Failure case studies of SA213-T22 steel tubes of boiler through computer simulations

Increased temperature and decreased hardness values of the tube metal and development of oxide scale on the inner surface of boiler tubes over prolonged period of time are typical problems in power plants. Appropriate life assessments or condition monitoring of boiler tube should be carried out from time to time. Computer simulations may economically support the post-failure assessment method, i.e. visual inspections, metallurgical examinations and mechanical strength measurements. However, estimations obtained from the simulations may provide an advanced warning to take preventive actions prior to failure. In this work two failure cases of the reheater and superheater tubes made of a typical material of SA213-T22 steel are evaluated. As the oxide scales are increasingly developed on the inner surface, the increasing of temperature and decreasing of hardness value in tube metal for both cases are determined. The remnant life estimations are then made in the form of creep cumulative damages.     

Analysis of elemental concentration using ICP-AES and pathogen indicator in drinking water of Qasim Abad, District Rawalpindi, Pakistan

The present study was conducted to investigate drinking water quality (groundwater) from water samples taken from Qasim Abad, a locality of approximately 5,000 population, situated between twin cities Rawalpindi and Islamabad in Pakistan. The main sources of drinking water in this area are water bores which are dug upto the depth of 250–280 ft in almost every house. The study consists of the determination of physico-chemical properties, trace metals, heavy metals, rare earth elements and microbiological quality of drinking water. The data showed the variation of the investigated parameters in samples as follows: pH 6.75 to 8.70, electrical conductivity 540 to 855 μS/cm, total dissolved solids 325.46 to 515.23 ppm and dissolved oxygen 1.50 to 5.64 mg/L which are within the WHO guidelines for drinking water quality. The water samples were analysed for 30 elements (aluminium, iron, magnesium, manganese, silicon, zinc, molybdenum, titanium, chromium, nickel, tungsten, silver, arsenic, boron, barium, beryllium, cadmium, cobalt, copper, gallium, mercury, lanthanum, niobium, neodymium, lead, selenium, samarium, tin, vanadium and zirconium) by using inductively coupled plasma atomic emission spectroscopy. The organic contamination was detected in terms of most probable number (MPN) of faecal coliforms. Overall, elemental levels were lower than the recommended values but three water bores (B-1, B-6, B-7) had higher values of iron (1.6, 2.206, 0.65 ppm), two water bores (B-1, B-6) had higher values of aluminium (0.95, 1.92 ppm), respectively, and molybdenum was higher by 0.01 ppm only in one water bore (B-11). The total number of coliforms present in water samples was found to be within the prescribed limit of the WHO except for 5 out of 11 bore water samples (B-2, B-3, B-4, B-8, B-11), which were found in the range 5–35 MPN/100 mL, a consequence of infiltration of contaminated water (sewage) through cross connection, leakage points and back siphoning.     

Effect of fishing vessels on trace metal contamination in sediments of three harbors along Iranian Oman Sea coast

In this study, the levels of natural and anthropogenic metal contamination (aluminum (Al), iron (Fe), manganese (Mn), arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn)) in surface sediments of three harbors along the Iranian coast of Gulf of Oman were examined and reported for the first time. Effect of grain size, mineralogy, normalization technique using Fe concentrations, and different sediment quality guidelines were discussed. Data from the harbors were compared with other harbors worldwide. Sediments inside the harbors are characterized by moderate and high levels of pollution by trace metals Cu (12–287 μg/g), Pb (11–1,780 μg/g), Zn (38–547 μg/g), Cr (70–2,370 μg/g), and Ni (31–116 μg/g). However, As and Cd did not show considerable pollution inside and outside the harbors. Considering that there is no industrial activity around the study harbors, the major sources of contamination in the harbors are repairing, fueling, greasing, and painting of fishing ships and boats. Mineralogy of sediments in the study area as well as trace metal concentration in reference samples taken from onshore geological units confirmed that natural inputs of Cd, Cu, Pb, and Zn in the harbors are very low while most of Ni and Cr contamination in the study area comes from erosion of ophiolitic mélange units at the North of Makran mountains.     

Five-year monitoring study of chemical characteristics of Wet atmospheric precipitation in the southern region of Jordan

Wet atmospheric samples were collected from different locations in the southern region of Jordan during a 5-year period (October 2006 to May 2011). All samples were analyzed for pH, EC, major ions (Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃ ^?, Cl^?, NO₃ ^?, and SO₄ ^2?), and trace metals (Fe²⁺, Al³⁺,Cu²⁺, Pb²⁺, and Zn²⁺). The highest ion concentrations were observed during the beginning of the rainfall events because large amounts of dust accumulated in the atmosphere during dry periods and were scavenged by rain. The rainwater in the study area is characterized by low salinity and neutral pH. The major ions found in rainwater followed the order of HCO₃?>?Cl^??>?SO₄ ^2? and Ca²⁺?>?Na⁺ > Mg²⁺ > NH₄ ⁺ > K⁺. Trace metals were identified to be of anthropogenic origin resulting from cement and phosphate mining activities located within the investigated area and from heating activities during the cold period of the year (January to April). The wet precipitation chemistry was analyzed using factor component analysis for possible sources of the measured species. Factor analysis (principal component analysis) was used to assess the relationships between the concentrations of the studied ions and their sources. Factor 1 represents the contribution of ions from local anthropogenic activities, factor 2 represents the contribution of ions from natural sources, and factor 3 suggests biomass burning and anthropogenic source. Overall, the results revealed that rainwater chemistry is strongly influenced by local anthropogenic sources rather than natural and marine sources, which is in a good agreement with the results obtained by other studies conducted in similar sites around the world.     

Use of Maize (<Emphasis Type="Italic">Zea mays</Emphasis> L.) for phytomanagement of Cd-contaminated soils: a critical review

Maize (Zea mays L.) has been widely adopted for phytomanagement of cadmium (Cd)-contaminated soils due to its high biomass production and Cd accumulation capacity. This paper reviewed the toxic effects of Cd and its management by maize plants. Maize could tolerate a certain level of Cd in soil while higher Cd stress can decrease seed germination, mineral nutrition, photosynthesis and growth/yields. Toxicity response of maize to Cd varies with cultivar/varieties, growth medium and stress duration/extent. Exogenous application of organic and inorganic amendments has been used for enhancing Cd tolerance of maize. The selection of Cd-tolerant maize cultivar, crop rotation, soil type, and exogenous application of microbes is a representative agronomic practice to enhance Cd tolerance in maize. Proper selection of cultivar and agronomic practices combined with amendments might be successful for the remediation of Cd-contaminated soils with maize. However, there might be the risk of food chain contamination by maize grains obtained from the Cd-contaminated soils. Thus, maize cultivation could be an option for the management of low- and medium-grade Cd-contaminated soils if grain yield is required. On the other hand, maize can be grown on Cd-polluted soils only if biomass is required for energy production purposes. Long-term field trials are required, including risks and benefit analysis for various management strategies aiming Cd phytomanagement with maize.     

Radiochemical characterization of mineral waters in the Eastern Black Sea Region, Turkey

This study has evaluated the levels of natural radionuclides and chemical components of mineral waters in the Eastern Black Sea Region (Turkey). The mean activity concentrations of (226)Ra, (232)Th, (137)Cs, (40)K, gross alpha and gross beta were found as 129, 33, 28, 714, 125 and 170 mBq L(-1), respectively. Due to consumption of mineral waters, the radiological impact of them on the inhabitants was calculated by taking the annual intake into account through ingestion of aforementioned radionuclides. The estimated effective doses from mineral water were found to be 13.20 μSv year(-1) ((226)Ra), 2.74 μSv year(-1) ((232)Th), 0.13 μSv year(-1) ((137)Cs) and 1.62 μSv year(-1) ((40)K). The overall contribution of these radionuclides to the committed effective dose from a year's consumption of mineral water in the region is therefore estimated to be only 17.69%, which is in concordance with the recommended WHO value (100 μSv year(-1)). The chemical analysis results showed that these waters contain Na, Al, P, Cl, K, Ca, V, Mn, Fe, Ni, Cu and Zn elements. These values were evaluated and compared with the internationally verified values. This study provides important information for consumers and authorities because of their internal radiochemical exposure risk from mineral water intake.     

Transboundary Pollution and Absorptive Capacity

The impact of the investment in absorptive capacity on transboundary pollution is studied by considering two countries, each of them regulating a firm. Firms can invest in inventive research and in absorptive research to lower their pollution intensity. The absorptive research enables a firm to capture part of the inventive research made by the other one. We show that by means of adequate emission taxes, original and absorptive research and development (R&D) subsidies, regulators can reach the non-cooperative social optimum. Interestingly, we show that the investment in absorptive research enables non-cooperating regulators to better internalize transboundary pollution. The higher is the learning parameter of absorption, the greater is the proportion of transboundary pollution internalized. Therefore, it is recommended for the international community to make the patent laws more flexible and enabling learning from the research made by others more interesting. Moreover, the investment in absorptive R&D may lead to multiple equilibria necessitating non-cooperating countries to coordinate on an equilibrium, which constitutes an incentive for them to cooperate.     

修正的BP神经网络森林火灾成灾面积预测研究

以1997-2012年《中国林业统计年鉴》的全国森林火灾成灾面积为依据,应用BP神经网络模型对成灾面积进行了预测,对预测方法进行了检验.在此基础上,利用残差提出了修正的BP神经网络模型,并对预测方法进行了改进.研究结果表明,修正的BP神经网络预测精度高于BP神经网络,预测相对误差平均为7.2％,可应用于森林火灾成灾面积的预测.     

Numerical investigation of the flow profiles in the electrically enhanced cyclone

A numerical model for simulation of the electrohydrodynamic flow in an electrically enhanced cyclone is presented. A finite element approach was applied to solve the coupled equations for the positive corona-induced electric field. Three-dimensional simulations of gas flow were carried using Reynolds-Averaged Navier-Stokes equations including the Reynolds stress model and the electrohydrodynamic effect. Numerical results show that the change in the flow profile because of the influence of the corona-induced electric field is apparent when the inlet flow rate is low but is negligible at higher flow rates.