Biochar as low-cost sorbent of volatile fuel organic compounds: potential application to water remediation

Pyrolysis of waste materials to produce biochar is an excellent and suitable alternative supporting a circular bio-based economy. One of the properties attributed to biochar is the capacity for sorbing organic contaminants, which is determined by its composition and physicochemical characteristics. In this study, the capacity of waste-derived biochar to retain volatile fuel organic compounds (benzene, toluene, ethylbenzene and xylene (BTEX) and fuel oxygenates (FO)) from artificially contaminated water was assessed using batch-based sorption experiments. Additionally, the sorption isotherms were established. The results showed significant differences between BTEX and FO sorption on biochar, being the most hydrophobic and non-polar contaminants those showing the highest retention. Furthermore, the sorption process reflected a multilayer behaviour and a relatively high sorption capacity of the biochar materials. Langmuir and Freundlich models were adequate to describe the experimental results and to detect general differences in the sorption behaviour of volatile fuel organic compounds. It was also observed that the feedstock material and biochar pyrolysis conditions had a significant influence in the sorption process. The highest sorption capacity was found in biochars produced at high temperature (>?400 °C) and thus rich in aromatic C, such as eucalyptus and corn cob biochars. Overall, waste-derived biochar offers a viable alternative to be used in the remediation of volatile fuel organic compounds from water due to its high sorption capacity.

     

Larvicidal and pupicidal activities of eco-friendly phenolic lipid products from Anacardium occidentale nutshell against arbovirus vectors

Environmental Science and Pollution Research - Aedes aegypti and Culex quinquefasciatus are vectors of diseases that constitute public health problems. The discovery of products capable of...     

Trace elements and microbiological parameters in farmed Nile tilapia with emphasis on muscle,water, sediment and feed

Fish may bioaccumulate contaminants from the aquatic environment and extend them to the food chain provoking risks to human health. This study evaluated the microbiological parameters of the pond´s water and trace elements concentrations in samples of water, sediment, feed and muscle of farmed Nile tilapia used for human consumption in southern Brazil. A total of 240 fish were collected from 12 tilapia farms. Sediment, tank water and dry ration used in the animals' diet were collected for analysis. Analysis were performed by Energy Dispersion X-ray Fluorescence (EDXRF), Inductively Coupled Plasma Mass Spectrometer (ICP-MS), Induced Coupled Plasma Optical Emission Spectrometer (ICP-OES), and Atomic Absorption Spectrometer (AAS-VGA). In addition, the microbiological analysis of the water was carried out. The concentrations of Se, I, Fe, Cu and Zn in fish muscle were higher than the recommended by the Brazilian legislation, considering the advised daily intake for adults. The arsenic element had concentrations above the limit stipulated by the present Brazilian legislation, observed in all samples of muscle, sediment and tank water highlighting a possible environmental and fish contamination by the toxic element. Moreover, the arsenic concentration in the water presented a positive correlation (ρ?=?0.33) with arsenic in the muscle, suggesting that tilapia is a good environmental bioindicator, once they properly reflect the levels of arsenic in the water. It is suggested to perform an arsenic speciation for quantification of the inorganic form and accurate assessment of the degree of toxicity in the muscle samples and risks it can bring to human health. Regarding the other potentially toxic elements (Hg, Pb and Cd), and microbiological analysis of water it was verified that the consumption of the fish in question does not raise risks, since the values are within a quality benchmark established by law. The concentration of total and fecal coliforms in pond´s water in the facilities was in agreement with the microbiological indexes required by the legislation of CONAMA class II. Western region presented the lowest concentrations of fecal coliforms when compared to the other regions. There was no significant difference in the microbiological counts of total heterotrophic bacteria, Vibrio spp. and Pseudomonas spp. among the regions.     

Auxinic herbicides induce oxidative stress on Cnesterodon decemmaculatus (Pisces: Poeciliidae)

Environmental Science and Pollution Research - Pesticides might increase the production of reactive oxygen species (ROS). Dicamba (DIC) and 2,4-dichlorophenoxyacetic acid (2,4-D) are auxinic...     

Synthesis of functionalized mesoporous material from rice husk ash and its application in the removal of the polycyclic aromatic hydrocarbons

Environmental Science and Pollution Research - The rice husk ash (RHA) was used as an alternative source of silica for the synthesis of the functionalized mesoporous material, which was used in the...     

Simultaneous removal of metronidazole and Pb(II) from aqueous solution onto bifunctional activated carbons

Environmental Science and Pollution Research - In this work, it was analyzed the behavior of three commercial activated carbons with different textural and chemical properties to adsorb...     

Microplastic distribution in surface sediments along the Spanish Mediterranean continental shelf

Environmental Science and Pollution Research - Microplastics (MPs) are widely recognised as a contaminant of emerging concern in the marine environment. This work provides original data of the...     

Ovariectomy predisposes female rats to fine particulate matter exposure’s effects by altering metabolic,oxidative, pro-inflammatory,and heat-shock protein levels

Environmental Science and Pollution Research - The reduction of estrogen levels, as a result of menopause, is associated with the development of metabolic diseases caused by alterations in...     

Hierarchical priority setting for restoration in a watershed in NE Spain, based on assessments of soil erosion and ecosystem services

Maintaining and enhancing ecosystem services through the restoration of degraded ecosystems have become an important biodiversity conservation strategy. Deciding where to restore ecosystems for the attainment of multiple services is a key issue for future planning, management, and human well-being. Most restoration projects usually entail a small number of actions in a local area and do not consider the potential benefits of planning restoration at broad regional scales. We developed a hierarchical priority setting approach to evaluate the performance of restoration measures in a semiarid basin in NE Spain (the Martín River Basin, 2,112 km²). Our analysis utilized a combination of erosion (a key driver of degradation in this Mediterranean region) and six spatially explicit ecosystem services data layers (five of these maps plotted surrogates for soil retention and accumulation, water supply and regulation, and carbon storage, and one plotted a cultural service, ecotourism). Hierarchical maps were generated using a geographic information system that combined areas important for providing a bundle of ecosystem services, as state variables, with erosion maps, as the disturbance or regulatory variable. This was performed for multiple scales, thereby identifying the most adequate scale of analysis and establishing a spatial hierarchy of restoration actions based on the combination of the evaluation of erosion rates and the provision of ecosystem services. Our approach provides managers with a straightforward method for determining the spatial distribution of values for a set of ecosystem services in relation to ecological degradation thresholds and for allocating efforts and resources for restoration projects in complex landscapes.     

The analysis of human health risk with a detailed procedure operating in a GIS environment

An approach for quantifying the human health risk caused by industrial sources, which, daily or accidentally, emit dangerous pollutants able to impact on different environmental media, is introduced. The approach is performed by the HHRA-GIS tool which employs an integrated, multimedia, multi-exposure pathways and multi-receptors risk assessment model able to manage all the steps of the analysis in a georeferenced structure. Upper-bound excess lifetime cancer risk and noncarcinogenic hazards are the risk measures, the spatial distribution of which is calculated and mapped on the involved territory, once all the pathways and receptors of the study area are identified. A sensitivity analysis completes the calculations allowing to understand how risk estimates are dependent on variability in the factors contributing to risk. The last part of the paper makes use of a case study concerning a working industrial site to put in evidence in which way the designed tool can help local authorities and policy makers in managing risks and planning remedial and reduction actions. The considered geographical area is a hypothetical territory characterized by residential, agricultural and industrial zones. The presence of two sources of contamination, a municipal waste incinerator (MWI) and a contaminated site, are evaluated by the tool application. Various typologies of receptors have been taken into account, each of them characterized by different anatomical and dietary properties. The achieved results are analyzed, compared with acceptable and background values and alternatives of minor environmental impact calculated.