Fluoride and nitrate in groundwater of rural habitations of semiarid region of northern Rajasthan,India: a hydrogeochemical,multivariate statistical,and human health risk assessment perspective

Environmental Geochemistry and Health - In arid and semiarid regions, groundwater is required for the drinking, agriculture, and industrial activities due to scarcity of surface water. Groundwater...     

The relationship between corporate social responsibility,environmental investments and financial performance: evidence from manufacturing companies

Environmental Science and Pollution Research - The primary objective of this research is to ascertain the relationship between corporate social responsibility, environmental investments and...     

Distribution and risk assessment of organochlorine contaminants in surface water from River Chenab, Pakistan

Concentrations in surface waters (including particulate phase) of the River Chenab ranged from 27-1100 ng L(-1) and 25-1200 ng L(-1) for OCPs and 7.7-110 ng L(-1) and 13-99 ng L(-1) for PCBs during summer and winter, respectively from 2007-2009. DDTs exhibited the highest concentration, followed by HCHs > chlordane > ∑(24)PCBs > ∑other OCPs. Different indicative ratios for organochlorines suggest that current use, long range transport and also past application of these chemicals contribute to the total burden. Statistical analysis highlighted agricultural and industrial activities and municipal waste disposal as main sources of OCPs and PCBs in the riverine ecosystem of the River Chenab. Risk Quotients (RQ(CCCs)) > 10 for DDTs and PCBs levels in collected water samples from the River Chenab suggest that risk from DDTs and PCBs is moderate to severe and fluxes calculated for OCPs and PCBs from the River Chenab to the Indus River were 7.5 tons per year and 1.0 tons per year, respectively.     

Seasonal variation of different microorganisms with nickel and cadmium in the industrial wastewater and agricultural soils

Wastewater and soil samples were collected from the industrial area of Ghaziabad City, India from January 2005 to December 2007 and were analyzed for the presence of heavy metals by atomic absorption spectrophotometry. Test samples revealed high levels of Fe, Cr, Cu, Ni, Zn, and Cd as 967.03, 34.63, 27.97, 19.7, 16.70, and 3.20 mg/L of wastewater, respectively. The concentrations of inorganic minerals were higher in the soil samples irrigated with wastewater. Total coliforms were found to be maximum (1,133 × 10⁴ most probable number per 100 mL) during spring and summer followed by winter and postmonsoon in the wastewater samples. The microbial count in soil as well as in wastewater decreases as the metal concentration increases. The concentration 200 μg/mL of nickel and cadmium inhibits majority of the population, while, at some points, it inhibits 100% of the population. The exponential decay model for microbial count at the increasing metal concentrations indicate that asymbiotic N₂ fixers were best fitted to the model. In all the seasons, the order of decline in terms of exponential decay of the population of different microbial groups in soil was asymbiotic N₂ fixers > actinomycetes > fungi > aerobic heterotrophic bacteria. The different microbial groups that have different values of slope in different seasons indicate that the resistant population of microorganisms was variable with seasons.     

Development of controlled release formulations of carbofuran and imidacloprid and their bioefficacy evaluation against aphid, Aphis gossypii and leafhopper, Amrasca biguttula biguttula Ishida on potato crop

Controlled release (CR) formulations of carbofuran and imidacloprid were prepared employing polyvinyl chloride and carboxymethyl cellulose (CMC) and their bioefficacy was evaluated against the aphid, Aphis gossypii and leafhopper, Amrasca biguttula biguttula Ishida on potato crop. The CR formulations of carbofuran and imidacloprid provided better or equal control of the pests than commercial formulations. CMC-based formulation provided a superior control of both the pests. The Imida-CMC, which showed the lowest population of leaf hopper (10.50 leafhopper/100 cl), provided significantly superior control among all treatments after 35 days after germination (DAG). The residue of carbofuran and imidacloprid in potato tuber and soils were not detectable at the time of harvesting in any one of the formulations.     

Polybrominated diphenyl ethers (PBDEs) in feathers of colonial water-bird species from Pakistan

Feathers of two colonial water-birds species (Bubulcus ibis, Egretta garzetta) from four heronries in the Punjab province, Pakistan were analysed for 28 Polybrominated Diphenyl Ethers (PBDEs) congeners. Median concentrations of ∑PBDEs were 2.41 and 1.91 ng/g in little and cattle egrets. PBDE-47, -100, -138, -153 were abundant and detected in >70% of feather samples in both species. Species-specific differences based on dietary preferences indicated higher concentration of PBDE-47, -66, -75, -100, -153, -154, and -183 in fish eating little egret. BDE-47 and -100 were more frequent in little egrets and BDE-99 was more dominant in cattle egret which feed on terrestrial habitat. Higher ∑hexa- and hepta-BDEs congeners showed larger concentrations in feathers from heronries close to water bodies which receive urban and industrial effluents whereas lower-brominated congeners (BDE-47-BDE-100) dominated in rural/agricultural regions. Hazard quotients (HQs) indicated that measured ∑PBDEs pose no risk to egret population.     

Effect of oxygenated liquid additives on the urea based SNCR process

An experimental investigation was performed to study the effect of oxygenated liquid additives, H₂O₂, C₂H₅OH, C₂H₄(OH)₂ and C₃H₅(OH)₃ on NO_x removal from flue gases by the selective non-catalytic reduction (SNCR) process using urea as a reducing agent. Experiments were performed with a 150 kW pilot scale reactor in which a simulated flue gas was generated by the combustion of methane operating with 6% excess oxygen in flue gases. The desired levels of initial NO_x (500 ppm) were achieved by doping the fuel gas with ammonia. Experiments were performed throughout the temperature range of interest, i.e. from 800 to 1200 °C for the investigation of the effects of the process additives on the performance of aqueous urea DeNO_x. With H₂O₂ addition a downward shift of 150 °C in the peak reduction temperature from 1130 to 980 °C was observed during the experimentation, however, the peak reduction efficiency was reduced from 81 to 63% when no additive was used. The gradual addition of C₂H₅OH up to a molar ratio of 2.0 further impairs the peak NO_x reduction efficiency by reducing it to 50% but this is accompanied by a downward shift of 180 °C in the peak reduction temperature. Further exploration using C₂H₄(OH)₂ suggested that a 50% reduction could be attained for all the temperatures higher than 940 °C. The use of C₃H₅(OH)₃ as a secondary additive has a significant effect on the peak reduction efficiency that decreased to 40% the reductions were achievable at a much lower temperature of 800 °C showing a downward shift of 330 °C.     

Degradation of aldrin and endosulfan in rotary drum and windrow composting

Removal efficiencies, kinetics and degradation pathways of aldrin, endosulfan α and endosulfan β in vegetable waste were evaluated during rotary drum and conventional windrow composting. The highest percentage removal of aldrin, endosulfan α and endosulfan β in rotary drum composting was 86.8, 83.3 and 85.3% respectively, whereas in windrow composting, it was 66.6%, 77.7% and 67.2% respectively. The rate constant of degradation of aldrin, endosulfan α and endosulfan β during rotary drum composting ranged from 0.410–0.778, 0.057–0.076 and 0.009–0.061 day^?1 respectively. The pathways of degradation of these pesticides in composting process were proposed. Metabolites dieldrin and 1 hydroxychlorodene formed during composting of aldrin in the vegetable waste indicated the occurrence of epoxidation reaction and oxidation of bridge carbon of aldrin containing the methylene group. Formation of chloroendic acid and chloroendic anhydride during composting of endosulfan containing vegetable waste support the occurrence of endosulfan sulfate and dehydration reaction respectively.     

Bioavailability and dissipation of fluridone under controlled conditions

Abstract

Bioavailability of fluridone, l‐methyl‐3‐phenyl‐5‐[3‐(trifluoromethyl) phenyl]‐4(1H)‐pyridinone, as affected by soil temperature, soil moisture regime, and duration of incubation was investigated in three soil types by grain sorghum (Sorghum bicolor [L.] Moench cv. Abu Sabien) chlorophyll bioassay. Initial loss of fluridone was rapid and dissipation followed first‐order kinetics under most of the incubation treatments investigated. Soil moisture, in general, had a greater impact than soil temperature on dissipation of fluridone. The herbicide dissipated faster at the fluctuating room temperature (18–24°C) than at the constant 10°C in Sonning sandy clay loam (O.M. = 1.2%) and Erl Wood sandy loam (O.M. = 2.5%) but not in Shropshire loamy peat (O.M. = 33%). In the two mineral soils, bioassay‐detectable residues from an initial rate of 1.00 μg/g were least (0.00 ‐ 0.10 μg/g) at 1/2 field capacity (FC) and greatest (0.16 ‐ 0.37 μg/g) at 1/4 FC, 400 days after treatment. At 10°C, the DT₅₀ values (days) at 1/4 FC and 1/2 FC were, respectively, 147 ± 16 and 69 ± 6 for Erl Wood soil, and 257 ± 28 and 51 ± 12 for Sonning soil. In Shropshire soil, concentrations of bioavailable fluridone were least at each bioassay date when soil moisture was maintained at FC, at both temperatures of incubation. At 10°C, herbicide concentrations in the organic soil from an initial rate of 10.00 μg/g were 0.95 and 4.69 μg/g, respectively, at FC and 1/4 FC.     

Relationship between heavy metals concentrations in egret species,their environment and food chain differences from two Headworks of Pakistan

Concentration of ten metals (Cd, Cr, Co, Cu, Fe, Li, Mn, Ni, Pb and Zn) were analyzed in the egg contents, prey and soil samples of little egret (Egretta garzetta) and cattle egret (Bubulcus ibis) from two Headworks to determine habitat and species-specific differences; to assess the importance of prey and habitat contamination as an exposure source for heavy metals. Concentration of Cu, Mn, Cr and Pb in egg contents, Fe, Co, Cu, Mn, Zn in prey and Fe, Co, Cu, Ni, Li in surface soils were significantly different (P < 0.05). Mean metal concentrations of Cr, Pb and Cd were relatively higher in little egret whereas Cu and Mn were higher in the egg contents of cattle egret. The mean concentrations of Cu, Mn and Zn were higher in prey samples of cattle egrets and Cr, Cd and Pb in prey samples of little egrets. In soil samples collected from little egret heronries metal concentrations were higher except Cu and Ni. Correlation Analysis and Hierarchical Agglomerative Cluster Analysis (HACA) identified relatively similar associations of metals and their source identification. Metals such as Fe, Cu, Mn, and Li were related with geochemical origin from parent rock material as well as anthropogenic input whereas Cr, Cd, Pb, Ni, Co and Zn were associated mostly with anthropogenic activities. The study suggested that eggs are useful bio-monitor of local heavy metal contamination.