Biodegradable Blends with Potential Use in Packaging: A Comparison of PLA/Chitosan and PLA/Cellulose Acetate Films

Poly(lactic acid) (PLA) is a biodegradable polymer that exhibits high elastic modulus, high mechanical strength, and feasible processability. However, high cost and fragility hinder the application of PLA in food packaging. Therefore, this study aimed to develop flexible PLA/acetate and PLA/chitosan films with improved thermal and mechanical properties without the addition of a plasticizer and additive to yield extruder compositions with melt temperatures above those of acetate and chitosan. PLA blends with 10, 20, and 30 wt% of chitosan or cellulose acetate were processed in a twin-screw extruder, and grain pellets were then pressed to form films. PLA/acetate films showed an increase of 30 °C in initial degradation temperature and an increase of 3.9 % in elongation at break. On the other hand, PLA/chitosan films showed improvements in mechanical properties as an increase of 4.7 % in elongation at break. PLA/chitosan film which presented the greatest increase in elongation at break proved to be the best candidate for application in packaging.     

ERD of Residual TCE DNAPL Achieving Nondetect from a Single Injection of Food‐Grade Waste

Residual dense nonaqueous phase liquid (DNAPL) composed of trichloroethene (TCE) was identified in a deeper interval of an overburden groundwater system at a manufacturing facility located in northern New England. Site hydrostratigraphy is characterized by two laterally continuous and transmissive zones consisting of fully‐saturated fine sand with silt and clay. The primary DNAPL source was identified as a former dry well with secondary contributions from a proximal aboveground TCE storage tank. A single additive‐injection mobilization in 2001 utilizing a food‐grade injectate formulated with waste dairy product and inactive yeast enhanced residual TCE DNAPL destruction in situ by stimulating biotic reductive dechlorination. The baseline TCE concentration was detected up to 97,400 μg/L in the deeper interval of the overburden groundwater system, and enhanced reductive dechlorination (ERD) achieved >99 percent reduction in TCE concentrations in groundwater over nine years with no evidence of sustained rebound. TCE concentrations have remained nondetect below 2.0 μg/L for the last five consecutive sampling rounds between 2013 and 2015. ERD utilizing a food‐grade injectate is a green remediation technology that has destroyed residual DNAPL at the site and achieved similar results at other residual DNAPL sites during both pilot‐ and full‐scale applications. ©2016 Wiley Periodicals, Inc.     

Validity and reliability of a job factors questionnaire related to the work tasks of physical therapists

Physical therapists engage in work tasks that expose them to occupational risk factors related to musculoskeletal disorders. Due to the gap in the literature on instruments focused on those workers, this study adapted a job factors questionnaire to physical therapists, and assessed its psychometric properties. The questionnaire was adapted and its content validity was established. The psychometric properties were evaluated among 142 physical therapists. Reliability was verified using the temporal-stability design and internal consistency. Construct validity was assessed with the known-groups technique. Test-retest results demonstrated intraclass correlation coefficients between .82 and .90 (p < .001). Cronbach's α of .91 verified the reliability of the questionnaire. The known-groups technique demonstrated a statistically significant difference on the scores of the items when physical therapists were compared to office workers. The results indicated that the adapted questionnaire had acceptable psychometric properties for assessing problematic job factors among physical therapists working in hospitals.     

Adult-supervised practice driving for adolescent learners: The current state and directions for interventions

IntroductionThe aim of this study was to quantify and identify correlates to the amount of parent-supervised behind-the-wheel practice hours by novice teen drivers.MethodsA national survey of 945 parents of recently licensed teen drivers was conducted. Multivariate logistic regression was used to identify factors related to the number of practice hours completed.ResultsSixty-one percent of parents reported practicing 50 or more hours with their teen. Two-parent involvement was associated with more practice hours, though use of a professional driving instructor was not. Parents of teens licensed in states mandating 50 or more hours of practice driving were more likely to report at least 50 practice hours than those in states mandating 20–40 hours or in states without mandates.Impact on IndustryThe findings underscore the integral role of parents in the learning to drive process and provide further support for GDL requirements for practice hours.     

Working conditions,psychological/physical symptoms and occupational accidents. Bayesian network models

Each day thousands of workers suffer occupational accidents of varying degrees of severity. Accidents at work render workers incapable of carrying out their day to day activities, either temporarily or permanently, and they also have detrimental effects on family life, the company, and the general public. In order to reduce the occupational accident rate, it is necessary to determine the causes of those accidents. Although there are many different types of accidents, they generally stem from poor working conditions. The purpose of this study was to analyze the influence of working conditions on occupational accidents from data gathered in the VI National Survey of Working Conditions (VI NSWCs) in 2007. This survey utilized a random sample of the active population of Spain. The sample comprised 11,054 people (5917 males and 5137 females). In order to carry out the study, a probabilistic model was built using Bayesian networks. The model included the following variables: hygiene conditions, ergonomic conditions, job demands, physical symptoms, psychological symptoms, and occupational accidents. The study demonstrated that there were strong relationships between hygiene conditions and occupational accidents; it has been shown that poor hygienic conditions duplicate the probability of accident. Physical symptoms increased almost 50% due to poor ergonomic conditions. And finally, high job demands almost duplicated the psychological symptoms. The investigation also showed a high degree of interdependence between physical and psychological symptomatologies and the relationship between these and occupational accidents.     

Use of isoperibolic calorimetry for the study of the effect of water concentration,temperature and reactor venting on the rate of hydroxylamine thermal decomposition

Hydroxylamine, NH₂OH, thermal decomposition has been responsible for two serious accidents. However, its reactive behavior and the synergy of factors affecting the rate of its decomposition are not understood. In this work, isoperibolic calorimetric measurements were performed in a metal reactor, in the temperature range 130–150 °C, employing 30–80 ml solutions containing 1.4–20 g of pure hydroxylamine (2.8–40 g of the supplied reagent). The calorimetric measurements were performed in order to assess the effects that NH₂OH concentration, temperature and reactor venting has on NH₂OH rate of decomposition. The measurements showed that increased concentration or temperature, results in faster reactions and probably higher pressure generation per mass of reactant, with concentration having a more pronounced effect. However, when both factors work synergistically the result is dramatically worse in terms of reaction rate. The pressure generation is also different, thus indicating that different reaction pathways predominate each time. Venting the produced gases in stages resulted in the highest mass loss of the solution.     

Fugitive emissions in chemical processes: The assessment and prevention based on inherent and add-on approaches

Fugitive emissions are among the major concerns of industrial process releases. The emissions cause problem to various aspects including the environment, health, and economic. Early evaluation of process hazards is beneficial because process can be made inherently benign at lower cost. This paper discusses two important aspects of fugitive emissions assessment during process design – the quantification and the prevention strategies.For the quantification part, three methods are presented for fugitive emissions estimation during the process design. They are tailored to data available in simple process flow diagram (PFD), detailed PFD, and piping & instrumentation diagram (PID). Such methods are needed as early emissions estimation allows production routes and process designs with lower emissions to be selected. The fugitive emissions estimation and methods to abatement are demonstrated on a benzene process case study. Valves are found to be the major emission source with 50% of fugitive emissions of process area in a base case of petrochemical process, in which no fugitive emission reductions are yet made. Pumps without mechanical seals come second with 30% and flanges with 8% of emissions. Inherently safer design keywords can be applied to prevent fugitive emissions in the process plants. Substitution is the most applicable keyword in fugitive emission reduction of existing plants.The emission rate calculations together with estimation of health risk give a sound background for the decision making on elimination of emissions at source through equipment and piping changes. The case study presented reveals that by substituting emission prone components by inherently low-leaking ones, the plant emissions can be reduced over 90% in practice. This is created mainly by replacing rising stem valves with ball valves, installing double mechanical pump seals or hermetic pumps and making changes in sampling and relief systems. Ideally by also changing flanges to welded connections, which is not viable for various reasons, the emissions could be reduced nearly to zero.     

Control of rumen methanogenesis

During the last decades, considerable research on methane production in the rumen and its inhibition has been carried out. Initially, as methane production represents a significant loss of gross energy in the feed (2–15%), the ultimate goal of such intervention in rumen fermentation was an increase in feed efficiency. A second reason favouring research on methane inhibition is its role in the global warming phenomenon and in the destruction of the ozone layer. In this review, the authors describe briefly several interventions for reducing methane emission by ruminants. The objective can be reached by intervention at the dietary level by ration manipulation (composition, feeding level) or by the use of additives or supplements. Examples of additives are polyhalogenated compounds, ionophores and other antibiotics. Supplementation of the ration with lipids also lowered methanogenesis. More biotechnological interventions, e.g., defaunation, probiotics and introduction of reductive acetogenesis in the rumen, are also mentioned. It can be concluded that drastic inhibition of methane production is not unequivocally successful as a result of several factors, such as: instantaneous inhibition often followed by restoration of methanogenesis due to adaptation of the microbes or degradation of the additive, toxicity for the host animal, negative effects on overall digestion and productive performance. Therefore, methanogenesis and its inhibition cannot be considered as a separate part of rumen fermentation and its consequences on the animal should be taken into account.     

Environmental and sustainability indicators and the concept of situational indicators. A systems approach

Through a systems approach indicators are shown to have the nature of variables, adopting different values or states, while other associated terms allude to special meanings assigned to specific values of the indicators. Practical implications are discussed. The concept of situational indicators of sustainability is introduced, representing a non-numerical function of both “pressures” or “driving forces” and “state” variables. A cost-effective multi-tiered approach to situational indicators is proposed. The concept of situational indicators is shown to be a particular case of indicators of systems behavior. A general systems formulation of the problem of sustainability highlights the importance of indicators of systems behavior and the central role of models in their definition.