Comparative effect of organic amendments on physio-biochemical traits of young and old bean leaves grown under cadmium stress: a multivariate analysis

Environmental Science and Pollution Research - The current study investigated the influence of organic amendments on cadmium (Cd) uptake and its effects on biochemical attributes of young and old...     

Toxic and genotoxic impact of fibrates and their photoproducts on non-target organisms

Lipid regulators have been detected in effluents from sewage treatment plants and surface waters from humans via excretion. This study was designed to assess the ecotoxicity of fibrates, lipid regulating agents. The following compounds were investigated: Bezafibrate, Fenofibrate and Gemfibrozil and their derivatives obtained by solar simulator irradiation. Bioassays were performed on bacteria, algae, rotifers and microcrustaceans to assess acute and chronic toxicity, while SOS Chromotest and Ames test were utilized to detect the genotoxic potential of the investigated compounds. The photoproducts were identified by their physical features and for the first risk evaluation, the environmental impact of parental compounds was calculated by Measured Environmental Concentrations (MEC) using the available data from the literature regarding drug occurrence in the aquatic environment and the Predicted No Effect Concentrations (PNEC) based on our toxicity data. The results showed that acute toxicity was in the order of dozens of mg/L for all the trophic levels utilized in bioassays (bacteria, rotifers, crustaceans). Chronic exposure to these compounds caused inhibition of growth population on rotifers and crustaceans while the algae seemed to be slightly affected by this class of pharmaceuticals. Genotoxic and mutagenic effects were especially found for the Gemfibrozil photoproduct suggesting that also byproducts have to be considered in the environmental risk of drugs.     

Validity and reliability of a job factors questionnaire related to the work tasks of physical therapists

Physical therapists engage in work tasks that expose them to occupational risk factors related to musculoskeletal disorders. Due to the gap in the literature on instruments focused on those workers, this study adapted a job factors questionnaire to physical therapists, and assessed its psychometric properties. The questionnaire was adapted and its content validity was established. The psychometric properties were evaluated among 142 physical therapists. Reliability was verified using the temporal-stability design and internal consistency. Construct validity was assessed with the known-groups technique. Test-retest results demonstrated intraclass correlation coefficients between .82 and .90 (p < .001). Cronbach's α of .91 verified the reliability of the questionnaire. The known-groups technique demonstrated a statistically significant difference on the scores of the items when physical therapists were compared to office workers. The results indicated that the adapted questionnaire had acceptable psychometric properties for assessing problematic job factors among physical therapists working in hospitals.     

Determination of selected fate and aquatic toxicity characteristics of acrylic acid and a series of acrylic esters

Acrylic acid, methyl acrylate, ethyl acrylate, and butyl acrylate are commercially important and widely used materials. This paper reports the results of a series of fate and aquatic toxicity studies. The mobility in soil of acrylic acid and its esters ranged from 'medium' to 'very high'. Calculated bioconcentration factors ranged from 1 to 37, suggesting a low bioconcentration potential. Acrylic acid and methyl acrylate showed limited biodegradability in the five day biochemical oxygen demand (BOD5) test, while ethyl acrylate and butyl acrylate were degraded easily (77% and 56%, respectively). Using the OECD method 301D 28-d closed bottle test, degradability for acrylic acid was 81% at 28 days, while the acrylic esters ranged from 57% to 60%. Acrylic acid degraded rapidly to carbon dioxide in soil (t1/2 < 1 day). Toxicity tests were conducted using freshwater and marine fish, invertebrates, and algae. Acrylic acid effect concentrations for fish and invertebrates ranged from 27 to 236 mg/l. Effect concentrations (LC50 or EC50) for fish and invertebrates using methyl acrylate, ethyl acrylate, and butyl acrylate ranged from 1.1 to 8.2 mg/l. The chronic MATC for acrylic acid with Daphnia magna was 27 mg/l based on length and young produced per adult reproduction day and for ethyl acrylate was 0.29 mg/l based on both the reproductive and growth endpoints. Overall these studies show that acrylic acid and the acrylic esters studied can rapidly biodegrade, have a low potential for persistence or bioaccumulation in the environment, and have low to moderate toxicity.     

Probability distributions of arsenic in soil from brownfield sites in Beijing (China): statistical characterization of the background populations and implications for site assessment studies

A probabilistic analysis was performed on soil arsenic concentration data from 4 brownfield sites at Beijing (Chaoyang and Haidian Districts), involved in environmental assessment studies. The available data sets were processed to provide a statistical characterization of the background populations and differentiate “anomalous data” from the natural range of variation of arsenic concentrations in soil. The site-specific background distributions and the existing wide-scale background values defined for the Beijing area were compared, discussing related implications for the definition of metal contamination soil screening levels (SSLs) in site assessment studies. The statistical analysis of As data sets discriminated site-specific background populations, encompassing 88% to 94% of the sample data, from outliers values, associated with either subsoil natural enrichments or possible anthropogenic releases. Upper Baseline Concentration (UBC) limits (+ 2σ level), including most of the site-specific metal background variability, were derived based on the statistical characterization of the background populations. Sites in the Chaoyang South District area had UBC values in the range 10.4–12.6 mg·kg^-1. These ranges provide meaningful SSL values to be adopted for As in local site assessment studies. Using the wide-scale background value for the Beijing area would have erroneously classified most of the areas in the subject sites as potentially contaminated.     

Complex performance of novel CoNiMnB electrodeposits in alkaline borohydride solutions

The complex performance of newly synthesized CoNiMnB electrodeposits in base-stabilized sodium borohydride solutions was examined. The rate of hydrogen generation due to borohydride hydrolysis was determined at different temperatures. Activation energy of approximately 33 kJ/mol was estimated, which is lower than the values reported for other catalysts. At electrochemical conditions, there is a competition between borohydride hydrolysis and electrooxidation reactions. The electrooxidation of borohydride takes place with low overpotentials at relatively high current densities. The long-term discharge at galvanostatic conditions as well as possibilities for partial storage of generated hydrogen indicates potentials for application of studied electrodeposits as anode material in direct borohydride fuel cells (DBFC).     

N-nitrosodimethylamine and trihalomethane formation and minimisation in Southeast Queensland drinking water

This study assesses the prevalence of disinfection by-product (DBP) precursors in some Southeast Queensland drinking water sources by conducting formation potential experiments for the four regulated trihalomethanes (THMs), and the potent carcinogen, N-nitrosodimethylamine (NDMA). NDMA formation potentials were consistently low (<5-21 ng/L), and total THM (tTHM) formation potentials were consistently below the Australian Drinking Water Guideline (250 μg/L). NDMA concentration of finished drinking waters was also monitored and found to be <5 ng/L in all cases. The effect of coagulation and advanced oxidation on the formation of NDMA and THMs is also reported. UV/H(2)O(2) pre-treatment was effective in producing water with very low THMs concentrations, and UV irradiation was an effective method for NDMA degradation. H(2)O(2) was not required for the observed NDMA degradation to occur. Coagulation using alum, ferric chloride or poly(diallyldimethylammonium chloride) (polyDADMAC) was ineffective in removing DBPs precursors from the source water studied, irrespective of the low dissolved organic carbon (DOC) and dissolved organic nitrogen (DON) attained. Rather, coagulation with polyDADMAC caused an increase in NDMA formation potential upon chloramination, and all coagulants led to an increased tTHM formation potential upon chlorination due to the high bromide concentration of the source water studied.     

Design,Modelling and Assessment of Emission Scenarios Resulting from a Network of Wood Biomass Boilers

The use of wood biomass as a fuel for domestic and industrial heating systems allows for a reduction of CO₂ emissions at a global scale, but it may also result in worse local air quality conditions, due to their emissions of particulate matter. The aim of this study is to assess the actual trend of atmospheric pollution in a study area, assuming that all heating systems are replaced by small size biomass boilers linked to the buildings through district heating network. Ground level concentrations of particulate matter, emitted by different heating systems, are therefore evaluated through numerical simulations performed by means of an atmospheric dispersion model (Sirane). As a first step, we have compared the environmental impact of a woodchip boilers network with that given by the use of traditional heating systems, i.e. wood stoves and natural gas boilers. As a second step, we have analysed the impact of such a network taking into account different emission scenarios, related to different boilers operating conditions. Results show that the environmental performances of a woodchip boilers network can be optimized by combining it with other renewable sources of energy devoted to the supply of hot water. The adopted analysis methodology can be applied to other real or hypothetic punctual sources on the territory.     

Radioactive Isotopes of Strontium, Caesium and Plutonium in Sediments of the Northern Adriatic Sea

Sediment samples of different strata (0-3 and 12-15 cm) were collected between 1990 and 1992 during seasonal cruises in the Northern Adriatic Sea. A complete mapping of the Sr-90, Cs-137, Pu-238 and Pu-239(240) concentrations was obtained for samples covering a wide area, stretching from the Gulf of Trieste towards the Ancona shoreline. Sr-90 concentrations varied between 1.5 and 6.5 Bq kg^-1 dw, Cs-137 was in the range 0.9-38.9 Bq kg^-1 dw, Pu-239(240) in the range 0.08-1.5 Bq kg^-1 dw and Pu-238 around 0.03 Bq kg^-1 dw. Special reference was also put on the comparison between the off-shore environment and data obtained from samples collected inside the Po river delta. in spite of the major accumulation of Cs-137 inside the estuarine environment, higher concentrations of strontium and plutonium isotopes were detected in the offshore environment.