Assessment of heterogeneity of metal composition of fine particulate matter collected from eight U.S. counties using principal component analysis

The main objectives of this study are to (1) characterize chemical constituents of particulate matter (PM) and (2) compare overall differences in PM collected from eight US. counties. This project was undertaken as a part of a larger research program conducted by the Johns Hopkins Particulate Matter Research Center (JHPMRC). The goal of the JHPMRC is to explore the relationship between health effects and exposure to ambient PM of differing composition. The JHPMRC collected weekly filter-based ambient fine particle samples from eight US. counties between January 2008 and January 2010. Each sampling effort consisted of a 5-6-week sampling period. Filters were analyzed for 25 metals using inductively coupled plasma mass spectrometry (ICP-MS). Overall compositional differences were ranked by principal component analysis (PCA). The results showed that weekly concentrations of each element varied 3-40 times between the eight counties. PCA showed that the first five principal components explained 85% of the total variance. The authors found significant overall compositional differences in PM as the average of standardized principal component scores differed between the counties. These findings demonstrate PCA is a useful tool to identify the differences in PM compositional mixtures by county. These differences will be helpful for epidemiological and toxicological studies to help explain why health risks associated with PM exposure are different in locations with similar mass concentrations of PM.     

Seasonal and local variation of Cr, Ni and Co concentrations in Ulva rigida C. Agardh and Enteromorpha linza (Linnaeus) from Thermaikos Gulf, Greece

Cobalt, nickel and chromium concentrations were determined in Enteromorpha linza and Ulva rigida in seawater and sediment after seasonal collection from Thermaikos Gulf, Greece. Industrial waste and sewage is poured into this Gulf. The relative abundance of metals in the seaweeds and seawater decreased in the order Ni > Cr > Co, whereas in the sediment the order was Cr > Ni > Co. The two seaweeds bioaccumulated similar metal concentrations. The seasonal variation of metals in the two algae was not significant, but seemed to depend on the growth dynamics, the age of the tissue, the metal concentrations in the environment and the abiotic factors (such as salinity and temperature). Only Cr concentrations in E. linza showed significant local variation which depended on the area into which the industrial and domestic wastes were discharged and on their transport by sea currents. Nickel and chromium concentrations in U. rigida and Cr concentrations in E. linza displayed significant positive correlation with their concentrations in the seawater. Concentrations of the three metals in the seaweeds and seawater of Thermaikos Gulf generally exceeded the 'background' levels.     

Influence of constant and fluctuating temperature on biodegradation rates of fish biodiesel blends contaminating Alaskan sand

Bioremediation of sandy soil contaminated with fish-biodiesel, conventional diesel, and blends of both was studied in microcosm experiments at different temperatures, simulating the subarctic environment. While distinct lag, exponential, and stationary phases were observed at 20 °C, degradation at 6 °C was slow and the lag phase continued throughout the 4-week experiment. A three-phase 1st order kinetic model successfully described respiration at 20 °C, a one-phase model was sufficient at 6 °C. For temperatures fluctuating between ∼6 and ∼20 °C, higher than expected microbial activity persisted at 6 °C for several days, due to the presence of active cultures, even though the soil temperature closely followed the air temperature. At 20 °C, respiration peaked already after 1 week, and 18-51% of the initially added fuel was mineralized within 4 weeks, whereby degradation was higher at higher biodiesel percentages. Biodiesel addition accelerated mineralization of blends with regular diesel beyond expectations. In blends with 20% biodiesel, the degradation rate constant was twice as high as for conventional diesel. These synergistic effects are likely due to an active microbial population. Addition of biodiesel to conventional diesel could reduce the impact of diesel spills.     

Effect of fertilisation on the potassium and radiocaesium distribution in tree stands (Pinus sylvestris L.) and peat on a pine mire

This paper compares the effects of single and repeated fertilisation on the contents of potassium, 134Cs and 137Cs in different Scots pine compartments at different levels above ground and in the peat profile 9 years after the Chernobyl disaster. The material was collected from a ditch spacing and fertilisation experiment in Finland. Above a needle potassium concentration of 3.0 mg g(-1) in composed crown samples, 137Cs and 134Cs concentrations remained at about the same level but below that the values were higher on average. This potassium value corresponded to the potassium concentrations of 3.5-3.6 mg g(-1) in the current-year needles of two topmost whorls. The result indicates an enhanced radiocaesium uptake by pine trees under severe potassium deficiency. Fertilisation with potassium-containing fertilisers decreased the caesium uptake considerably. The inhibiting effect of fertilisation on caesium uptake by trees seemed to be fairly long lasting. Fertilisation had sped up the penetration of caesium downwards in the peat profile and its moving out of the active circulation of elements between soil and plants.     

Comparison of dioxin and furan TEQ determination in contaminated soil using chemical,micro-EROD,and immunoassay analysis

High resolution mass spectrometry gas chromatography (GC/MS) is the standard method for dioxin and furan analysis in environmental matrices. Considered as very accurate, this method is however time consuming and expensive. Methods based on biological interactions have the necessary sensitivity but began only recently to be investigated in the context of environmental applications. We have compared dioxin and furan toxicity levels (expressed as toxic equivalent quantities (TEQs)) in soil samples by three analytical approaches: the micro-ethoxyresorufin-o-deethylase (EROD) bioassay (a receptor-based method), an immunoassay (antibody-based method) and GC/MS analysis (used as a reference) using a shortened extraction-purification method. Both biological methods were sensitive to interferences from compounds co-extracted from samples. Most samples were underestimated by the immunoassay and, at a greater extent, overestimated by the EROD bioassay. The average accuracy of TEQ estimation (86 +/- 45% of values established by GC/MS) and the absence of false-negatives showed by the immunoassay suggest the usefulness of this method for semi-quantitative, preliminary characterization of potentially contaminated sites.     

Clinical effects and cholinesterase activity changes in workers exposed to phorate (Thimet)

Abstract

Phorate (Thimet), an aliphatic derivative of phospnorus is a hignly toxic insecticide. In order to implement the safety measures, the clinical manifestations and cholinesterase (ChE) activity were evaluated before and after 2 weeks of exposure to this insecticide in 40 male tormulators.

The 2 week's exposure reveal signs and symptoms of toxicity in 60% of the formulators. Gastrointestinal symptoms and lowering of heart rate (bradycardia) were more prominent as compared to the neurological symptoms. A significant depression in plasma ChE activity was observed at the end of 1st week (55%) and 2nd week (71%) as compared to the respective pre‐exposure values. A recovery up to 79% of the pre‐exposure activity of this enzyme was noticed 10 days after cessation of the above exposure.     

Sediment evidence of early eutrophication and heavy metal pollution of Lake Mälaren, central Sweden

Lake M?laren is the water supply and recreation area for more than 1 million people in central Sweden and subject to considerable environmental concern. To establish background data for assessments of contemporary levels of trophy and heavy metal pollution, sediment cores from the lake were analyzed. Diatom-inferred lake-water phosphorus concentrations suggest that pre-20th century nutrient levels in S?dra Bj?rkfj?rden, a basin in the eastern part of M?laren, were higher (c. 10-20 micrograms TP L-1) than previously assumed (c. 6 micrograms TP L-1). Stable lead isotope and lead concentration analyses from 3 basins (S. Bj?rkfj?rden, Gisselfj?rden and Ask?fj?rden) show that the lake was polluted in the 19th century and earlier from extensive metal production and processing in the catchment, particularly in the Bergslagen region. The lake has experienced a substantial improvement of the lead pollution situation in the 20th century following closure of the mining and metal industry. The lead pollution from the old mining industry was large compared to late-20th century pollution from car emissions, burning of fossil fuels and modern industries.