Modeling Connectivity of Non‐floodplain Wetlands: Insights,Approaches, and Recommendations

Representing hydrologic connectivity of non‐floodplain wetlands (NFWs) to downstream waters in process‐based models is an emerging challenge relevant to many research, regulatory, and management activities. We review four case studies that utilize process‐based models developed to simulate NFW hydrology. Models range from a simple, lumped parameter model to a highly complex, fully distributed model. Across case studies, we highlight appropriate application of each model, emphasizing spatial scale, computational demands, process representation, and model limitations. We end with a synthesis of recommended “best modeling practices” to guide model application. These recommendations include: (1) clearly articulate modeling objectives, and revisit and adjust those objectives regularly; (2) develop a conceptualization of NFW connectivity using qualitative observations, empirical data, and process‐based modeling; (3) select a model to represent NFW connectivity by balancing both modeling objectives and available resources; (4) use innovative techniques and data sources to validate and calibrate NFW connectivity simulations; and (5) clearly articulate the limits of the resulting NFW connectivity representation. Our review and synthesis of these case studies highlights modeling approaches that incorporate NFW connectivity, demonstrates tradeoffs in model selection, and ultimately provides actionable guidance for future model application and development.     

Further Development of a Specific Conductivity Approach to Measure Groundwater Discharge Area within Lakes

Groundwater exchanges with most lakes are rarely quantified because there are many technical challenges to quantification. We investigated a lakebed mapping approach to infer the relative areas of groundwater exchange in 12 prairie shallow lakes and five Laurentian mixed forest shallow lakes in Minnesota, USA in 2011. We used a relatively common approach (seepage meters) to provide baseline information on the magnitude and direction of flow at four locations in each lake. To expand from point measurements to the whole‐lake scale, we explored use of specific conductivity as a cheaper and more time efficient proxy for groundwater discharge to lakes. We validated the approach at near shore stations in each lake where seepage meter measurements and specific conductivity surveys overlapped. Specific conductivity surveys provided a similar assessment of groundwater discharge compared to seepage meters for 50% of the lake‐sampling period combinations. The lakebed mapping approach, when validated for a lake with a limited number of seepage meter (or alternative methods) measurements, offers the advantages of being more time and labor efficient over the use of a similar number of seepage meter monitoring locations; seepage meters (or piezometers, for example) are costlier in terms of equipment and labor, even for single‐lake studies. We show the combined approach could provide useful baselines for understanding and mapping groundwater exchange in shallow lakes.     

Do concentrations in eggs and liver tissue tell the same story of temporal trends of mercury in high Arctic seabirds?

Mercury(Hg) remains a key contaminant of concern in Arctic biota, and monitoring of Hg concentrations in seabird tissues will be an effective approach to track the effects of implementing the Minamata Convention. We examined trends in total Hg(THg) in liver and egg tissues of two Arctic seabirds, thick-billed murres(Uria lomvia) and northern fulmars(Fulmarus glacialis), between 1976 and 2013 to assess whether both tissues showed similar patterns of Hg change. Hepatic THg was consistently higher than egg THg, and both species had similar egg THg concentrations, but fulmars had higher hepatic THg than murres.Murre THg concentrations showed more relative variation through time than fulmars.We suggest that egg THg better reflects exposure of birds to THg in local, Arctic prey,whereas liver THg may incorporate longer term, year-round THg exposure. Additional analysis of THg distribution in Arctic seabirds post-laying would help inform interpretation of long-term trends.     

Restraint use in the Eastern Province of the Kingdom of Saudi Arabia

Objectives: This study set out to examine seat belt and child restraint use in the Dammam Municipality of the Kingdom of Saudi Arabia, based on the premise that an increase in seat belt use would significantly reduce personal injury in traffic crashes. It was expected that local data would help identify intervention strategies necessary to improve seat belt use in the region.

Methods: The research involved 2 methodologies. First, 1,389 face-to-face interviews were conducted with male and female adults in regional shopping plazas regarding their own and their children's restraint use in their vehicles and reasons for these attitudes and beliefs. Second, 2 on-road observation studies of adult and child restraint use were conducted by trained observers. Occupants of approximately 5,000 passenger vehicles were observed while stopped at representative signalized traffic intersections.

Results: The findings showed front seat belt use rates of between 43 and 47% for drivers and 26 to 30% for front seat passengers; rear seat belt use rates were lower. While there seemed to be some knowledge about the purpose and reasons for restraining both adults and children in suitable restraints, this failed to be confirmed in the on-road observations.

Conclusions: Reasons for these rates and findings are discussed fully, and recommendations for improving seat belt use in the Dammam Municipality are included.     

Seat belt use among car drivers in Iranian safe communities: An observational study

Objective: The number of road traffic injuries and fatalities in Iran is high. The aim of the present study was to investigate the rate of drivers' seat belt use and a number of related factors in Kashmar, Bardaskan, and Khalilabad (Iranian Safe Communities).Methods: In 2014, driver observations were made at 48 road sites on intercity roads, main streets, side streets, and rural roads in these 3 cities.Results: A total of 10,255 vehicles were observed, with the overall rate of seat belt use being 51.8%. The rates in Kashmar, Bardaskan, and Khalilabad were 51.4, 56.3, and 47.7%, respectively. In Kashmar, the odds of seat belt use were higher among drivers who were female, older, and taxi drivers. Higher use was also found during the afternoon, and lower use was observed on rural roads. In Khalilabad the odds of seat belt use were higher among females, older drivers, taxis, and private car drivers. Seat belt use was also higher on weekends and during the morning but was significantly lower on rural roads. Similarly, in Bardaskan the odds of using a seat belt were higher among females, older drivers, taxis, and private car drivers. Seat belt use was also higher during the afternoon but was significantly lower on rural roads, in comparison to main streets and intercity roads.Conclusions: The rate of seat belt use in these 3 cities was found to be low, despite these cities being designated as International Safe Communities. Therefore, seat belt promotion programs, tougher regulations, stronger enforcement, public awareness campaigns, and more research are needed to promote seat belt use in these Iranian cities.     

Leaching of heavy metals from E-waste in simulated landfill columns

In recent history the volume of electronic products purchased by consumers has dramatically escalated. As a result this has produced an ever-increasing electronic waste (E-waste) stream, which has generated concerns regarding the E-waste’s potential for adversely impacting the environment. The leaching of toxic substances from obsolete personal computers (PCs) and cathode ray tubes (CRTs) of televisions and monitors, which are the most significant components in E-waste stream, was studied using landfill simulation in columns. Five columns were employed. One column served as a control which was filled with municipal solid waste (MSW), two columns were filled with a mixture of MSW and CRTs, and the other two were filled with MSW and computer components including printed wire boards, hard disc drives, floppy disc drives, CD/DVD drives, and power supply units. The leachate generated from the columns was monitored for toxic materials throughout the two-year duration of the study. Results indicate that lead (Pb) and various other heavy metals that were of environmental and health concern were not detected in the leachate from the simulators. When the samples of the solids were collected from underneath the E-waste in the columns and were analyzed, significant amount of Pb was detected. This indicates that Pb could readily leach from the E-waste, but was absorbed by the solids around the E-waste materials. While Pb was not observed in the leachate in this study, it is likely that the Pb would eventually enter the leachate after a long term transport.     

Leaf size and surface characteristics of Betula papyrifera exposed to elevated CO2 and O3

Betula papyrifera trees were exposed to elevated concentrations of CO₂ (1.4 × ambient), O₃ (1.2 × ambient) or CO₂ + O₃ at the Aspen Free-air CO₂ Enrichment Experiment. The treatment effects on leaf surface characteristics were studied after nine years of tree exposure. CO₂ and O₃ increased epidermal cell size and reduced epidermal cell density but leaf size was not altered. Stomatal density remained unaffected, but stomatal index increased under elevated CO₂. Cuticular ridges and epicuticular wax crystallites were less evident under CO₂ and CO₂ + O₃. The increase in amorphous deposits, particularly under CO₂ + O_3, was associated with the appearance of elongated plate crystallites in stomatal chambers. Increased proportions of alkyl esters resulted from increased esterification of fatty acids and alcohols under elevated CO₂ + O₃. The combination of elevated CO₂ and O₃ resulted in different responses than expected under exposure to CO₂ or O₃ alone.     

A passive sampling method for radiocarbon analysis of atmospheric CO2 using molecular sieve

Radiocarbon (¹⁴C) analysis of atmospheric CO₂ can provide information on CO₂ sources and is potentially valuable for validating inventories of fossil fuel-derived CO₂ emissions to the atmosphere. We tested zeolite molecular sieve cartridges, in both field and laboratory experiments, for passively collecting atmospheric CO₂. Cartridges were exposed to the free atmosphere in two configurations which controlled CO₂ trapping rate, allowing collection of sufficient CO₂ in between 1.5 and 10 months at current levels. ¹⁴C results for passive samples were within measurement uncertainty of samples collected using a pump-based system, showing that the method collected samples with ¹⁴C contents representative of the atmosphere. δ¹³C analysis confirmed that the cartridges collected representative CO₂ samples, however, fractionation during passive trapping means that δ¹³C values need to be adjusted by an amount which we have quantified. Trapping rate was proportional to atmospheric CO₂ concentration, and was not affected by exposure time unless this exceeded a threshold. Passive sampling using molecular sieve cartridges provides an easy and reliable method to collect atmospheric CO₂ for ¹⁴C analysis.