Sediment grain size estimation using airborne remote sensing, field sampling, and robust statistic

Remote sensing has been used since the 1980s to study parameters in relation with coastal zones. It was not until the beginning of the twenty-first century that it started to acquire imagery with good temporal and spectral resolution. This has encouraged the development of reliable imagery acquisition systems that consider remote sensing as a water management tool. Nevertheless, the spatial resolution that it provides is not adapted to carry out coastal studies. This article introduces a new methodology for estimating the most fundamental physical property of intertidal sediment, the grain size, in coastal zones. The study combines hyperspectral information (CASI-2 flight), robust statistic, and simultaneous field work (chemical and radiometric sampling), performed over Santander Bay, Spain. Field data acquisition was used to build a spectral library in order to study different atmospheric correction algorithms for CASI-2 data and to develop algorithms to estimate grain size in an estuary. Two robust estimation techniques (MVE and MCD multivariate M-estimators of location and scale) were applied to CASI-2 imagery, and the results showed that robust adjustments give acceptable and meaningful algorithms. These adjustments have given the following R(2) estimated results: 0.93 in the case of sandy loam contribution, 0.94 for the silty loam, and 0.67 for clay loam. The robust statistic is a powerful tool for large dataset.     

Air quality monitoring system using lichens as bioindicators in Central Argentina

Air quality studies with bioindicators have not been well developed in South America. In the city of Córdoba, there are not permanent air pollutant measurements by equipment. In order to develop an air quality biomonitoring system using lichens, we applied a systematic sampling in the city of Córdoba, Argentina. A total of 341 plots were sampled in the area of the city which is a square of 24 × 24 km. In each sample plot we selected three phorophytes and estimated the frequency and cover of lichen species growing at 1.5 m on trunks. We also calculated the Index of Atmospheric Purity (IAP) using lichen frequencies. Maps with number of lichen species, cover values, and IAP were performed. The lichen community was described with nine species where Physcia undulata and Physcia endochryscea were the most frequent. Moreover, these two species were dominant in the community with the highest cover index. The central area of the city is considered a lichen desert with poor air quality. The southeast and northwest areas of the city showed the highest IAP values and number of species. In general, the city shows fair air quality and few areas with good and very good air quality.     

Competitive sorption of cis-DCE and TCE in silica gel as a model porous mineral solid

The competitive sorption of 1,2-cis-dichloroethene (cis-DCE) and trichloroethene (TCE) was investigated by means of column experiments using a model porous mineral solid represented by silica gel. The experimental isotherms were obtained by employing a chromatographic method. The competitive sorption isotherms were modelled with the extended Freundlich and extended Langmuir isotherms, using the parameters from single-solute experiments. The breakthrough curves were modelled with the advection-dispersion transport equation coupled with the lumped pore diffusion model. The best results were obtained when the extended Freundlich isotherm was employed. The competitive sorption was revealed with the presence of an overshoot in the breakthrough curve of cis-DCE and a decrease in the degree of sorption of cis-DCE (20%) and TCE (12%). A linear dependency of the overshoot with an increase in the concentration of cis-DCE at a fixed concentration of TCE was observed, between 16% and 20%, and at least at concentrations <6 mg L(-1) in the liquid phase. The displaced molecules of cis-DCE by TCE were accumulated through the column causing its overshoot; thus short columns may hinder its observation. Thermodynamic analysis shows an exothermic adsorption process of -34 to -41 kJ mol(-1), which is enhanced by sorption in micropores. The Gibbs free energy is positive for cis-DCE in the multi-component case, due to its displacement by TCE.     

Butyltin compounds and their relation with organic matter in marine sediments from San Vicente Bay—Chile

Tributyltin and its degradation products, mono-and dibutyltin have been determined in sediments collected in some representative sites in San Vicente Bay, Chile. The organic matter contents of sediments and water collected simultaneously from the same sampling sites were also determined. High levels of total organic carbon were found in sediments, especially in those from the northern part of the bay (1.80-8.87%). Good correlations were found between total organic carbon and the oxidizable and refractory carbon fractions. Among the butyltin species determined, TBT presented the highest levels, ranging from 14 to 1,560 ng Sn g(-1) dry weight. Concentration ratios of TBT to DBT ranged between 1.33 and 3.10, showing a high degree of contamination in sediments of this Chilean bay. All data obtained were analysed by the chemometric method of principal components analysis. A strong correlation was found between TBT and DBT concentrations in sediments, the different organic matter contents in sediments and water. In marine organisms only TBT was detected, containing the filterer organism Semele solida higher level than Perumytilus purpuratus and Pyura chilensis (220, 150 and 120 ng Sn g(-1) dry weight, respectively). For the alga Rodoficea iridae the TBT concentration was 60 ng Sn g(-1) dw. Comparatively, these values are higher than those reported for the same kind of marine organisms worldwide. The different samples from San Vicente Bay were found to be contaminated by TBT. This contamination can be attributed to the different anthropogenic activities taking place in the bay.     

Leaching composted lignocellulosic wastes to prepare container media: Feasibility and environmental concerns

The leaching of salt and mineral elements from three composts prepared with residual vegetable crop biomass (melon, pepper or zucchini) was studied using methacrylate columns and distilled water. The benefits of the leached composts to be used for ornamental potted plant production were also analysed. After leaching 5 container capacities of effluent, both the electrical conductivity and the concentration of soluble mineral elements in compost leachates decreased substantially and remained close to the target levels. Composts reacted differently to leaching due to differences in the raw waste sources and the composting process and hence, in their physical and chemical characteristics. At the end of the experiment, after pouring 8 container capacities of water, the leaching efficiency of the salts was 96%, 93% and 87% for melon, pepper and zucchini-based composts, respectively. Mineral elements differed in their ability to be removed from the composts; N (NH₄⁺ and NO₃^?), K⁺, Na⁺, Cl^?, and SO₄^2? were leached readily, whereas H₂PO₄^?, Ca²⁺, and Mg²⁺ were removed hardly. Leached composts showed a range of physico-chemical and chemical characteristics suitable for use as growing media constituents. Potted Calendula and Calceolaria plants grew in the substrates prepared with the leached composts better than in those made with the non-leached ones. Finally, special emphasis must be paid to the management of the effluents produced under commercial conditions to avoid environmental pollution.