Heavy metal accumulation, heat shock protein expression and cytogenetic changes in Tetrix tenuicornis (L.) (Tetrigidae, Orthoptera) from polluted areas

The orthopteran insect Tetrix tenuicornis, collected from polluted and unpolluted areas, was used to study heavy metal accumulation and its impact on stress protein levels and on changes in the number and morphology of chromosomes in mitotic and meiotic cells. During two consecutive years, insects were collected from polluted areas of zinc-lead mine spoils near Boles?aw (Poland) and from unpolluted areas near Busko and Staszów (Poland). T. tenuicornis from the polluted area showed 1.5, 4.03, 4.32 and 41.73 times higher concentrations of copper (Cu), zinc (Zn), lead (Pb) and cadmium (Cd), respectively, than insects of the same species collected from unpolluted areas. Insects exposed to heavy metals showed only small changes, and rather a decrease in the concentration of constitutive and inducible heat shock proteins Hsp70, the level of which increases under stress conditions. A cytogenetic study of T. tenuicornis revealed intra-population anomalies in chromosome number and morphology in mitotic and meiotic cells and the presence of an additional B chromosome in germinal cells. In 50% of females collected from polluted areas, mosaic oogonial mitotic chromosome sets and diploid, hypo- or hypertetraploid, tetraploid, and octoploid chromosome numbers were detected. In turn, 14.6% of males showed a heterozygous deficiency of chromatin in L2 and M3 bivalents in addition to the presence of B chromosomes.     

Simultaneous removal of NOx,SO2, and Hg from flue gas in FGD absorber with oxidant injection (NaClO2)– full-scale investigation

ABSTRACT

This article presents the results of an industrial-scale study (on 400 MW_e lignite fired unit) of simultaneous NO_x, SO₂, and Hg^T removal in FGD absorber with oxidant injection (NaClO₂) into flue gas. It was confirmed that the injection of sodium chlorite upstream the FGD (Flue Gas Desulfurization) absorber oxidize NO to NO₂, Hg⁰ to Hg²⁺, and enhancing NO_x and Hg^T removal efficiency from exhaust gas in FGD absorber. Mercury removal efficiency grows with the rise of degree of oxidation NO to NO₂ and was limited by the phenomenon of re-emission. For NO_x removal the most critical parameters is slurry pH and temperature. There was no negative effect on sulfur dioxide removal efficiency caused by oxidant injection in tested FGD absorber. Based on the data provided, NO_x and Hg^T emissions can be reduced by adjusting the FGD absorber operating parameters combined with oxidant injection.     

Limited scope for reproductive senescence in wild populations of a short-lived fish

Senescence in wild populations was long considered negligible but current evidence suggests that it is widespread in natural populations of mammals and birds, affecting the survival and reproductive output of older individuals. In contrast, little is known about reproductive senescence in species with asymptotic growth that can keep increasing their reproductive output as they grow older and larger. Using a cross-sectional study, we tested age-related decline in fecundity and relative allocation to reproduction in five wild populations of an annual killifish, Nothobranchius furzeri (Cyprinodontiformes). We did not detect any decline in absolute female egg production over their short lifespan in the wild. Relative fecundity (egg production controlled for female body mass) tended to decrease with age. This effect was driven primarily by a single population that survived 17 weeks, almost twice as long as the median persistence of the other four study populations. There was no decrease in relative ovary mass while in males, relative testes mass actually increased with age. Intra-population variation in relative ovary mass increased in older females suggesting heterogeneity in individual trajectories of female reproductive allocation. Overall, we demonstrate that annual killifish do not experience significant age-related decline in reproductive functions during their very short lifespan in the wild despite the marked deterioration of gonad tissue detected in captivity.     

Impact assessment of climate policy on Poland's power sector

This article addresses the impact of the European Union Emissions Trading System (EU ETS) on Poland’s conventional energy sector in 2008–2020 and further till 2050. Poland is a country with over 80% dependence on coal in the power sector being under political pressure of the European Union’s (EU) ambitious climate policy. The impact of the increase of the European Emission Allowance (EUA) price on fossil fuel power sector has been modelled for different scenarios. The innovation of this article consists in proposing a methodology of estimation actual costs and benefits of power stations in a country with a heavily coal-dependent power sector in the process of transition to a low-carbon economy. Strong political and economic interdependence of coal and power sector has been demonstrated as well as the impact caused by the EU ETS participation in different technology groups of power plants. It has been shown that gas-fuelled combined heat and power units are less vulnerable to the EU ETS-related costs, whereas the hard coal-fired plants may lose their profitability soon after 2020. Lignite power plants, despite their high emissivity, may longer remain in operation owing to low operational costs. Additionally, the results of long-term, up to 2050, modelling of Poland’s energy sector supported an unavoidable need of deep decarbonisation of the power sector to meet the post-Paris climate objectives. It has been concluded that investing in coal-based power capacity may lead to a carbon lock-in of the power sector. Finally, the overall costs of such a transformation have been discussed and confronted with the financial support offered by the EU. The whole consideration has been made in a wide context of changes ongoing globally in energy markets and compared with some other countries seeking transformation paths from coal. Poland’s case can serve as a lesson for all countries trying to reduce coal dependence in power generation. Reforms in the energy sector shall from the very beginning be an essential part of a sustainable transition of the whole nation’s economy. They must scale the power capacity to the future demand avoiding stranded costs. The reforms must be wide-ranging, based on a wide political consensus and not biased against the coal sector. Future energy mix and corresponding technologies shall be carefully designed, matched and should remain stable in the long-term perspective. Coal-based power capacity being near the end of its lifetime provides an economically viable option to commence a fuel switch and the following technology replacement. Real benefits and costs of the energy transition shall be fairly allocated to all stakeholders and communicated to the society. The social costs and implications in coal-dependent regions may be high, especially in the short-term perspective, but then the transformation will bring profits to the whole society.     

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.     

Allometric scaling and accidents at work

Allometry is the knowledge concerning relations between the features of some beings, like animals, or cities. For example, the daily energy rate is proportional to a mass of mammals rise of 3/4. This way of thinking has spread quickly from biology to many areas of research concerned with sociotechnical systems. It was revealed that the number of innovations, patents or heavy crimes rises as social interaction increases in a bigger city, while other urban indexes such as suicides decrease with social interaction. Enterprise is also a sociotechnical system, where social interaction and accidents at work take place. Therefore, do these interactions increase the number of accidents at work or, on the contrary, are they reduction-driving components? This article tries to catch such links and assess the allometric exponent between the number of accidents at work and the number of employees in an enterprise.     

Origin,distribution, and perspective health benefits of particulate matter in the air of underground salt mine: a case study from Bochnia,Poland

Environmental Geochemistry and Health - The composition and distribution of airborne particles in different locations in a salt mine were determined in terms of their origin, the distance from the...     

Dust from Zambian smelters: mineralogy and contaminant bioaccessibility

Metal smelting is often responsible for local contamination of environmental compartments. Dust materials escaping from the smelting facilities not only settle in the soil, but can also have direct effects on populations living close to these operations (by ingestion or inhalation). In this particular study, we investigate dusts from Cu–Co metal smelters in the Zambian Copperbelt, using a combination of mineralogical techniques (XRD, SEM/EDS, and TEM/EDS), in order to understand the solid speciation of the contaminants, as well as their bioaccessibility using in vitro tests in simulated gastric and lung fluids to assess the exposure risk for humans. The leaching of metals was mainly dependent on the contaminant mineralogy. Based on our results, a potential risk can be recognized, particularly from ingestion of the dust, with bioaccessible fractions ranging from 21 to 89 % of the total contaminant concentrations. In contrast, relatively low bioaccessible fractions were observed for simulated lung fluid extracts, with values ranging from 0.01 % (Pb) up to 16.5 % (Co) of total contaminant concentrations. Daily intakes via oral exposure, calculated for an adult (70 kg, ingestion rate 50 mg dust per day), slightly exceeded the tolerable daily intake limits for Co (1.66× for fly ash and 1.19× for slag dust) and occasionally also for Pb (1.49×, fly ash) and As (1.64×, electrostatic precipitator dust). Cobalt has been suggested as the most important pollutant, and the direct pathways of the population’s exposures to dust particles in the industrial parts of the Zambian Copperbelt should be further studied in interdisciplinary investigations.     

Efficient uranium immobilization on red clay with phosphates

Uranium is a very toxic and radioactive element. Removal of uranium from wastewaters requires remediation technologies. Actual methods are costly and ineffective when uranium concentration is very low. Little is known about the enhancement of sorption of uranyl ions by phosphate ions on aluminosilicates. Here, we studied sorption of uranyl acetate on red clay in the presence of phosphates. The concentration of U(VI) ranged 0.0001–0.001 mol/L, whereas the concentration of PO₄ ^3? was constant at 0.0001 mol/L. We designed a new method for the analysis of ternary surface complexes. We observed for the first time a remarkable improvement of U(VI) sorption on red clay under the influence of phosphates. We also found that at least two different ternary surface complexes U(VI)–phosphate–clay are formed in the sorbent phase. The complexation of UO₂ ²⁺ cations by phosphate ligands in the sorbent phase was confirmed by the X-ray photoelectron spectra of U 4f electrons.     

PET from Used Beverage Bottles: A Material for Preparation of Biologically Degradable Copolyesters

Poly(ethylene terephthalate) from used colorless beverage bottles was solvolyzed by ethane-1,2-diol. Hydroxyl end-groups present in the mixture of polyols formed were used to initiate the polymerization of ??-caprolactone (CLO) at 190?°C. Polycondensation (190?°C) of the reaction mixture containing an equilibrium amount of lactone corresponding to the reaction temperature yield an aliphatic?Caromatic copolyester. A variety of copolyesters containing 20?C60?mol. % CLO structural units was prepared. The microstructure of their macromolecules was analyzed using ¹H?NMR spectroscopy. Copolyesters were characterized by thermal analysis and tensile tests and their biodegradation potential was checked by the composting test.