Simultaneous immobilization of metals and arsenic in acidic polluted soils near a copper smelter in central Chile

Introduction  

Acidic and metal(oid)-rich topsoils resulted after 34 years of continuous operations of a copper smelter in the Puchuncaví valley, central Chile. Currently, large-scale remediation actions for simultaneous in situ immobilization of metals and As are needed to reduce environmental risks of polluted soils. Aided phytostabilization is a cost-effective alternative, but adequate local available soil amendments have to be identified and management options have to be defined.     

Phenol and nitrophenols in the air and dew waters of Santiago de Chile

Phenol, nitrophenols and dinitrophenols were measured in air and dews in downtown Santiago de Chile. In both systems, phenol, 2-nitrophenol (2-NP), and 4-nitrophenol (4-NP) were the compounds found in higher concentrations and with major frequency. Temporal profiles in air were compatible with a significant direct incorporation from mobile sources. The data can be explained in terms of a faster removal of 2-NP than 4-NP, with the former predominating in fresh air masses and 4-NP in more aged samples. All these compounds, as well as dinitrophenols, were found in dew waters. Simultaneous measurements in air and dew indicate that phenol present in dew exceeds that expected in equilibrated samples, while the opposite occurs with 4-NP. This last result is associated to mass transfer limitations for the highly water soluble nitroderivative.     

The development of probabilistic models to estimate accident risk (due to runway overrun and landing undershoot) applicable to the design and construction of runway safety areas

The risks of landing overrun (LDOR – LanDing OverRun), Take-off Overrun (TOOR – Take-Off OverRun) and landing undershoot (LDUS – LanDing UnderShoot) are dependent on multiple factors related to operating conditions. These include wind, runway surface conditions, landing or take-off distances required, the presence of obstacles, runway distance available, the existence and dimensions of runway safety areas.In this paper we propose risk models for runway overrun and landing undershoot, using a probabilistic approach. These models are supported by historical data on accidents in the area around the runway and will enable us to determine if the risk level is acceptable or whether action must be taken to mitigate such risks at a given airport. Furthermore, these models permit comparison of the results of different risk mitigation actions in terms of operational risk and safety.The principal advantage of this method is the high quality results obtained for a limited investment in terms of time, computing power and data. As such the method is extremely practical and easy to apply in aerodrome planning, development and operation.     

Co-treatment of hydrogen sulfide and methanol in a single-stage biotrickling filter under acidic conditions

Biofiltration of waste gases is cost-effective and environment-friendly compared to the conventional techniques for treating large flow rates of gas streams with low concentrations of pollutants. Pulp and paper industry off-gases usually contain reduced sulfur compounds, such as hydrogen sulfide and a wide range of volatile organic compounds (VOCs), e.g., methanol. It is desirable to eliminate both of these groups of compounds. Since the co-treatment of inorganic sulfur compounds and VOCs in biotrickling filters is a relatively unexplored area, the simultaneous biotreatment of H2S and methanol as the model VOC was investigated. The results showed that, after adaptation, the elimination capacity of methanol could reach around 236 g m(-3) h(-1) with the simultaneous complete removal (100%) of 12 ppm H2S when the empty bed residence time is 24 s. The pH of the system was around 2. Methanol removal was hardly affected by the presence of hydrogen sulfide, despite the low pH. Conversely, the presence of the VOC in the waste gas reduced the efficiency of H2S biodegradation. The maximal methanol removal decreased somewhat when increasing the gas flow rate. This is the first report on the degradation of methanol at such low pH in a biotrickling filter and on the co-treatment of H2S and VOCs under such conditions.     

Bioaccumulation of lead, mercury, and cadmium in the greater white-toothed shrew, Crocidura russula, from the Ebro Delta (NE Spain): sex- and age-dependent variation

We quantified bioaccumulation of lead, mercury, and cadmium in bones from 105 greater white-toothed shrews (Crocidura russula) collected at the Ebro Delta, a polluted area, and the Medas Islands, a control site. Lead and mercury levels varied with site, age, and sex, although statistical significances depended on each factor. Globally, shrews from the polluted area exhibited significantly higher concentrations of Pb and Hg. Increment of Pb with age was particularly remarkable in wetland animals and was interpreted in relation to human activities, namely hunting. Unlike males, females from the Ebro Delta maintained low Hg levels, which were associated with gestation and lactation. Cadmium levels did not differ between sites, sexes, or ages. This study provides the first data on heavy metals in mammals from this wetland and suggests that C. russula is a good bioindicator of metal pollution. We concluded that sex and age may represent an important source of variation in the bioaccumulation of these metals in wild populations.     

Integrated catalytic wet air oxidation and aerobic biological treatment in a municipal WWTP of a high-strength o-cresol wastewater

This study examines the feasibility of coupling a Catalytic Wet Air Oxidation (CWAO), with activated carbon (AC) as catalyst, and an aerobic biological treatment to treat a high-strength o-cresol wastewater. Two goals are pursued: (a) To determine the effect of the main AC/CWAO intermediates on the activated sludge of a municipal WasteWater Treatment Plant (WWTP) and (b) To demonstrate the feasibility of coupling the AC/CWAO effluent as a part of the influent of a municipal WWTP. In a previous study, a high-strength o-cresol wastewater was treated by AC/CWAO aiming to establish the distribution of intermediates and the biodegradability enhancement. In this work, the biodegradability, toxicity and inhibition of the most relevant intermediates detected in the AC/CWAO effluent were determined by respirometry. Also, the results of a pilot scale municipal WWTP study for an integrated AC/CWAO-aerobic biological treatment of this effluent are presented. The biodegradation parameters (i.e. maximum oxygen uptake rate and oxygen consumption) of main AC/CWAO intermediates allowed the classification of the intermediates into readily biodegradable, inert or toxic/inhibitory compounds. This detailed study, allowed to understand the biodegradability enhancement exhibited by an AC/CWAO effluent and to achieve a successful strategy for coupling the AC/CWAO step with an aerobic biological treatment for a high-strength o-cresol wastewater. Using 30%, as COD, of AC/CWAO effluent in the inlet to the pilot scale WWTP, the integrated AC/CWAO-biological treatment achieved a 98% of total COD removal and, particularly, a 91% of AC/CWAO effluent COD removal without any undesirable effect on the biomass.     

Heterozygosity‐Fitness Correlations and Inbreeding Depression in Two Critically Endangered Mammals

The relation among inbreeding, heterozygosity, and fitness has been studied primarily among outbred populations, and little is known about these phenomena in endangered populations. Most researchers conclude that the relation between coefficient of inbreeding estimated from pedigrees and fitness traits (inbreeding‐fitness correlations) better reflects inbreeding depression than the relation between marker heterozygosity and fitness traits (heterozygosity‐fitness correlations). However, it has been suggested recently that heterozygosity‐fitness correlations should only be expected when inbreeding generates extensive identity disequilibrium (correlations in heterozygosity and homozygosity across loci throughout the genome). We tested this hypothesis in Mohor gazelle (Gazella dama mhorr) and Iberian lynx (Lynx pardinus). For Mohor gazelle, we calculated the inbreeding coefficient and measured heterozygosity at 17 microsatellite loci. For Iberian lynx, we measured heterozygosity at 36 microsatellite loci. In both species we estimated semen quality, a phenotypic trait directly related to fitness that is controlled by many loci and is affected by inbreeding depression. Both species showed evidence of extensive identity disequilibrium, and in both species heterozygosity was associated with semen quality. In the Iberian lynx the low proportion of normal sperm associated with low levels of heterozygosity was so extreme that it is likely to limit the fertility of males. In Mohor gazelle, although heterozygosity was associated with semen quality, inbreeding coefficient was not. This result suggests that when coefficient of inbreeding is calculated on the basis of a genealogy that begins after a long history of inbreeding, the coefficient of inbreeding fails to capture previous demographic information because it is a poor estimator of accumulated individual inbreeding. We conclude that among highly endangered species with extensive identity disequilibrium, examination of heterozygosity‐fitness correlations may be an effective way to detect inbreeding depression, whereas inbreeding‐fitness correlations may be poor indicators of inbreeding depression if the pedigree does not accurately reflect the history of inbreeding. Correlaciones Heterocigosidad‐ Adaptabilidad y Depresión Endogámica en Dos Especies de Mamíferos Críticamente en Peligro     

Adsorption of chloridazon from aqueous solution on modified kerolite-rich materials

The adsorption of chloridazon (5-amine-4-chloro-2-phenylpyridazin-3(2H)-one) on kerolite samples heated at 110 degrees C (K-110), 200 degrees C (K-200), 400 degrees C (K-400), 600 degrees C (K-600) and acid-treated with H(2)SO(4) solutions of two different concentrations (0.25 and 0.5 M) (K-0.25 and K-0.5, respectively) from pure water at 25 degrees C has been studied by using batch and column experiments. The adsorption experimental data points were fitted to the Freundlich equation in order to calculate the adsorption capacities (K(f)) of the samples; K(f) values ranged from 184.7 mg kg(-1) (K-0.5) up to 2253 mg kg(-1) (K-600). This indicated that the heat treatment given to the kerolite greatly increases its adsorption capacity for the herbicide whereas the acid treatment produces a clear decrease in the amount of chloridazon adsorbed. The removal efficiency (R) was also calculated; R values ranging from 52.8% (K-0.5) up to 88.3% (K-600). Thus, the results showed that the 600 degrees C heat-treated kerolite was more effective in relation to adsorption of chloridazon and it might be reasonably used in removing this herbicide from water.     

Mineralization of the biocide chloroxylenol by electrochemical advanced oxidation processes

Electrochemical advanced oxidation processes (EAOPs) are environmentally friendly methods based on the destruction of organic pollutants in wastewaters with in situ electrogenerated hydroxyl radical. This species is formed in anodic oxidation (AO) from water oxidation at the anode and in indirect electro-oxidation methods like electro-Fenton (EF) and photoelectro-Fenton (PEF) also from reaction between catalytic Fe2+ and H2O2 continuously produced at the O2-diffusion cathode. The PEF method involves the irradiation of the treated solution with UVA light to enhance the photolysis of organics including Fe(III) complexes. In this work, the oxidation power of such EAOPs to decontaminate synthetic wastewaters of the biocide chloroxylenol (4-chloro-3,5-dimethylphenol) at pH 3.0 is comparatively examined with an undivided electrolytic cell containing a Pt or boron-doped diamond (BDD) anode and a stainless steel or O2-diffusion cathode. The initial chlorine is released as Cl(-) ion, which remains stable in the medium using Pt or is oxidized to Cl2 on BDD. The biocide solutions can be completely decontaminated using AO with a BDD anode, as well as PEF with a Pt or BDD anode. The PEF procedure with a BDD anode is the most powerful method leading to total mineralization in about 300 min, practically independent of current density. When current density rises, the degradation rate of processes increases, but they become less efficient due to the larger enhancement of waste reactions of oxidants. Chloroxylenol is much more rapidly removed in EF and PEF than in AO. 2,6-dimethylhydroquinone, 2,6-dimethyl-p-benzoquinone and 3,5-dimethyl-2-hydroxy-p-benzoquinone are identified as aromatic by-products, and maleic, malonic, pyruvic, acetic and oxalic acids are found as generated carboxylic acids. A general pathway for chloroxylenol mineralization by all EAOPs including the above by-products is proposed.