Removal and formation of chlorinated triclosan derivatives in wastewater treatment plants using chlorine and UV disinfection

Triclosan, a common antimicrobial agent, may react during the disinfection of wastewater with free chlorine to form three chlorinated triclosan derivatives (CTDs). This is of concern because the CTDs may be photochemically transformed to tri- and tetra-chlorinated dibenzo-p-dioxins when discharged into natural waters. In this study, wastewater influent, secondary (pre-disinfection) effluent, and final (post-disinfection) effluent samples were collected on two occasions each from two activated sludge wastewater treatment plants, one using chlorine disinfection and one using UV disinfection. Concentrations of triclosan and three CTDs were determined using ultra performance liquid chromatography-triple quadrupole mass spectrometry with isotope dilution methodology. Triclosan and the CTDs were detected in every influent sample at levels ranging from 453 to 4530 and 2 to 98 ng L⁻¹, respectively, though both were efficiently removed from the liquid phase during activated sludge treatment. Triclosan concentrations in the pre-disinfection effluent ranged from 36 to 212 ng L⁻¹, while CTD concentrations were below the limit of quantification (1 ng L⁻¹) for most samples. In the treatment plant that used chlorine disinfection, triclosan concentrations decreased while CTDs were formed during chlorination, as evidenced by CTD levels as high as 22 ng L⁻¹ in the final effluent. No CTDs were detected in the final effluent of the treatment plant that used UV disinfection. The total CTD concentration in the final effluent of the chlorinating treatment plant reached nearly one third of the triclosan concentration, demonstrating that the chlorine disinfection step played a substantial role in the fate of triclosan in this system.     

Selection of adsorbents for treatment of leachate: batch studies of simultaneous adsorption of heavy metals

The simultaneous adsorption of copper (Cu), cadmium (Cd), nickel (Ni), and lead (Pb) ions from spiked deionized water and spiked leachate onto natural materials (peat A and B), by-product or waste materials (carbon-containing ash, paper pellets, pine bark, and semi-coke), and synthetic materials (based on urea-formaldehyde resins, called blue and red adsorbents) or mixtures thereof was investigated. The adsorbents that gave the highest metal removal efficiencies were peat A, a mixture of peat B and carbon-containing ash, and a mixture of peat A and blue. At an initial concentration of 5 mg/l for each metal, the removal of each species of metal ion from spiked water and spiked leachate solutions was very good (>90%) and good (>75%), respectively. When the initial concentration of each metal in the solutions was twenty times higher (100 mg/l), there was a noticeable decrease in the removal efficiency of Cu²⁺, Cd²⁺, and Ni²⁺, but not of Pb²⁺. Langmuir monolayer adsorption capacities, q_m, on peat A were found to be 0.57, 0.37, and 0.36 mmol/g for Pb²⁺, Cd²⁺, and Ni²⁺, respectively. The order of metal adsorption capacity on peat A was the same in the case of competitive multimetal adsorption conditions as it was for single-element adsorption, namely Pb²⁺ > Cd²⁺ ≥ Ni²⁺. The results show that peat alone (an inexpensive adsorbent) is a good adsorbent for heavy metal ions.     

Remediation of DDT‐contaminated soil using optimized mixtures of surfactants and a mixing system

Soil contaminated with persistent pesticides, such as DDT, poses a serious risk to humans and to wildlife. A surfactant‐aided soil‐washing technique was studied as an alternative method for remediation of DDT‐contaminated soil. An ex situ soil washing method was investigated using nonionic and anionic surfactants due to the clayey structure of the contaminated soil. A mixture of 1 percent nonionic surfactant (Brij 35) and 1 percent anionic surfactant (SDBS) removed more than 50 percent of DDT from soil in a flow‐through system, whereas individual surfactants or other combinations of the surfactants had a lower removal efficiency. The soil‐washing technique was improved using a mixing system. The mixture of surfactants was optimized in the mixing system, and the combination of 2 percent Brij 35 and 0.1 percent SDBS was found to be optimum, removing 70 to 80 percent of DDT. Prewashing of the soil with tap water decreased the adsorption of surfactants to soil particles by 30 to 40 percent, and postwashing recovered 90 percent of the surfactants. © 2010 Wiley Periodicals, Inc.     

Exposure of an anoxic and contaminated canal sediment: Mobility of metal(loid)s

A derelict canal contains an estimated 9800 tonnes of anoxic sediment with highly elevated concentrations of trace elements. Lack of maintenance, reduced water levels and vegetation colonization threaten the stability of pollutants by removing existing waterlogged reduced conditions. A column leaching study of the sediment under increasingly oxidized conditions showed reductions in As mobility but increased heavy metal concentrations. In a reduced state, As mobility was higher (as a consequence of enhanced Fe and organic carbon solubility) whilst heavy metal concentrations in leachates were lower (due to markedly higher pH). Over 10 contiguous wetting and drying cycles, the consequences were profound; all trace elements were continuously leached with enhanced flushing of Fe, As, Zn and Cu. This raises concern over possible mobilization of pollutants to the wider environment, including groundwater. Options for management to stabilize contaminants are discussed that point to the importance of limiting water flow through the sediment.     

Predictability of clinical assessments for driving performance

PROBLEM: As the number of older drivers grows, it is increasingly important to accurately identify at-risk drivers. This study tested clinical assessments predictive of real-time driving performance. METHOD: Selected assessment tools considered important in the identification of at-risk older drivers represented the domains of vision, cognition, motor performance, and driving knowledge. Participants were administered the battery of assessments followed by an on-road test. A univariate analysis was conducted to identify significant factors (<.05) to be included in a multivariate regression model. RESULTS: Assessments identified as independently associated with driving performance in the regression model included: FACTTM Contrast sensitivity slide-B, Rapid Pace Walk, UFOV rating, and MMSE total score. DISCUSSION: The domains of vision, cognitive, and motor performance were represented in the predictive model. SUMMARY: Due to the dynamic nature of the driving task, it is not likely that a single assessment tool will identify at risk drivers. IMPACT ON INDUSTRY: By standardizing the selection of clinical assessments used in driving evaluations, practitioners should be able to provide services more efficiently, more objectively, and more accurately to identify at-risk drivers.     

An integrative model of managerial perceptions of employee commitment: antecedents and influences on employee treatment

An integrative model of antecedents and outcomes of managerial perceptions of employee organizational commitment was developed and tested with 490 employees of a publicly owned U.S. manufacturing firm. The results are consistent with predictions showing that self‐reported affective commitment and supervisor‐focused impression management predicted managerial perceptions of affective commitment, whereas age, tenure, education, training and development, and self‐focused impression management were related to managerial perceptions of continuance commitment. Furthermore, manager‐rated affective and continuance commitment were differentially related to supervisory treatment of the employee (i.e. receiving contingent rewards and non‐contingent punishment). The results of this study show how managers develop perceptions of affective and continuance commitment, and through their associated treatment of employees, has important implications for the ways managers may serve to enhance or detract from employee contributions to the organization. Copyright © 2008 John Wiley & Sons, Ltd.     

Reality check on career success and weak paradigms: chance still favors the hearty soul

In an earlier article, we discussed the effects of dissensus and low paradigm development on the lives and scholarly successes of junior scholars. Our analysis painted a somewhat bleak picture, but our advice for moving forward was simple, actionable, and therefore hopeful. Based on the bleak picture that was painted, one particular aspect of our work, career‐level evaluation reliability, was recently critiqued. We respond to that critique here. Copyright © 2008 John Wiley & Sons, Ltd.     

Simultaneous chemical and sensory characterization of volatile organic compounds and semi-volatile organic compounds emitted from swine manure using solid phase microextraction and multidimensional gas chromatography-mass spectrometry-olfactometry

Swine manure is associated with emissions of odor, volatile organic compounds (VOCs) and other gases that can affect air quality on local and regional scales. In this research, a solid phase microextraction (SPME) and novel multidimensional gas chromatography-mass spectrometry-olfactometry (MDGC-MS-O) system were used to simultaneously identify VOCs and related odors emitted from swine manure. Gas samples were extracted from manure headspace using Carboxen/polydimethylsiloxane (PDMS) 85-microm SPME fibers. The MDGC-MS-O system was equipped with two columns in series with a system of valves allowing transfer of samples between columns (heartcutting). The heartcuts were used to maximize the isolation, separation, and identification of compounds. The odor impact of separated compounds was evaluated by a trained panelist for character and intensity. A total of 295 compounds with molecular weights ranging from 34 to 260 were identified. Seventy one compounds had a distinct odor. Nearly 68% of the compounds for which reaction rates with OH* radicals are known had an estimated atmospheric lifetime <24 h.     

Ammonia assessment from agriculture: U.S. status and needs

Recent studies suggest that human activities accelerate the production of reactive nitrogen on a global scale. Increased nitrogen emissions may lead to environmental impacts including photochemical air pollution, reduced visibility, changes in biodiversity, and stratospheric ozone depletion. In the last 50 yr, emissions of ammonia (NH3), which is the most abundant form of reduced reactive nitrogen in the atmosphere, have significantly increased as a result of intensive agricultural management and greater livestock production in many developed countries. These agricultural production practices are increasingly subject to governmental regulations intended to protect air resources. It is therefore important that an accurate and robust agricultural emission factors database exist to provide valid scientific support of these regulations. This paper highlights some of the recent work that was presented at the 2006 Workshop on Agricultural Air Quality in Washington, D.C. regarding NH3 emissions estimates and emission factors from agricultural sources in the U.S. and Europe. In addition, several best management practices are explored as the scientific community attempts to maximize the beneficial use of reactive nitrogen while simultaneously minimizing negative environmental impacts.