Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Egg production and hatching success in North Adriatic Sea populations of the copepod acartia clausi

Egg production, fecal pellet production and hatching success are reported for Acartia clausi females sampled during three cruises in February 1997, 1998 and June 1997 at 20-24 stations along 4 transects in the North Adriatic Sea. Dramatically low hatching rates were recorded during both diatom bloom events in February as opposed to much higher rates during post-bloom conditions in June, even though A. clausi productivity during the bloom was apparently high. These results are discussed in the light of recent findings on the negative impact of diatoms on copepod reproductive potential.     

Zearalenone screening of human breast milk from the Naples area

The mycotoxin zearalenone exhibits estrogenic and anabolic properties in several animal species, humans included. Food contamination by zearalenone is caused either by direct contamination of grains, fruits, and their based-products or by “carry-over” of mycotoxins in animal tissues, milk, and eggs after intake of contaminated feedstuff. Now, a survey on zearalenone contamination in breast milk of healthy primiparous women living in the Naples countryside was conducted. From 47 healthy primiparous women, breast milk samples were collected within the first six weeks after delivery as well as clinical data of mother–newborn pairs. Breast milk analyses were performed with both competitive indirect enzyme-linked immunosorbent assay and high-performance liquid chromatography with fluorescence detection. At 36.9 ± 2.6 days after vaginal delivery, the mean zearalenone contents of the breast milk samples were 1.13 ± 0.34 µg/L. The zearalenone levels correlated with both mother weights before pregnancy (r = ?0.506; P < 0.001) and at delivery (r = ?0.351; P < 0.05). The present results indicate that breast milk may be contaminated with zearalenone.     

Assessment of herbaceous plant habitats in water-constrained environments: predicting indirect effects with fuzzy logic

Herbaceous plant production plays a key role in determining the function of rangeland ecosystems in the semi-arid and Mediterranean regions. Therefore, assessment of herbaceous plant habitats is important for understanding the ecosystem functioning in these regions and for applied purposes, such as range management and land evaluation. This paper presents a model to assess herbaceous plant habitats in a basaltic stony environment in a Mediterranean region. The model is based on geographic information systems (GIS), remote sensing and fuzzy logic, while four indirect variables, which represent major characteristics of herbaceous habitats, are modeled: rock cover fraction; wetness index (WI); soil depth; and slope orientation (aspect). A linear unmixing model was used to measure rock cover on a per pixel basis using a Landsat TM summer image. The wetness index and local aspect were determined from digital elevation data with 25 m × 25 m pixel resolution, while soil data were gathered in a field survey. The modeling approach adopted here is process-based and assumes that water availability plays a crucial role in determining herbaceous plant production in Mediterranean and semi-arid environments. The model rules are based on fuzzy logic and are written based on the hypothesized water requirements of the herbaceous vegetation. The results show that on a polygon basis there is positive agreement between the model proposed here and previous mapping of the herbaceous habitats carried out in the field using traditional methods. Intrapolygon tests show that the use of a continuous raster data model and fuzzy logic principles provide an added value to traditional mapping. Moreover, herbaceous biomass measurements at two time intervals—mid- and peak winter season—corresponded with the habitat assessment predictions achieved using a new scenario that is proposed in this research. This scenario suggests that rockiness increases herbaceous production on south-facing slopes, while in other slope aspects the rock cover has lower impact on herbaceous growth. Due to its simplicity, the model suggested here can be used by planners and managers, to adjust range activities over large areas. The process-based approach should allow adaptation of the model to other regions more effectively than models that were formulated on a purely empirical basis. The model could also be used to study the relationship between water availability and ecosystem productivity on a regional scale.     

Material and energy recovery in integrated waste management systems. An evaluation based on life cycle assessment

This paper reports the environmental results, integrated with those arising from mass and energy balances, of a research project on the comparative analysis of strategies for material and energy recovery from waste, funded by the Italian Ministry of Education, University and Research. The project, involving the cooperation of five University research groups, was devoted to the optimisation of material and energy recovery activities within integrated municipal solid waste (MSW) management systems. Four scenarios of separate collection (overall value of 35%, 50% without the collection of food waste, 50% including the collection of food waste, 65%) were defined for the implementation of energetic, environmental and economic balances. Two sizes of integrated MSW management system (IWMS) were considered: a metropolitan area, with a gross MSW production of 750,000 t/year and an average province, with a gross MSW production of 150,000 t/year. The environmental analysis was conducted using Life Cycle Assessment methodology (LCA), for both material and energy recovery activities. In order to avoid allocation we have used the technique of the expansion of the system boundaries. This means taking into consideration the impact on the environment related to the waste management activities in comparison with the avoided impacts related to the saving of raw materials and primary energy. Under the hypotheses of the study, both for the large and for the small IWMS, the energetic and environmental benefits are higher than the energetic and environmental impacts for all the scenarios analysed in terms of all the indicators considered: the scenario with 50% separate collection in a drop-off scheme excluding food waste shows the most promising perspectives, mainly arising from the highest collection (and recycling) of all the packaging materials, which is the activity giving the biggest energetic and environmental benefits. Main conclusions of the study in the general field of the assessment of the environmental performance of any integrated waste management scheme address the importance of properly defining, beyond the design value assumed for the separate collection as a whole, also the yields of each material recovered; particular significance is finally related to the amount of residues deriving from material recovery activities, resulting on average in the order of 20% of the collected materials.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.     

Complex performance of novel CoNiMnB electrodeposits in alkaline borohydride solutions

The complex performance of newly synthesized CoNiMnB electrodeposits in base-stabilized sodium borohydride solutions was examined. The rate of hydrogen generation due to borohydride hydrolysis was determined at different temperatures. Activation energy of approximately 33 kJ/mol was estimated, which is lower than the values reported for other catalysts. At electrochemical conditions, there is a competition between borohydride hydrolysis and electrooxidation reactions. The electrooxidation of borohydride takes place with low overpotentials at relatively high current densities. The long-term discharge at galvanostatic conditions as well as possibilities for partial storage of generated hydrogen indicates potentials for application of studied electrodeposits as anode material in direct borohydride fuel cells (DBFC).     

Long-Term Changes in Game Species Over a Long Period of Transformation in the Iberian Mediterranean Landscape

Agricultural change has transformed large areas of traditional farming landscapes, leading to important changes in the species community assemblages in most European countries. We suspect that the drastic changes in land-use that have occurred in Andalusia (southern Spain) over recent decades, may have affected the distribution and abundance of game species in this region. This article compares the distribution of the main game species in Andalusia during the 1960s and 1990s, using data from maps available from the Mainland Spanish Fish, Game and National Parks Service and from recent datasets on hunting yield distributions, respectively. Big-game and small-game species were significantly segregated in southern Spain during the 1990s, as two clearly independent chorotypes (groups of species whose abundances are similarly distributed) were obtained from the classification analysis. In contrast, big-game and small-game species were not significantly segregated several decades ago, when there was only one chorotype consisting of small-game species and wild boar. The other three ungulates did not constitute a significant chorotype, as they showed positive correlations with some species in the group mentioned above. These changes seem to be a consequence of the transformations that have occurred in the Iberian Mediterranean landscape over the last few decades. The abandoning of traditional activities, and the consequent formation of dense scrubland and woodland, has led to an expansion of big-game species, and a decrease of small-game species in mountain areas. Moreover, agricultural intensification has apparently depleted small-game species populations in some agricultural areas. On the other hand, the increasingly intensive hunting management could be artificially boosting this segregation between small-game and big-game species. Our results suggest that the conservation and regeneration of traditional agricultural landscapes (like those predominating in the 1960s) should be a priority for the conservation of small-game species.     

The presence of vanadium in groundwater of southeastern extreme the pampean region Argentina Relationship with other chemical elements

Changes in the quality of groundwater resources are related to the presence and concentration of contaminants, especially trace elements such as arsenic, boron, fluoride and vanadium. Vanadium is a rare element naturally abundant, generally found in combination with other elements. Vanadium pentoxide is known to have aneugenic effects. Thus, a study was carried out to assess the presence of vanadium in the groundwater of the southeastern pampean region of Argentina, which constitutes the main water supply for the local population. Statistical and correlational analyses were applied to identify possible interrelationships between vanadium and another chemical elements. Vanadium was found in all groundwater samples. The minimum and maximum vanadium concentrations found were 0.05 mg/l and 2.47 mg/l, respectively. Vanadium is significantly correlated with other trace elements such as arsenic, fluoride and boron. The interrelationship between vanadium and the presence of volcanic glass in sediments is not significant as expected.     

High efficiencies in the electrochemical oxidation of an anthraquinonic dye with conductive-diamond anodes

Oxidation of anthraquinonic dye Acid Blue 62 by electrolysis with conductive-diamond electrodes is studied in this work. COD, TOC, and color have been selected to monitor the degradation of the molecule as a function of several operating inputs (current density, pH, temperature, and NaCl concentration). Results show that the electrochemical oxidation of this model of large molecules follows a first order kinetics in all the conditions assessed, and it does not depend on the pH and temperature. The occurrence of chloride ions in wastewaters increases the rate of color and COD removal as a consequence of the mediated oxidation promoted by the chlorinated oxidizing species. However, chloride occurrence does not have an influence on the mineralization rate. First-order kinetic-constants for color depletion (attack to chromophores groups), oxidation (COD removal), and mineralization (TOC removal) were found to depend on the current density and to increase significantly with its value. A single model was proposed to explain these changes in terms of the mediated oxidation processes. Rate of mineralization remained very close to that expected for a purely mass transfer-controlled process. This was explained assuming that mediated oxidation does not have a significant influence on the mineralization in spite it has some effect on intermediate oxidation stages. The efficiency of the oxidation was found to depend mainly on the concentration of COD being negligible the effect of the other inputs assessed except for the occurrence of chloride ions. Opposite, the efficiency of mineralization depends on concentration of TOC and current density and it did not depend on the chloride occurrence. This observation was found to have an important influence on the power required to remove a given percentage of the initial TOC or COD. To decrease COD efficiently, the occurrence of chloride in the solution is very important, while to remove TOC efficiently, it is more important to work at low current densities and chloride effect is negligible. Energy consumption could be decreased by folds using the proper conditions.