Analysis of polycyclic aromatic hydrocarbons (PAHs) in airborne particles by direct sample introduction thermal desorption GC/MS

The technique of thermal desorption (TD)–GC/MS was evaluated for measuring airborne, 4–6 ring polycyclic aromatic hydrocarbons (PAHs) collected onto quartz filters. TD provides a more readily automated and sensitive alternative to traditional solvent extraction, decreasing the time/cost of analysis and reducing the risk of analyte loss or sample contamination. The developed method was successfully applied to the analysis of PAH standard solutions loaded on sorbent tubes packed with quartz wool and the graphitized carbon black sorbent Carbograph2. The optimized method showed high desorption efficiency over the whole range of target PAHs with good precision, linearity and sensitivity. The proposed method was verified on an urban dust Standard Reference Material (SRM 1649a); the experimentally determined concentrations agreed with the certified ranges (95% confidence limit) for all target compounds except benzo[a]anthracene, which fell just outside the narrow certified range. The desorption efficiency and the reproducibility of the method was evaluated by analysing pieces of real sample filters sampled from urban air for a period of 24 h. The results confirmed the homogeneity of the filter and showed high recovery efficiencies for all target PAHs.     

Root penetration through sealing layers at mine deposit sites.

To prevent acid mine drainage arising from oxygen and water penetration of sulphide-rich mine tailings, the tailings are covered with layers of dry sealing material. Plant roots have a great ability to penetrate dense materials, and if the roots are able to penetrate the sealing layer of a tailings deposit, its oxygen-shielding properties could be reduced. The objective of this study was to evaluate whether plant roots are able to penetrate sealing layers covering mine tailings deposits. Root penetration into layers of various sealing materials, such as clayey moraine (clay, 8-10%; silt, 22-37%; sand, 37-55%; gravel, 15-18%), moraine (unspecified), 6-mm bentonite (kaolin clay) fabric, lime and clay, Cefyll (mixture of pulverized coal fly ash, cement and water) and a mixture containing biosludge (30-35%) and bioashes (65-70%), was investigated. In the field, roots were studied by digging trenches alongside vegetation growing in 3- and 10-year-old mine sites. In the greenhouse root growth of Betula pendula, Pinus sylvestris, Poa pratensis and Salix viminalis were studied in compartments where the plants had been growing for 22 months. The results from the field experiment indicated that roots are able to penetrate both deep down in the cover layer (1.7 m) and also into the sealing layers of various materials, and even to penetrate hard Cefyll. The addition of nutrients in the top cover reduced deep root growth and thereby also penetration through the sealing layer. Low hydraulic conductivity of the sealing layer or a thick cover layer had less effect on root penetration. In the greenhouse experiment roots did not penetrate the thin bentonite fabric, due to low pH (2.1-2.7) that was created from the underlying weathered mine tailings. The clayey moraine was penetrated by all species used in the greenhouse experiment; Pinus sylvestris had the greatest ability to penetrate. To prevent root penetration of the other sealing layer, a suitable condition for the plants should be created in the upper part of the cover layer, namely a sufficient amount of plant nutrients. However, to define such a condition is difficult since different plant species have different requirements.     

The Moderating Role of Hardiness and Social Support in the Relation Between Job Stressors and Well-Being. A Lesson From a Clerical Women Sample

The study concerns the moderating role of two variables—hardiness and social support—in the relation between job stressors and well-being. It was checked if there is a connection between hardiness and social support, and if these variables are directly related to the level of well-being. It was also hypothesized that hardiness and social support buffer the negative influence of stressors on well-being. The fact that social support and well-being are multidimensional variables was taken into account.

The cross-sectional study was conducted on a group of 200 women employed as office workers. The results showed that hardiness correlates with the indexes of emotional support as well as practical support coming from supervisors. The connection, however, was not strong. Hardiness and social support were directly connected with the level of well-being. Interaction of these two independent variables played a marginal role. As far as the buffering role of these variables was concerned, the results have shown that hardiness did not play a buffering role and social support did to a limited degree only.

The results of the study proved that it is justifiable to treat social support and well-being as multidimensional variables.     

Synergy Between Visual and Auditory Signals and Its Influence on the Follow-Up Regulation Quality

The study aimed at verifying a hypothesis that supporting a visual signal of regulation deviation with an auditory one could improve the quality of regulation; the operator would have better information on machine operation. A special simulator was applied to follow-up tracking with a manual lever which controlled vertical movements of a cursor on a monitor screen. Simultaneously with visual information on screen, the operator was provided with an auditory deviation signal of pre-determined characteristics. 33 young males underwent the test. It was found that supporting a visual signal with an auditory one resulted in an improvement in the regulation quality by 5-6%, which proved synergy between those signals. The results may be used in designing tele- and servo-mechanisms, especially for remote control machinery, e.g., inspection robots or micromanipulators controlled by operators in a follow-up system.     

Electric Versus Hydraulic Hospital Beds: Differences in Use During Basic Nursing Tasks

Biomechanical, postural and ergonomic aspects during real patient-assisting tasks performed by nurses using an electric versus a hydraulic hospital bed were observed. While there were no differences in the flexed postures the nurses adopted, longer performance times were recorded when electric beds were used. Subjective effort, force exertion and lumbar shear forces exceeding safety limits proved electric beds were superior. Patients’ dependency level seemed to influence the type of nurses’ intervention (duration and force actions), irrespective of the bed used. The nurses greatly appreciated the electric bed. Its use seemed to reduce the level of effort perceived during care giving and the postural load during critical subtasks. Ergonomics and organizational problems related to adopting electric beds in hospital wards should be addressed further to make their use more efficient.     

Integrating major accidents hazard into occupational risk assessment: An index approach

Major Accident Hazard (MAH) and Occupational Safety and Health (OSH) are two separated topics in both industrial practice and legislation; recently, interest is increasing toward an integrated risk assessment mainly forced by the tendency to a more efficient safety management system. The present study proposes a semi-quantitative approach to integrate MAH in OSH risk assessment. The two risk types are characterized by opposite features: the OSH analysis is usually task-based and focused on job profiles, while the MAH analysis is space-based and focused on plant characteristics. The basic idea of the proposed approach is to merge spatial information and job profile features in order to improve OSH assessment; thus, a risk index derived by the recent standard ISO 12100 (2010) has been adapted. In detail, the proposed index combines exposure times of each worker at each plant unit – derived from the OSH analysis – with damage areas derived from MAH analysis allowing a quantitative assessment of the MAH risk level for each individual job profile. The model has been tested in a large petrochemical plant; several hypotheses have been developed in order to validate the model. Results have showed the potentiality of the proposed approach in providing a common and coherent representation of both MAH and OSH risks, according to job profiles and plant units.     

Assessment of the Streptomyces-plant system to mitigate the impact of Cr(VI) and lindane in experimental soils

Environmental Science and Pollution Research - Phytoremediation techniques have been proposed as ecological methods to clean up contaminated sites. This study is aimed to evaluate the effect of the...     

Spatiotemporal evolution of soil pH and zinc after the Aznalcollar mine spill

The residual pollution after the Aznalcóllar (southwestern Spain) pyrite mine spill is still a threat due to the continuing oxidation of sulfuric minerals. The objective of this paper was to analyze the combined effect of pyrite oxidation, sugar beet foam applications, and meteorological conditions on the spatiotemporal evolution of the pH and EDTA-extractable Zn concentration, using non co-located data from 11 sampling dates between June 1999 and March 2002. Median pH values ranged from 4.4 at the beginning of the monitoring period to 7.6 at the end, although values near 2.5 were observed throughout the entire period, despite of two sugar beet foam (SBF) applications. Zinc distributions were positively skewed and median concentrations ranged from 17 to 94 mg kg(-1). The inverse relationship between pH and Zn became weaker toward the end of the monitoring period as a consequence of the precipitation and posterior dissolution of newly formed minerals from the reaction products of the pyrite oxidation. Normal score maps showed that after the SBF applications only 0.5% of the monitored area was below the pH = 4 threshold, while on other dates up to one-third of the area remained below this value. The better performance of the second SBF application could be explained in terms of pyrite oxidation pathways and environmental conditions. From this analysis, with data obtained under uncontrolled field conditions, it is concluded that SBF should be applied before or during the wet and cold season to alleviate acidification, caused by the oxidation of pyrite or other sulfuric minerals.     

Larvicidal and pupicidal activities of eco-friendly phenolic lipid products from Anacardium occidentale nutshell against arbovirus vectors

Environmental Science and Pollution Research - Aedes aegypti and Culex quinquefasciatus are vectors of diseases that constitute public health problems. The discovery of products capable of...