Captopril and its dimer captopril disulfide: photodegradation, aerobic biodegradation and identification of transformation products by HPLC-UV and LC-ion trap-MS(n)

In some countries effluents from hospitals and households are directly emitted into open ditches without any further treatment and with very little dilution. Under such circumstances photo- and biodegradation in the environment can occur. However, these processes do not necessarily end up with the complete mineralization of a chemical. Therefore, the biodegradability of photoproduct(s) by environmental bacteria is of interest. Cardiovascular diseases are the number one cause of death globally. Captopril (CP) is used in this study as it is widely used in Egypt and stated as one of the essential drugs in Egypt for hypertension. Three tests from the OECD series were used for biodegradation testing: Closed Bottle test (CBT; OECD 301 D), Manometric Respirometry test (MRT; OECD 301 F) and the modified Zahn-Wellens test (ZWT; OECD 302 B). Photodegradation (150 W medium-pressure Hg-lamp) of CP was studied. Also CBT was performed for captopril disulfide (CPDS) and samples received after 64 min and 512 min of photolysis. The primary elimination of CP and CPDS was monitored by LC-UV at 210 nm and structures of photoproducts were assessed by LC-UV-MS/MS (ion trap). Analysis of photodegradation samples by LC-MS/MS revealed CP sulfonic acid as the major photodegradation product of CP. No biodegradation was observed for CP, CPDS and of the mixture resulting from photo-treatment after 64 min in CBT. Partial biodegradation in the CBT and MRT was observed in samples taken after 512 min photolysis and for CP itself in MRT. Complete biodegradation and mineralization of CP occurred in the ZWT.     

Preparation and Characterization of Biodegradable Blend Membranes of PBS/CA

Asymmetric membranes of cellulose acetate/poly (butylene succinate) were prepared using immersion precipitation technique. The blended membranes were characterized by contact angle, scanning electron microscopy, thermogravimetric analysis, degradation test in compost and dynamic test of raisin wastewater treatment. Results demonstrated that hydrophilicity of cellulose acetate was enhanced by addition of poly (butylene succinate) up to 50 %. Furthermore, polymeric composition affects cross sectional structure of the membranes by controlling formation of macrovoids. Addition of poly (butylene succinate) improved the membranes thermal stability and obviously their degradation in compost. The prepared membranes were able to reject the wastewater pollutants properly.     

Effect of Habitat Complexity on Richness, Abundance and Distributional Pattern of Forest Birds

Structurally complex forests provide more diverse conditions in comparison to homogenous forests because of greater variety of microhabitats and trees. This study assesses the association of bird species richness, abundance, and distributional pattern with habitat complexity (HC) in Kheyrud Forest in the north of Iran. Birds were surveyed during spring 2009 by 100 point counts. In each point count six habitat features related to the index of HC were computed and scored from 0 to 3. Then the scores were summed and divided into two groups of low and high complexity, HC ≤ 6 and HC > 6, respectively. To compare bird richness and abundance in different HCs, a two sample t-test was used. Presence and absence of bird species at each plot as a dependent variable were compared with the vegetation characteristics as an independent variable by means of the Canonical Correspondence Analysis. The results revealed bird species richness and abundance were significantly higher in more complex habitats. Bird species can be divided into two groups, the first group including species which associated with late successional stages and the second group, species belonging to early successional stages. Numbers of birds belonging to the first group declined in less complex forests, whereas the numbers of birds belonging to the second group increased. At the stand scale, our results reveal that bird abundance and richness are strongly associated with the complexity of vegetation structure in the study area.     

The effects of low frequency noise on mental performance and annoyance

Low frequency noise (LFN) as background noise in urban and work environments is emitted from many artificial sources such as road vehicles, aircraft, and air movement machinery including wind turbines, compressors, and ventilation or air conditioning units. In addition to objective effects, LFN could also cause noise annoyance and influence mental performance; however, there are no homogenous findings regarding this issue. The purpose of this research was to study the effects of LFN on mental performance and annoyance, as well as to consider the role of extraversion and neuroticism on the issue. This study was conducted on 90 students of Iran University of Medical Sciences (54 males and 36 females). The mean age of the students was 23.46 years (SD?=?1.97). Personality traits and noise annoyance were measured by using Eysenck Personality Inventory and a 12-scale self-reported questionnaire, respectively. Stroop and Cognitrone computerized tests measured mental performance of participants each exposed to 50 and 70 dBA of LFN and silence. LFNs were produced by Cool Edit Pro 2.1 software. There was no significant difference between mental performance parameters under 50 and 70 dBA of LFN, whereas there were significant differences between most mental performance parameters in quiet and under LFN (50 and 70 dBA). This research showed that LFN, compared to silence, increased the accuracy and the test performance speed (p?<?0.01). There was no association between LFN and noise annoyance (p?>?0.01). Introverts conducted the tests faster than extraverts (p?<?0.05). This research showed that neuroticism does not influence mental performance. It seems that LFN has increased arousal level of participants, and extraversion has a considerable impact on mental performance.     

Preparation of aluminium-magnesium alloys and some valuable salts from used beverage cans

The purpose of this work is to recover standard aluminium-magnesium alloy(s) and some valuable salts from used beverage cans (UBCs). The suggested method updated the current recycling technology by augmenting removal of the coating paint, decreasing magnesium loss during melting process and improving hydrochloric acid leaching of the formed slag. Iron impurity present in the leaching solution, was removed by oxidation using oxygen gas or hydrogen peroxide and filtered as goethite. Results obtained revealed that a mixture of methyl ethyl ketone/dimethyl formamide entirely removes the paint coating at room temperature. The process compares favorably to the current methods involving firing or swell peeling. The coating decomposes to titanium dioxide by heating at 750 degrees C for 30 min. Standard compositions of Al-Mg alloys are formulated using secondary magnesium. The extent of recovery (R) of these alloy(s) is a function of the melting time and temperature and type of the flux. The maximum (R) value amounts to 94.4%. Sodium borate/chloride mix decreases magnesium loss to a minimum. The extent of leaching valuable salts from the slag increases with increasing the molarity, stoichiometric ratio and leaching temperature of the acid used. Removal of iron is a function of the potential of the oxidation process. Stannous chloride has been recovered from the recovered and dried salts by distillation at 700-750 degrees C.     

Activity concentration of caesium-137 in agricultural soils

In this study, we measured 137Cs activity concentrations in the soil samples taken from agricultural lands in the Buyuk Menderes Basin in Turkey in 1997 and 1998. The soil samples were collected from 42 sites in this Basin. The activity concentration of 137Cs was found to range between 2.81+/-0.17 Bq.kg(-1) and 20.75+/-0.29 Bq.kg(-1). The effect of organic matter, clay, silt and sand contents and pH of the soil on the relative adsorption of the 137Cs on the soil surface were also studied.     

Antimony induces oxidative stress and cell death in normal hepatocytes

Antimony (Sb) accumulates in the liver which is one of the target organs for metal-mediated toxicity. Although toxicity of Sb was previously investigated, the precise mechanism of Sb-induced hepatotoxicity remains to be determined. The aim of this study was to examine the role of oxidative stress, and mitochondria in the induction of cell death by Sb. Our results showed that liver cell lysis induced by Sb is mediated by reactive oxygen species (ROS) formation, lipid peroxidation and decline of mitochondrial membrane potential (MMP). Antimony-induced ROS formation, lipid peroxidation and reduction of MMP were significantly diminished by antioxidants and ROS scavengers such as dimethyl sulfoxide and mannitol; mitochondrial permeability transition (MPT) pore sealing agents such as carnitine and trifluoperazine; and adenosine triphosphate (ATP) generator, L-glutamine. Antimony-induced ROS formation, lipid peroxidation and fall in MMP were potentiated by glutathione (GSH) depletion via n-bromoheptane. MPT pore sealing agents and ATP generator inhibited hepatotoxicity, indicating Sb-activated cell death via mitochondrial pathway. Pretreatment of hepatocytes with antioxidants and ROS scavengers also blocked cell death induced by Sb, whereas GSH depletion enhances Sb-induced cell death, suggesting that oxidative stress may be directly involved in the reduction of MMP. These findings contribute to a better understanding of the mechanisms that mediate Sb-induced cell death in isolated rat hepatocytes.     

Phytoremediation of aquaculture wastewater for water recycling and production of fish feed

Five plants were examined for their ability to remove nutrients from aquaculture wastewater and suitability as fish feed: alfalfa, white clover, oat, fall rye, barley. The seeds were first germinated in water in a hydroponic system, and the plants were fed wastewater from Tilapia production facility. Clover and alfalfa seeds were infected with fungus shortly after germination, and their roots were completely destroyed by day 14. Oat, rye and barley had the fastest growth and showed greater tolerance to fungal disease compared with alfalfa and clover. Although substantial amounts of soluble and insoluble substances were released by the seeds during the germination period, the plants were able to remove all the pollutants in wastewater and significant portions of those released substances. The total reductions in total solids, COD, NO3-N, NO2-N, phosphate and potassium ranged from 54.7% to 91.0%, 56.0% to 91.5%, 82.9% to 98.1%, 95.9% to 99.5%, 54.5% to 93.6% and 99.6% to 99.8%, respectively. Oat, barley and rye grow well in this type of hydroponic system and can be used as a fish feed after being supplemented with fat, Ca, Na, Mn and Fe. Oil seeds and the chlorides of these elements could be added to these plants when formulating the fish feed. For a continuous operation, a two-unit system could be configured to allow for one week germination and one week cleaning and startup in one unit while the other unit is in operation.     

Salinity modulates biochemical and histopathological changes caused by silver nanoparticles in juvenile Persian sturgeon (Acipenser persicus)

Environmental Science and Pollution Research - The objective of this study was to evaluate the effect of salinity on the acute and sub-chronic toxicity of silver nanoparticles (AgNPs) in Persian...