Perfluoroalkyl and polyfluoroalkyl substances thermal desorption evaluation

Per‐ and polyfluoroalkyl substances (PFAS) are highly resistant to biotic and abiotic degradation and can withstand very high temperatures before breaking down. The storage of PFAS‐impacted water and sediments in a holding pond or stockpiled investigation or remedial action‐derived waste is occurring on an increasing number of sites. The most common PFAS water treatment options include granular‐activated carbon and resins and the most common soil treatment options have been primarily limited to excavation, offsite incineration, and, in some cases, soil stabilization. An increasing number of states across the United States are establishing part per trillion PFAS guidance levels for drinking water. Removing PFAS from soils removes PFAS source impacts to groundwater. In this study, volatilization of PFAS from soil treated using in situ thermal heating is evaluated as a treatment method to achieve a high degree of PFAS removal from soils. The evaluation of temperatures needed to achieve removal is described. To minimize vapor treatment required for PFAS thermal remediation, a scrubber was incorporated into the treatment train to transfer PFAS to the liquid phase in a concentrated, low‐volume solution. Vapor‐liquid equilibrium behavior and the extent of PFAS volatilization from impacted soil over a range of temperatures were evaluated. Results showed that heating soil to 350°C and 400°C reduces PFAS soil concentrations by 99.91% and 99.998%, respectively. It was also confirmed that sulfonate‐based PFAS generally required higher temperatures for volatilization to occur than carboxylate‐based PFAS.     

Spatial factors of white-tailed deer herbivory assessment in the central Appalachian Mountains

Because moderate to over-abundant white-tailed deer (Odocoileus virginianus) herbivory impacts biodiversity and can alter community function, ecological benchmarks of herbivory impact are needed to assess deer impacts. We evaluated spatial patterns of deer herbivory and their relation to herbivory assessment by evaluating woody vegetation along 20 transects at each of 30 sites spread across a wide range of deer herd densities and vegetative condition throughout the biodiverse Appalachian Mountains of Virginia, USA. Surprisingly, herbivory patterns and the availability of woody forage generally were unchanged among physiographic regions and land use diversity classes. However, some relationships between browsing pattern and vegetation varied with scale. The total quantity of vegetation browsed on a given site and at the transect scale were related positively to the availability of forage, as the proportion of stems browsed decreased as stem density increased. However, this was only true when all stems were considered equally. When stem densities by species were weighted for deer preference, the proportion of stems browsed had no relationship or increased with stem density. Compared to the value from all transects sampled, on average, the mean of ≥?3 transects within a site was within 0.1 of the browsing ratio and stem densities were within 0.5 stems m^?2. Our results suggest that one transect per square kilometer with a minimum of three transects may be sufficient for most browsing intensity survey requirements to assess herbivory impacts in the Appalachian region of Virginia. Still, inclusion of spatial factors to help partition variation of deer herbivory potentially may allow for improved precision and accuracy in the design of field herbivory impact assessment methods and improve their application across various landscape contexts.     

Erratum to: Estimating urban water demand under conditions of rapid growth: the case of Shanghai

Regional Environmental Change - Many of the world’s major cities are expected to face significant water shortages in coming decades, largely due to increased demand arising from economic and...     

Supporting the risk management process with land information: a case study of Australia

It is frequently argued that, at the parcel level, 1 stakeholders are capable of and well supported in managing their land‐related risks. Yet, evidence from the contemporary Australian context suggests otherwise: numerous large‐scale disaster events have revealed that citizens are ill‐prepared to respond and recover adequately. This paper begins with the premise that information, specifically land information, could better support parcel‐level risk preparation, mitigation, response, and recovery. State land administration organisations in Australia primarily maintain this information and make it accessible. Land information is used regularly across all levels of government to support risk management activities; however, such application has not always occurred at the parcel and citizen level. Via a case study approach, this paper initially explores the land information available in Australia to stakeholders interested in parcel‐level detail, and then goes on to propose how the utilisation of parcel‐level land information could serve to enhance risk management practices.     

High‐Frequency Continuous Monitoring to Track Vapor Intrusion Resulting From Naturally Occurring Pressure Dynamics

Vapor intrusion characterization efforts can be challenging due to complexities associated with background indoor air constituents, preferential subsurface migration pathways, and response time and representativeness limitations associated with conventional low‐frequency monitoring methods. For sites experiencing trichloroethylene (TCE) vapor intrusion, the potential for acute risks poses additional challenges, as the need for rapid response to exposure exceedances becomes critical in order to minimize health risks and associated liabilities. Continuous monitoring platforms have been deployed to monitor indoor and subsurface concentrations of key volatile constituents, atmospheric pressure, and pressure differential conditions that can result in advective transport. These systems can be comprised of multiplexed laboratory‐grade analytical components integrated with telemetry and geographical information systems for automatically generating time‐stamped renderings of observations and time‐weighted averages through a cloud‐based data management platform. Integrated automatic alerting and responses can also be engaged within one minute of risk exceedance detection. The objectives at a site selected for testing included continuous monitoring of vapor concentrations and related surface and subsurface physical parameters to understand exposure risks over space and time and to evaluate potential mechanisms controlling risk dynamics which could then be used to design a long‐term risk reduction strategy. High‐frequency data collection, processing, and automated visualization efforts have resulted in greater understanding of natural processes such as dynamic contaminant vapor intrusion risk conditions potentially influenced by localized barometric pumping induced by temperature changes. For the selected site, temporal correlation was observed between dynamic indoor TCE vapor concentration, barometric pressure, and pressure differential. This correlation was observed with a predictable daily frequency even for very slight diurnal changes in barometric pressure and associated pressure differentials measured between subslab and indoor regimes and suggests that advective vapor transport and intrusion can result in elevated indoor TCE concentrations well above risk levels even with low‐to‐modest pressure differentials. This indicates that vapor intrusion can occur in response to diurnal pressure dynamics in coastal regions and suggests that similar natural phenomenon may control vapor intrusion dynamics in other regions, exhibiting similar pressure, geochemical, hydrogeologic, and climatic conditions. While dynamic indoor TCE concentrations have been observed in this coastal environment, questions remain regarding whether this hydrogeologic and climatic setting represent a special case, and how best to determine when continuous monitoring should be required to most appropriately minimize exposure durations as early as possible. ©2017 Wiley Periodicals, Inc.     

Disaster risk, climate change and international development: scope for, and challenges to, integration

Reducing losses to weather-related disasters, meeting the Millennium Development Goals and wider human development objectives, and implementing a successful response to climate change are aims that can only be accomplished if they are undertaken in an integrated manner. Currently, policy responses to address each of these independently may be redundant or, at worst, conflicting. We believe that this conflict can be attributed primarily to a lack of interaction and institutional overlap among the three communities of practice. Differences in language, method and political relevance may also contribute to the intellectual divide. Thus, this paper seeks to review the theoretical and policy linkages among disaster risk reduction, climate change and development. It finds that not only does action within one realm affect capacity for action in the others, but also that there is much that can be learnt and shared between realms in order to ensure a move towards a path of integrated and more sustainable development.     

Development of a Grassland Integrity Index Based on Breeding Bird Assemblages

We utilized landscape and breeding bird assemblage data from three Breeding Bird Survey (BBS) routes sampled from 1965–1995 to develop and test a grassland integrity index (GII) in a mixed-grass prairie area of Oklahoma. The overall study region is extensively fragmented from long-term agricultural activity, and native habitat remnants have been degraded by recent encroachment of woody vegetation, namely eastern redcedar (Juniperus virginiana L.). The 50 individual bird survey points along the BBS routes, known as stops, were used as sample sites. Our process first focused on developing a grassland disturbance index (GDI) as a measure of cumulative landscape disturbances for these sites. The GDI was based on five key landscape variables identified in an earlier species-level study of long-term avian community dynamics: total tree, shrub, and herbaceous vegetation cover indices, overall mean landscape patch size, and grassland patch core size. The GII was then developed based on breeding bird assemblage data. Assemblages were based on commonly used response guilds reflective of five avian life history parameters: foraging mode/location, nesting location, habitat specificity, migratory pattern, and dietary guild. We tested the response of 78 candidate assemblage metrics to the GDI, and eliminated those with no or poor response or with high correlations (redundant), resulting in 13 metrics for use in the final index. Individual metric scores were scaled to fall between 0 and 10, and the cumulative index to range from 0 to 100. Although broader application and refinement are possible, the avian-based GII has an advantage over labor-intensive, habitat-based monitoring in that the GII is derived from readily available long-term BBS data. Therefore, the GII shows promise as an inexpensive tool that could easily be applied over other areas to monitor changes in regional grassland conditions.     

An FTIR investigation of isocyanate skin absorption using in vitro guinea pig skin

Isocyanates may cause contact dermatitis, sensitization and asthma. Dermal exposure to aliphatic and aromatic isocyanates can occur in various exposure settings. The fate of isocyanates on skin is an important unanswered question. Do they react and bind to the outer layer of skin or do they penetrate through the epidermis as unreacted compounds? Knowing the kinetics of these processes is important in developing dermal exposure sampling or decontamination strategies, as well as understanding potential health implications such exposure may have. In this paper the residence time of model isocyanates on hairless guinea pig skin was investigated in vitro using attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectrometry. Model isocyanates tested were octyl isocyanate, polymeric hexamethylene diisocyanate isocyanurate (pHDI), polymeric isophorone diisocyanate isocyanurate (pIPDI) and methylenediphenyl diisocyanate (MDI). Isocyanates in ethyl acetate (30 microL) were spiked directly on the skin to give 0.2-1.8 micromol NCO cm(-2) (NCO = -N=C=O), and absorbance of the isocyanate group and other chemical groups of the molecule were monitored over time. The ATR-FTIR findings showed that polymeric isocyanates pHDI and pIPDI may remain on the skin as unreacted species for many hours, with only 15-20% of the total isocyanate group disappearing in one hour, while smaller compounds octyl isocyanate and MDI rapidly disappear from the skin surface (80+% in 30 min). Isocyanates most likely leave the skin surface by diffusion predominantly, with minimal reaction with surface proteins. The significance of these findings and their implications for dermal exposure sampling and isocyanate skin decontamination are discussed.     

Evaluation of short-term Ogawa passive, photolytic, and federal reference method sampling devices for nitrogen oxides in El Paso and Houston, Texas

Passive Sampling Devices (PSDs) have been successfully used by government and academic agencies to monitor common ambient air pollutants such as ozone and nitrogen dioxide (NO(2)). Most PSD studies have involved long-term (e.g. bi-weekly or monthly) sampling. But the Passive Ozone Network of Dallas (POND) studies of 1998 and 1999 showed that high quality 24-hour and 12-hour data using the Ogawa PSD could be collected for ambient ozone concentrations. This paper presents an evaluation of short-term passive sampling results for nitrogen oxides (NO(x)) in El Paso and Houston, Texas, using the Ogawa PSD. The Ogawa NO(x) PSDs were compared to both Federal Reference Method (FRM) monitors and a photolytic converter, with the photolytic converter designed to report closer concentrations to "true" NO(x) by more effectively limiting the interferences of other nitrogen species. Overall, good agreement was noted for all three monitor types in both cities, supporting the potential use of lower cost Ogawa PSDs for large multi-site episodic NO(x)/NO(2)/NO saturation screening studies. This evaluation was conducted during two separate six week periods of the cooler winter months so additional testing of the Ogawa PSDs during different seasons is recommended.     

Contaminant Exposure of Barn Swallows Nesting on Bayou D'Inde, Calcasieu Estuary, Louisiana, USA

Current and historical point source discharges, storm water runoff, and accidental spills have contaminated the water, sediment, and biota within the Calcasieu Estuary in southwestern Louisiana. In 2003, barn swallow (Hirundo rustica) eggs and nestlings were collected beneath two bridges that cross Bayou d′Inde, the most contaminated waterway within the Calcasieu Estuary. Samples were also collected from a bridge over Bayou Teche, a reference site in south central Louisiana. Polychlorinated biphenyl (PCB) concentrations in barn swallow eggs and nestlings were significantly higher at the downstream site on Bayou d′Inde (2.8 μ g/g PCBs in eggs and 1.5 μ g/g PCBs in nestlings) than at the other two sites (< 0.2 μ g/g PCBs in eggs and nestlings at both sites). Ethoxyresorufin-O-dealkylase activity in nestling livers was significantly higher at the downstream site on Bayou d′Inde (50 pmol/min/mg) compared to the other two locations (24 pmol/min/mg, each), probably because of exposure to PCBs. Polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran concentrations in eggs and polycyclic aromatic hydrocarbons in nestlings were at background concentrations at all sites. Trace element concentrations in barn swallow eggs and nestling livers were at background levels and did not differ among the three sites. A biomarker of DNA damage did not differ among sites.