calculate ambient PM₁₀ concentrations from leaf magnetic values, the relationship between the magnetic signal and total PM₁₀ mass must be quantified, and the exposure time (via magnetic deposition velocity (MV_d) calculations) known. Birches display higher MV_d (∼5 cm⁻¹) than lime trees (∼2 cm⁻¹). Leaf saturation remanence values reached ‘equilibrium’ with ambient PM₁₀ concentrations after ∼6 ‘dry’ days (<3 mm/day rainfall). Other co-located species displayed within-species consistency in MV_d; robust inter-calibration can thus be achieved, enabling magnetic PM₁₀ biomonitoring at unprecedented spatial resolution.