Comparative cancer risk assessment of THMs in drinking water from well water sources and surface water sources

This research evaluates the lifetime cancer risks from trihalomethanes in Tehran's drinking water. The Trihalomethanes were measured in seven different water districts. Sixty-three samples were taken from tap water across the city for 7 months. The samples were analyzed for trihalomethanes using US EPA method 524.2. The average concentration of total trihalomethanes in different districts were between 0.81 and 9.0 μg/L, and the highest concentrations were detected in district 2 at 19.5 μg/L. Total lifetime cancer risks assessment from exposure to trihalomethanes in drinking water (ingestion, inhalation, and skin routes) were performed for people living in different districts in Tehran. The lifetime cancer risk was 7.19 × 10(-5) in district 2 (a more affluent neighborhood) where mostly surface water sources is used to supply drinking water and 9.38 × 10(-6) in district 7 (a less affluent neighborhood) which is mainly supplied with well water sources. Based on the population data, the total expected lifetime cancer cases from exposure to trihalomethanes are 104, 108, 81, 81, 41, 27, and three for districts 1 through 7, respectively. The average lifetime cancer risk was 4.33 × 10(-5) which means a total of 606 lifetime cancer cases for the entire province of Tehran. The highest risk from THMs seems to be from the inhalation route followed by ingestion and dermal contacts.     

Examination of the operator and compensator tank role in urban wastewater treatment using activated sludge method

No doubt, operator is one of the main fundaments in wastewater treatment plants. By identifying the inadequacies, the operator could be considered as an important key in treatment plant. Several methods are used for wastewater treatment that requires spending a lot of cost. However, all investments of treatment facilities are useable when the expected efficiency of the treatment plant was obtained. Using experienced operator, this goal is more easily accessible. In this research, the wastewater of an urban community contaminated with moderated, diluted and highly concentrated pollution has been treated using surface and deep aeration treatment method. Sampling of these pilots was performed during winter 2008 to summer 2009. The results indicate that all analyzed parameters were eliminated using activated sludge and surface aeration methods. However, in activated sludge and deep aeration methods in combination with suitable function of operator, more pollutants could be eliminated. Hence, existence of operator in wastewater treatment plants is the basic principle to achieve considered efficiency. Wastewater treatment system is not intelligent itself and that is the operator who can organize even an inefficient system by its continuous presence. The converse of this fact is also real. Despite the various units and appropriate design of wastewater treatment plant, without an operator, the studied process cannot be expected highly efficient. In places frequently affected by the shock of organic and hydraulic loads, the compensator tank is important to offset the wastewater treatment process. Finally, in regard to microbial parameters, existence of disinfection unit is very useful.     

Integrating in-situ, Landsat, and MODIS data for mapping in Southern African savannas: experiences of LCCS-based land-cover mapping in the Kalahari in Namibia

Integrated ecosystem assessment initiatives are important steps towards a global biodiversity observing system. Reliable earth observation data are key information for tracking biodiversity change on various scales. Regarding the establishment of standardized environmental observation systems, a key question is: What can be observed on each scale and how can land cover information be transferred? In this study, a land cover map from a dry semi-arid savanna ecosystem in Namibia was obtained based on the UN LCCS, in-situ data, and MODIS and Landsat satellite imagery. In situ botanical relevé samples were used as baseline data for the definition of a standardized LCCS legend. A standard LCCS code for savanna vegetation types is introduced. An object-oriented segmentation of Landsat imagery was used as intermediate stage for downscaling in-situ training data on a coarse MODIS resolution. MODIS time series metrics of the growing season 2004/2005 were used to classify Kalahari vegetation types using a tree-based ensemble classifier (Random Forest). The prevailing Kalahari vegetation types based on LCCS was open broadleaved deciduous shrubland with an herbaceous layer which differs from the class assignments of the global and regional land-cover maps. The separability analysis based on Bhattacharya distance measurements applied on two LCCS levels indicated a relationship of spectral mapping dependencies of annual MODIS time series features due to the thematic detail of the classification scheme. The analysis of LCCS classifiers showed an increased significance of life-form composition and soil conditions to the mapping accuracy. An overall accuracy of 92.48% was achieved. Woody plant associations proved to be most stable due to small omission and commission errors. The case study comprised a first suitability assessment of the LCCS classifier approach for a southern African savanna ecosystem.     

Effects of noise pollution over the blood serum immunoglobulins and auditory system on the VFM airport workers, Van, Turkey

Noise pollution is a common health problem for developing countries. Especially highways and airports lead to noise pollution in different levels and in many frequencies. In this study, we focused on the effect of noise pollution in airports. This work aimed measurements of noise pollution levels in Van Ferit Melen (VFM) airport and effect of noise pollution over the immunoglobulin A, G, and M changes among VFM airport workers in Turkey. It was seen that apron and terminal workers were exposed to high noise (>80 dB(A)) without any protective precautions. Noise-induced temporary threshold shifts and noise-induced permanent threshold shifts were detected between the apron workers (p?<?0.001) and terminal workers (p?<?0.005). IgA values of apron terminal and control group workers were approximately the same in the morning and increased in a linear manner during the day. This increase was statistically significant (p?<?0.001). IgG and IgM values of apron, terminal, and control group workers were approximately same in the morning. Apron and terminal workers IgG and IgM levels were increased until noon and then decreased until evening as compare to control group, but these changes were not statically significant (p?>?0.05). These findings suggested that the noise pollution in the VFM airport could lead to hearing loss and changes in blood serum immunoglobulin levels of airport workers. Blood serum immunoglobulin changes might be due to vibrational effects of noise pollution. Airport workers should apply protective precautions against effect of noise pollution in the VFM airport.     

Fuzzy multiphase Markov chains to handle uncertainties in safety systems performance assessment

In this article, we address the problem of imprecision in assessing the performance of safety instrumented systems (SIS) using fuzzy multiphase Markov chains. The elementary probabilities usually considered in Markov chains are replaced by fuzzy numbers. It allows experts to express their uncertainty concerning the basic parameters of systems and to evaluate the impact of this uncertainty on the SIS performance. We show how the imprecision induces significant changes on the Safety Integrity Level of the SIS. The proposed method ensures the relevance of the results. This is validated by a comparison with the results of an enhanced Markov Analysis.     

The Relationships Between Biomechanical and Postural Stresses,Musculoskeletal Injury Rates,and Perceived Body Discomfort Experienced by Industrial Workers: A Field Study

A combination of archival, subjective, and observational field data collection methods were used to investigate the relationship between biomechanical and postural stresses, and the resulting physical strain experienced by industrial workers of a packaging plant. Assessment of physical strain was based on the number and incidence rate of Occupational Safety and Health Administration (OSHA)-reportable injuries that were recorded over a period of 27 months, and based on the self-reported ratings of perceived body discomfort. Both the biomechanical and postural stresses correlated with the musculoskeletal injury rate. The results illustrate the usefulness of postural and biomechanical analyses for assessing the risk of injury in industry.     

硝酸异辛酯的热安全性研究

为了研究十六烷值改进剂—硝酸异辛酯(EHN)的热稳定性与热危险性,采用C600微型量热仪测试硝酸异辛酯的热分解特性.利用热分析技术考察温升速率对EHN热分解特性的影响,并利用活化能、TMRad(在绝热条件下最大反应速率到达时间)和自加速分解速率(SADT)方法评价此改进剂的危险性.结果表明,EHN发生分解反应的起始放热温度和最大放热温度均随着温升速率的增加而增大,且四种温升速率的反应机理是一致的.计算得到EHN热分解活化能在143.6-213.6kJ/mol之间.通过绝热条件下TMRad评价得出EHN在常温常压条件下不易发生危险失控,EHN自加速分解温度为98℃＞75℃,即在常温条件下储运是安全的,为储运硝酸异辛酯提供有力的数据支持.     

Effect of Nutrient Management Planning on Crop Yield, Nitrate Leaching and Sediment Loading in Thomas Brook Watershed

Government priorities on provincial Nutrient Management Planning (NMP) programs include improving the program effectiveness for environmental quality protection, and promoting more widespread adoption. Understanding the effect of NMP on both crop yield and key water-quality parameters in agricultural watersheds requires a comprehensive evaluation that takes into consideration important NMP attributes and location-specific farming conditions. This study applied the Soil and Water Assessment Tool (SWAT) to investigate the effects of crop and rotation sequence, tillage type, and nutrient N application rate on crop yield and the associated groundwater ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loss. The SWAT model was applied to the Thomas Brook Watershed, located in the most intensively managed agricultural region of Nova Scotia, Canada. Cropping systems evaluated included seven fertilizer application rates and two tillage systems (i.e., conventional tillage and no-till). The analysis reflected cropping systems commonly managed by farmers in the Annapolis Valley region, including grain corn-based and potato-based cropping systems, and a vegetable-horticulture system. ANOVA models were developed and used to assess the effects of crop management choices on crop yield and two water-quality parameters (i.e., ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loading). Results suggest that existing recommended N-fertilizer rate can be reduced by 10–25 %, for grain crop production, to significantly lower ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching (P > 0.05) while optimizing the crop yield. The analysis identified the nutrient N rates in combination with specific crops and rotation systems that can be used to manage ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching while balancing impacts on crop yields within the watershed.     

Petroleum residues in the waters of the Shatt al-Arab River and the northwest region of the Arabian Gulf

During April 1980, water samples were collected from 12 sites in the Shatt al-Arab River and its estuary in the northwest region of the Arabian Gulf. The samples were extracted and the concentration of petroleum hydrocarbons were determined spectrofluorometrically, in order to provide information on the background values of oil generally present in these waters. Total hydrocarbon concentrations of these samples ranged from 2.7 to 86.7 μgL^?1 expressed in terms of Kuwait crude oil equivalents. The highest concentrations were found at sites in the Shatt al-Arab River that are near port areas.