Sorption of 2,4-dinitroanisole (DNAN) on lignin

The present study describes the use of two commercially available lignins, namely, alkali and organosolv lignin, for the removal of 2,4-dinitroanisole (DNAN), a chemical widely used by the military and the dye industry, from water. Sorption of DNAN on both lignins reached equilibrium within 10 hr and followed pseudo second-order kinetics with sorption being faster with alkali than with organosolv lignin, i.e. k₂ 10.3 and 0.3 g/(mg hr), respectively. In a separate study we investigated sorption of DNAN between 10 and 40°C and found that the removal of DNAN by organosolv lignin increased from 0.8 to 7.5 mg/g but reduced slightly from 8.5 to 7.6 mg/g in the case of alkali lignin. Sorption isotherms for either alkali or organosolv lignin best fitted Freundlich equation with enthalpy of formation, ΔH⁰ equaled to 14 or 80 kJ/mol. To help understand DNAN sorption mechanisms we characterized the two lignins by elemental analysis, BET nitrogen adsorption-desorption and ³¹P NMR. Variations in elemental compositions between the two lignins indicated that alkali lignin should have more sites (O- and S-containing functionalities) for H-bonding. The BET surface area and calculated total pore volume of alkali lignin were almost 10 times greater than that of organosolv lignin suggesting that alkali lignin should provide more sites for sorption. ³¹P NMR showed that organosolv lignin contains more phenolic -OH groups than alkali lignin, i.e., 70% and 45%, respectively. The variations in the type of OH groups between the two lignins might have affected the strength of H-bonding between DNAN and the type of lignin used.     

Long-term variability of metals from fungicides applied in amended young vineyard fields of La Rioja (Spain)

The long-term variability of total Cu content from fungicides applied in a certified wine region of Spain (La Rioja) and of other metals (Cd, Cr, Ni, Pb, and Zn) was evaluated in three young vineyard soils and subsoils unamended and amended with spent mushroom substrates (SMS) over a 3-year period (2006–2008). SMS is a promising agricultural residue as an amendment to increase the soil organic matter content but may modify the behaviour of metals from pesticide utilisation in vineyards. Fresh and composted SMS was applied each year at a rate of 25 t ha⁻¹ (dry-weight). Copper concentrations in the three unamended soils were 21.2–88.5, 25.5–77.1, and 29.4–78.4 mg kg⁻¹. They exceeded natural Cu concentrations of the region and reference sub-lethal hazardous concentration for soil organism. The concentrations of Cd, Ni, Pb, and Zn were largely below the sub-lethal limits. Thus, although Cu levels were lower than those of established vineyards, vine performance, and productivity might be affected. The variation in behaviour between different amendments for each soil was high, so a generic conclusion could not be drawn. The amendment practice seemed to have caused temporarily Cu mobilization respect to untreated soils. Total zinc concentrations fall within the range of the natural soil of La Rioja and were significantly affected (p < 0.05) especially by fresh state SMS addition, with increasing up to 75% respect to untreated specimen. The results indicated a build-up of fresh sites for metal retention at both surface and subsurface level, although no accumulation of metals was observed in the short-term period. However, the benefit for soils and the negative effects need to be monitored in the long run.     

Experimental evaluation of eco-friendly flocculants prepared from date palm rachis

Sodium carboxymethylcellulose (CMCNa) is an anionic water soluble polyelectrolyte widely used in many industrial sectors including food, textiles, papers, adhesives, paints, pharmaceuticals, cosmetics and mineral processing. CMCNa was produced by chemical modification of cellulose, and represents many advantages: natural, renewable, non-toxic and biodegradable. In this study, di erent kinds of CMCNa, prepared from an agricultural waste date palm rachis, were tested as eco-friendly flocculants for drinking water treatment and their performances as flocculants in turbidity removal enhancement were assessed. The prepared materials were characterized by the degree of substitution (DS) and polymerisation (DP). The study of the e ect of some experimental parameters on the coagulation-flocculation performance, using the prepared materials combined with aluminium sulphate (as coagulant), showed that the best conditions for turbidity treatment were given for pH 8, coagulant dose 20 mg/L, flocculant concentration of 100 mg/L and stirring velocity (during the flocculation step) of 30 r/min. Under the optimum conditions, the turbidity removal using CMCNa, prepared from raw material, was about 95%. A comparison study between the flocculation performance of a commercial anionic flocculant (A100PWG: polyacrylamide) and that of the prepared CMCNa showed that the performance of the waste-based flocculant with a DS of 1.17 and a DP of 480 was 10% better than that achieved by the commercial one.     

Hygroscopic Organic Aerosols during BRAVO?

Abstract

The hygroscopic properties of the organic fraction of aerosols are poorly understood. The ability of organic aerosols to absorb water as a function of relative humidity (RH) was examined using data collected during the 1999 Big Bend Regional Aerosol and Visibility Observational Study (BRAVO). (On average, organics accounted for 22% of fine particulate matter with an aerodynamic diameter less than 2.5 µm (PM_2.5) mass). Hourly RH exceeded 80% only 3.5% of the time and averaged 44%. BRAVO aerosol chemical composition and dry particle size distributions were used to estimate PM_2.5 light scattering (Bsp) at low and high ambient RH. Liquid water growth associated with inorganic species was sufficient to account for measured Bsp for RH between 70 and 95%.     

Optical Measurements of Aerosol Size Distributions in Great Smoky Mountains National Park: Dry Aerosol Characterization

ABSTRACT

Aerosol size distributions were measured during the summertime 1995 Southeastern Aerosol and Visibility Study (SEAVS) in Great Smoky Mountains National Park using an Active Scattering Aerosol Spectrometer (ASASP-X) optical particle counter. We present an overview of the experimental method, our data inversion technique, timelines of the size distribution parameters, and calculations of dry accumulation mode aerosol density and refractive index. Aerosol size distributions were recorded during daylight hours for aerosol in the size range 0.1 < Dp < 2.5 u,m. The particle refractive index used for the data inversion was calculated with the partial molar refractive index approach using 12-hr measured aerosol chemical composition. Aerosol accumulation mode volume concentrations ranging from 1 to 26 u,m³ cm^-3 were observed, with an average of 7 ± 5 u,m³ cm^-3. The study average dry accumulation mode geometric volume median diameter was 0.27 ± 0.03 u,m, and the mean geometric standard deviation was 1.45 ± 0.06. Using an internally mixed aerosol model, and assuming chemical homogeneity across the measured particle distribution, an average accumulation mode dry sulfate ion mass scattering efficiency of 3.8 ± 0.6 m² g^-1 was calculated.     

The application of HPLC ESI MS in the investigation of the flavonoids and flavonoid glycosides of a Caribbean Lamiaceae plant with potential for bioaccumulation

As part of an exchange technology program between the government of Barbados and Environment Canada, methanolic and aqueous extracts from the flavonoid-rich Lamiaceae family were characterized using negative-ion electrospray mass spectrometry. The species investigated is part of the Caribbean Pharmacopoeia, and is used for a variety of health issues, including colds, flu, diabetes, and hypertension. The extracts were investigated for structural elucidation of phenolics, identification of chemical taxonomic profile, and evidence of bio-accumulator potential. The methanolic and aqueous leaf extracts of Plectranthus amboinicus yielded rosmarinic acid, ladanein, cirsimaritin, and other methoxylated flavonoids. This genus also shows a tendency to form conjugates with monosaccharides, including glucose, galactose, and rhamnose. The aqueous extract yielded four isomeric rhamnosides. The formation of conjugates by Plectranthus amboinicus is thus evidence of high bioaccumulator significance.     

Studies on degradation of glyphosate by several oxidative chemical processes: Ozonation,photolysis and heterogeneous photocatalysis

Several different Advanced Oxidation Processes (AOPs) including ozonation at pH 6.5 and 10, photolysis and heterogeneous photocatalysis using TiO₂ as semiconductor and dissolved oxygen as electron acceptor were applied to study the degradation of glyphosate (N-phosphonomethyl glycine) in water. The degree of glyphosate degradation, the reactions kinetic and the formation of the major metabolite, aminomethyl phosphonic acid (AMPA), were evaluated. Ozonation at pH 10 resulted in the maximum mineralization of glyphosate. It was observed that under the experimental conditions used in this study the degradation of glyphosate followed the first-order kinetics. The half-life obtained for glyphosate degradation in the O₃/pH 10 process was 1.8 minutes.     

Mass balance of pharmaceutical and personal care products in a pilot-scale single-sludge system: influence of T, SRT and recirculation ratio

The influence of operation condition on the fate of 16 pharmaceutical and personal care products (PPCPs) in a single-sludge nitrifying/denitrifying pilot plant was assessed. Volatilisation, sorption and degradation were included in the mass balances to determine the most relevant removal mechanisms during PPCP treatment.Sludge retention time (SRT) was an important factor for the removal of compounds that significantly sorb onto sludge, as ethinylestradiol, whose removal increased 11% when working at SRT above 20 d. The internal recirculation ratio was significant for the removal of moderately biodegradable compounds, as citalopram. The positive effect of operating at warmer temperatures was particularly significant for two antibiotics, implying a 30% increase in their transformations. In the case of naproxen, an influence of sludge acclimation and concentration was observed, leading to removal efficiencies from 27% to 99%.Concerning removal mechanisms, most compounds were removed due to biotransformation, although for fragrances sorption and volatilisation played a role.