Bioavailability of Metals in Fly Ash and Their Bioaccumulation in Naturally Occurring Vegetation: A Pilot Scale Study

A pilot scale study was conducted to find out the different forms of metals if fly ash (FA) and bioaccumulation of these metals in the naturally growing vegetation on FA dumps. The total, acid extractable, bioavailable and water soluble fraction of metals of Fe, Cu, Mn, Zn, Ni, Co and Pb, and their bioaccumulation coefficients (BAC) on naturally growing vegetation were determined. FA samples had a neutral pH, low electrical conductivity, low organic C and trace amounts of N and P. The relative abundance of total metals in FA were found in the order Fe ≤ ≤ Zn ≤ Ni ≤ Co ≤ Cu. The concentration of bioavailable (DTPA) metals depend on the type and nature of coal used in thermal power stations. In the water the extract solution, only Fe and Zn were found above detection limits. After one year only four species of naturally occurring herbaceous vegetation were found growing and Cynodon dactylon (grass) covered almost entire surface of the FA. Iron accumulated to the greatest extent in vegetation followed by Mn, Zn, Cu, Pb, Ni and Co. The sequence of BAC for different metals were Fe (202) ≤ Mn (90) ≤ Zn (63) ≤ Pb (49) ≤ Ni (41) ≤ Cu (24). The experimental study revealed that Cynodon grass could be used for remediation of fly ash without any amendments, as this grass species act as metal excluder type.     

A methodology for evaluation and monitoring of recurring hazards in underground coal mining

This study provides a methodology for evaluation and monitoring of recurring hazards in underground coal mining. An important measure in this regard may be the ‘time between occurrences’ (TBO) of hazards that can be modeled in the similar fashion of ‘time between failures’ (TBF) data modeling which is practiced in reliability study. Typically, time between accidents is modeled in safety study. This study is therefore new in two counts: (i) statistically modeling hazard occurrences based on inspection reports and (ii) monitoring of safety status based on control charting of hazard occurrences. The methodology includes Weibull-distribution based hazard rate functions, Poisson-distribution based cumulative risk functions, and Weibull-distribution based control charts. The new methodology is applied to an underground coal mining worksystem and the results are discussed. The case study results show that hazards related to machinery, ground-fall, housekeeping, roadways, and materials are more frequently occurring. It is recommended that in addition to planned inspections for identification of hazards, a control chart based hazard mitigation scheme should be employed at the mine sections for better monitoring and control of hazards.     

Identifying the source and accessing the spatial variations,contamination status,conservation threats of heavy metal pollution in the river waters of Sunderban biosphere reserve,India

This study emphasizes on identification of source and accessing the spatial variation of dissolved heavy metals (Cu, Cd, Fe, Ni, Pb and Zn) in the rivers of Sundarban Biosphere Reserve India, the UNESCO world heritage site. ANOVA (Analysis of Variance), PCA (Principal Component Analysis) as well as FA (Factor Analysis) are used for assessing the significant difference in means of metals concentration among the sites and understanding the sources of these pollutants. Three principal components with cumulative variance of 32, 55, and 73 %, show that Pb, Ni and Cd are closely associated with each other indicating an anthropogenic origin of these metals. Heavy metal evaluation index (HEI) values indicate that areas close to densely populated sites are affected by elevated metals concentration due to anthropogenic activities. The ratio between the concentration of Cd, Ni and Pb in sites and the maximum respective permissible limit for these metals for conserved habitat is Log₁₀ normalized to understand the threats of these pollutants over the distributaries of Sundarbans. Pb pollution is prevalent in the areas that rely on the fossil fuel-operated boats, for transport, whereas higher Cd concentration is found in the areas dependent on rechargeable batteries to meet their energy demand. So these anthropogenic activities and mal-practices may be responsible for the heavy metal pollution in this region. The study concludes that gradual increase in metal pollution in river water due to anthropogenic activities, particularly Pb and Cd, could have a negative impact on the conserved flora and fauna of this ecosystem.     

Distribution of PM2.5 and PM10-2.5 in PM10 Fraction in Ambient Air Due to Vehicular Pollution in Kolkata Megacity

This research paper aims at establishing baseline PM₁₀ and PM_2.5 concentration levels, which could be effectively used to develop and upgrade the standards in air pollution in developing countries. The relative contribution of fine fractions (PM_2.5) and coarser fractions (PM_10-2.5) to PM₁₀ fractions were investigates in a megacity which is overcrowded and congested due to lack of road network and deteriorated air quality because of vehicular pollution. The present study was carried out during the winter of 2002. The average 24h PM₁₀ concentration was 304 μg/m³, which is 3 times more than the Indian National Ambient Air Quality Standards (NAAQS) and higher PM₁₀ concentration was due to fine fraction (PM_2.5) released by vehicular exhaust. The 24h average PM_2.5 concentration was found 179 μg/m³, which is exceeded USEPA and EU standards of 65 and 50 μg/m³ respectively for the winter. India does not have any PM_2.5 standards. The 24 h average PM_10-2.5 concentrations were found 126 μg/m³. The PM_2.5 constituted more than 59% of PM₁₀ and whereas PM₁₀-PM_2.5 fractions constituted 41% of PM₁₀. The correlation between PM₁₀ and PM_2.5 was found higher as PM_2.5 comprised major proportion of PM₁₀ fractions contributed by vehicular emissions.     

Ecological Restoration of Coal Mine‐Degraded Lands in Dry Tropical Climate: What Has Been Done and What Needs to Be Done?

In developed countries, ecological restoration is a widely accepted practice to restore the productivity of degraded coal mine spoils and prevent mine‐degraded sites from acting as sources of pollution. During the past decade, ecologists realized the global need for ecological restoration, and the benefit of restoration is now assessed on the basis of ecosystem services that the restored lands can provide. In this article, the knowledge gap between crude reclamation and ecological restoration is examined, the steps crucial to ecological restoration in tropical conditions are identified, and simple guidelines are given for easy understanding. Restoration issues, such as modification of the forestry restoration approach, reestablishment of biodiversity, removal and reuse of topsoil during progressive and final stages of ecological restoration, drainage, promotion of a plant‐succession‐based approach, use of a grass–legume mixture as an initial colonizer, stabilization of steep slopes, and soil blanketing, are discussed. Those attributes of a degraded ecosystem that are responsible for the success of any restoration project are critically examined, and the opportunities provided by ecological restoration are explored.     

Bioreclamation of coalmine overburden dumps—with special empasis on micronutrients and heavy metals accumulation in tree species

Major environmental impacts of opencast mining are degradation of landscape and aesthetics of the area by creating huge overburden dumps and deep voids at the mining sites. These overburden dumps are characterised by high rock fragment contents, low moisture retention capacity, higher bulk density, low nutrients, lower pH and elevated metal concentrations. Overburden dumps are reclaimed by tree species for stabilising as well as pollution control and overall improvement of the visual aesthetics. A field study was carried out in the old reclaimed coal mine overburden dumps at KD Heslong project, Central Coalfields, India to study the physico-chemical changes in the reclaimed overburden dumps and determines the magnitude of trace elements accumulation in the planted tree species. Total, bioavailable and acid extractable trace metals concentration in minesoils of overburden dump and topsoil in the mining areas was compared with undisturbed soil. The study showed that tree plantation improves the moisture contents, bulk density, pH and overall nutrient contents of minesoils. The study revealed that lower pH in the minesoils increases the bioavailabity of metals but concentration were found within toxic limits. However, ratio between total and bioavailable metals was found lower in overburden dumps than topsoil due to low pH and lack of organic matter. Out of six tree species studied, Bambusa shows highest accumulation of Fe and Cr. Bioaccumulation coefficient for Cr and Zn was found 74 times in Bambusa and 83 times in Dalbergia sissoo. The results of the study underscore the need for close monitoring of trace elements in reclaimed overburden dumps. Tree species like Dalbergia sissoo, Eucalyptus, Cassia seamea, Acaccia mangium and Peltaphorum were found to be the best species for bioreclamation of overburden dumps.     

Bioaccumulation and translocation of metals in the natural vegetation growing on fly ash lagoons: a field study from Santaldih thermal power plant, West Bengal, India

A field study was conducted in the fly ash lagoons of Santandih Thermal Power Plant located in West Bengal (India) to find out total, EDTA and DTPA extractable metals in fly ash and their bioaccumulation in root and shoot portion of the naturally growing vegetation. Fly ash sample has alkaline pH and low conductivity. The concentration of total Cu, Zn, Pb and Ni were found higher than weathered fly ash and natural soil, where as Co, Cd and Cr were found traces. Five dominant vegetation namely, Typha latifolia, Fimbristylis dichotoma, Amaranthus defluxes, Saccharum spontaenum and Cynodon dactylon were collected in the winter months (November–December). Bioaccumulation of metals in root and shoot portions were found varied significantly among the species, but all concentration were found within toxic limits. Correlation between total, DTPA and EDTA extractable metals viz. root and shoot metals concentration were studied. Translocation factor (TF) for Cu, Zn and Ni were found less than unity, indicates that these metals are immobilized in the root part of the plants. Metals like Mn have TF greater than unity. The study infers that natural vegetation removed Mn by phytoextraction mechanisms (TF > 1), while other metals like Zn, Cu, Pb and Ni were removed by rhizofiltration mechanisms (TF < 1). The field study revealed that T. latifolia and S. spontaenum plants could be used for bioremediation of fly ash lagoon.     

Biodiversity variability and metal accumulation strategies in plants spontaneously inhibiting fly ash lagoon,India

Environmental Science and Pollution Research - Out of 29 plant species taken into consideration for biodiversity investigations, the present study screened out Cyperus rotundus L., Calotropis...     

Plant canopies: bio-monitor and trap for re-suspended dust particulates contaminated with heavy metals

Urban and peri-urban vegetation is being considered for air pollution abatement. Appropriate plants with efficiency to adsorb and absorb air-pollutants are the prerequisite for green space development. The contributions of surface morphology towards plant’s ability to function as dust particulate adsorber and distribution of trace elements over the leaves are investigated in the present study. Dust interception efficiency was estimated for two roadside plant species named Ficus benghalensis, and Polyalthia longifolia. Leaves of both the plants are capable of capturing dust in the range of 0.12 mg/cm² to 1.89 mg/cm² on either of the leaf surfaces. However, variation in dust capturing capacity between the plants was observed. Leaf surface characters such as roughness, length, frequency of trichomes and frequency of stomata played a significant role in capturing re-suspended dust. Frequency (2 to 4 per 0.0004 cm²) and length (152.5 to 92.1 cm) of trichome showed negative co-relation trend, where as frequency and size of stomata showed positive co-relation trend. Elemental analysis by Scanning Electron Microscope attached with Energy Dispersive X-Ray Spectrometer (SEMEDS) indicated the presence of elements such as Sodium (Na), Magnesium (Mg), Aluminium (Al), Silicon (Si), Chlorine (Cl), Pottasium (K), Calcium (Ca), Iron (Fe), Zinc (Zn) and Arsenic (As). The results support the fact that plant canopies can be used for mitigation and bio-monitoring of air pollution as well.     

Development of worksystem safety capability index (WSCI)

This study proposes a new way of analyzing and evaluating worksystem safety based on probability models, control charts, loss functions and safety capability index. The step-by-step procedures for development of worksystem safety capability index (WSCI) are presented. The development starts with the adoption of process approach to model safety. The key feature of this development is the effective assimilation of quality engineering concepts into safety study. A case study was done in an underground coal mining situation to operationalize the development. Time between occurrences (TBO) of injuries and number of injuries (NOI) per month are considered as safety performance variables. The application shows encouraging results for safety improvement through adoption of control charts, expected loss and WSCI. The development opportunity, application potential and future scope of research are discussed.