Air quality in Yanbu,Saudi Arabia

Yanbu, on the Red Sea, is an affluent Saudi Arabian industrial city of modest size. Substantial effort has been spent to balance environmental quality, especially air pollution, and industrial development. We have analyzed six years of observations of criteria pollutants O₃, SO₂, particles (PM_2.5 and PM₁₀) and the known ozone precursors—volatile organic compounds (VOCs) and nitrogen oxides (NO_x). The results suggest frequent VOC-limited conditions in which ozone concentrations increase with decreasing NO_x and with increasing VOCs when NO_x is plentiful. For the remaining circumstances ozone has a complex non-linear relationship with the VOCs. The interactions between these factors at Yanbu cause measurable impacts on air pollution including the weekend effect in which ozone concentrations stay the same or even increase despite significantly lower emissions of the precursors on the weekends. Air pollution was lower during the Eids (al-Fitr and al-Adha), Ramadan and the Hajj periods. During Ramadan, there were substantial night time emissions as the cycle everyday living is almost reversed between night and day. The exceedances of air pollution standards were evaluated using criteria from the U.S. Environmental Protection Agency (EPA), World Health Organization (WHO), the Saudi Presidency of Meteorology and Environment (PME) and the Royal Commission Environmental Regulations (RCER). The latter are stricter standards set just for Yanbu and Jubail. For the fine particles (PM_2.5), an analysis of the winds showed a major impact from desert dust. This effect had to be taken into account but still left many occasions when standards were exceeded. Fewer exceedances were found for SO₂, and fewer still for ozone. The paper presents a comprehensive view of air quality at this isolated desert urban environment.

Implications: Frequent VOC-limited conditions are found at Yanbu in Saudi Arabia that increase ozone pollution if NO_x is are reduced. In this desert environment, increased nightlife produces the highest levels of VOCs and NO_x at night rather than the day. The effects increase during Ramadan. Fine particles peak twice a day—the morning peak is caused by traffic and increases with decreasing wind, potentially representing health concerns, but the larger afternoon peak is caused by the wind, and it increases with increasing wind speeds. These features suggest that exposure to pollutants must be redefined for such an environment.     

Coefficient of friction,walking speed and cadence on slippery and dry surfaces: shoes with different groove depths

Objective. The present study aimed to determine the coefficient of friction (COF), walking speed (WS) and cadence while walking on slippery and dry surfaces using shoes with different sole groove depths to predict likelihood of fall. Background. Design of shoe sole groove is crucial to prevent slipping during walking. Methods. 22 healthy young men (mean age 24.5, body mass index 22.5) volunteered for this semi-experimental study. Six different conditions of the test (combination of three shoes and two surfaces) were defined and the condition was repeated three times. In total, 396 trials (22 subjects?×?3 groove depths?×?2 surfaces?×?3 times) were obtained for data analysis. COF was recorded by force platform at 1000?Hz and walking parameters recorded using 3D motion analysis with six infrared cameras at 200?Hz. Results. The highest COF was obtained from the deepest groove depth (5.0?mm) on both dry and slippery surfaces. The COF on slippery surfaces was significantly lower in comparison with dry surfaces. WS and cadence were not significantly different on dry and slippery surfaces. Conclusion. The deeper groove is better to prevent slipping because the COF increases by increasing the shoe sole groove depth. WS did not change on dry and slippery surfaces.     

A review of botanical phytochemicals with mosquitocidal potential

Identification of novel effective mosquitocidal compounds is essential to combat increasing resistance rates, concern for the environment and food safety, the unacceptability of many organophosphates and organochlorines and the high cost of synthetic pyrethroids. An increasing number of researchers are reconsidering botanicals containing active phytochemicals in their efforts to address some of these problems. To be highly competitive and effective, the ideal phytochemical should possess a combination of toxic effects and residual capacity. Acute toxicity is required at doses comparable to some commercial synthetic insecticides while chronic or sub-chronic toxicity is required to produce growth inhibition, developmental toxicity and generational effects. In this article, we review the current state of knowledge on larvicidal plant species, extraction processes, growth and reproduction inhibiting phytochemicals, botanical ovicides, synergistic, additive and antagonistic joint action effects of mixtures, residual capacity, effects on non-target organisms, resistance, screening methodologies, and discuss promising advances made in phytochemical research.     

Cytotoxic effects of seven Tunisian hospital wastewaters on the proliferation of human breast cancer cell line MDA-231: correlation with their chemical characterization

Environmental Science and Pollution Research - Hospital wastewaters contain large amounts of pharmaceutical residues, which may eventually be discharged into the aquatic environment through...     

Determination photostability of selected agrochemicals in water and soil.

The photolysis of selected pesticides in aqueous solutions has been investigated. The photolysis produced different intermediate substances, which were also found to be soil and microbial degradation products. The phototransformation in the presence of TiO2 and humic substances leads to a disappearance of these compounds. The reaction rate is dependent on the semiconductor oxide and concentration. Photoproducts were isolated and characterized by different spectroscopic methods. Results from this study indicate that degradation products of isoproturon are more toxic on Daphnia magna than on the parent compound.     

Sequential fractionation of phosphorus in sediments of El-Fayum lakes—Egypt

The amounts and forms of potentially mobile phosphorus (P) in surface sediments of Qarun and Wadi El-Rayan lakes were evaluated during winter and summer using a sequential chemical extraction. Five sedimentary P fractions were separately quantified: loosely sorbed P (NH₄Cl-P), iron-associated P (BD-P), calcium- bound P (HCl-P), metal oxide bound P (NaOH-P), and residual P (organic and refractory P). The results indicated that the fractional composition of the examined lakes was different while the total P concentrations were approached. The inorganic P in the surface sediment mainly consisted of Ca-P followed by Fe-P in Qarun Lake, while Al-P took the second order in Wadi El-Rayan lakes. The ranks order of the different P extracts were HCl-P > residual-P ≈ NaOH-P > NH₄Cl-P > BD-P and residual-P > NH₄Cl-P > HCl-P > NaOH-P > BD-P for Qarun and Wadi El-Rayan lakes, respectively.     

Environmental geochemistry of the abandoned Mamut Copper Mine (Sabah) Malaysia

The Mamut Copper Mine (MCM) located in Sabah (Malaysia) on Borneo Island was the only Cu–Au mine that operated in the country. During its operation (1975–1999), the mine produced 2.47 Mt of concentrate containing approximately 600,000 t of Cu, 45 t of Au and 294 t of Ag, and generated about 250 Mt of overburden and waste rocks and over 150 Mt of tailings, which were deposited at the 397 ha Lohan tailings storage facility, 15.8 km from the mine and 980 m lower in altitude. The MCM site presents challenges for environmental rehabilitation due to the presence of large volumes of sulphidic minerals wastes, the very high rainfall and the large volume of polluted mine pit water. This indicates that rehabilitation and treatment is costly, as for example, exceedingly large quantities of lime are needed for neutralisation of the acidic mine pit discharge. The MCM site has several unusual geochemical features on account of the concomitant occurrence of acid-forming sulphide porphyry rocks and alkaline serpentinite minerals, and unique biological features because of the very high plant diversity in its immediate surroundings. The site hence provides a valuable opportunity for researching natural acid neutralisation processes and mine rehabilitation in tropical areas. Today, the MCM site is surrounded by protected nature reserves (Kinabalu Park, a World Heritage Site, and Bukit Hampuan, a Class I Forest Reserve), and the environmental legacy prevents de-gazetting and inclusion in these protected area in the foreseeable future. This article presents a preliminary geochemical investigation of waste rocks, sediments, secondary precipitates, surface water chemistry and foliar elemental uptake in ferns, and discusses these results in light of their environmental significance for rehabilitation.     

Presenting a conceptual pattern of HSE performance of oil trucks

Accidents are among the main problems in the oil product supply chain. The most important effective factors in these events are the kind of trucks used and their health, safety, and environment (HSE) condition. The aim of this study was to present a conceptual pattern of the HSE performance of oil trucks in oil industries. In this study, 20 truck models (with fixed tanks), in use over different periods of time, were investigated. In this regard, the criteria and sub-criteria were first determined in two parts—carrier and tank—and weighted by fuzzy analytical hierarchy process (FAHP). The results showed that the most important sub-criteria regarding the HSE factors of the carrier were resistance and strength of the front and rear shields, the brake system, and the ventilation system. The most important sub-criteria regarding the HSE factors of the tank were tank shell thickness and a good tank design shape with respect to portable material. It should be noted that the weight of the criteria with each other and sub-criteria with each other are not equal. This issue is important for decision-making. The main reason for the use of trucks with the lowest score in developing countries is the lack of attention by managers to safety issues and international standards and agreements such as the ADR.     

GIS‐Based Predictive Models of Hillslope Runoff Generation Processes1

Abstract: Successful nonpoint source pollution control using best management practice placement is a complex process that requires in‐depth knowledge of the locations of runoff source areas in a watershed. Currently, very few simulation tools are capable of identifying critical runoff source areas on hillslopes and those available are not directly applicable under all runoff conditions. In this paper, a comparison of two geographic information system (GIS)‐based approaches: a topographic index model and a likelihood indicator model is presented, in predicting likely locations of saturation excess and infiltration excess runoff source areas in a hillslope of the Savoy Experimental Watershed located in northwest Arkansas. Based on intensive data collected from a two‐year field study, the spatial distributions of hydrologic variables were processed using GIS software to develop the models. The likelihood indicator model was used to produce probability surfaces that indicated the likelihood of location of both saturation and infiltration excess runoff mechanisms on the hillslope. Overall accuracies of the likelihood indicator model predictions varied between 81 and 87% for the infiltration excess and saturation excess runoff locations respectively. On the basis of accuracy of prediction, the likelihood indicator models were found to be superior (accuracy 81‐87%) to the predications made by the topographic index model (accuracy 69.5%). By combining statistics with GIS, runoff source areas on a hillslope can be identified by incorporating easily determined hydrologic measurements (such as bulk density, porosity, slope, depth to bed rock, depth to water table) and could serve as a watershed management tool for identifying critical runoff source areas in locations where the topographic index or other similar methods do not provide reliable results.