Biomonitoring of heavy metals in fish from the Danube River

The Croatian part of the Danube River extends over 188 km and comprises 58 % of the country’s overall area used for commercial freshwater fishing. To date, the heavy metal contamination of fish in the Croatian part of the Danube has not been studied. The main purpose of this study was to determine heavy metal levels in muscle tissue of sampled fish species and to analyze the measured values according to feeding habits of particular groups. Lead ranged from 0.015 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in herbivorous fish, cadmium from 0.013 μg^?1 dry weight in herbivorous to 0.018 μg^?1 dry weight in piscivorous fish, mercury from 0.191 μg^?1 dry weight in omnivorous to 0.441 μg^?1 dry weight in planktivorous fish and arsenic from 0.018 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in omnivorous fish. Among the analyzed metals in muscle tissue of sampled fish, only mercury exceeded the maximal level (0.5 mg kg^?1) permitted according to the national and EU regulations determining maximum levels for certain contaminants in foodstuffs, indicating a hazard for consumers of fish from the Danube River.     

The Adsorption of Formaldehyde on Suspended Particles investigated on model systems

Our laboratory investigation aimed at assessing to what extent suspended particles could adsorb formaldehyde, allowing it, when inhaled, to penetrate deeper into the lung. We used two types of pure soot, N-220 and N-660 (the former being a highly active oil furnace soot with smaller particles and a larger surface area than the latter), because of their chemical inactivity and the adsorptive properties. The results obtained in experimental conditions showed that soot particles could bind 2.3 to 50.2% of formaldehyde, depending on the particle size, relative humidity, amount of particles and the duration of the contact. The recovery of formaldehyde from the particles was also tested. Further investigation is planned under realistic conditions.     

Determination of O3, NO2, SO2, CO and PM10 measured in Belgrade urban area

O(3), NO(2), SO(2), CO and PM(10) concentrations, simultaneously determined for the first time in Belgrade urban area in the autumnal period of 2005, are presented. The obtained results display similar behaviour of SO(2), NO(2), CO, PM(10) opposite from that of O(3). The weekend effect was also investigated showing diminution of average daily concentrations of SO(2), NO(2), PM(10) and CO for 72, 40, 37 and 42% respectively, and increase of the average daily concentration of O(3) for 56%. Influence of meteorological conditions on observed concentration levels was studied, too. The observed influence of wind speed on the O(3) nightly concentration levels was analyzed pointing to the phenomena of O(3) transport during episodic measurements. To make an identification of possible pollution sources and analyse the influence of meteorological parameters on pollution levels, air back trajectories for high level concentrations episodes were calculated and analysed. A multivariate receptor modelling (Principal Component Analysis, Cluster Analysis) has been applied to a set of data in order to determine the contribution of different sources. It was found that the main principal components, extracted from the air pollution data, were related to gasoline combustion, oil combustion and ozone transport.     

Determination of As in tree-rings of poplar (Populus alba L.) by U-shaped DC arc

In this work, experiments were undertaken in an open field having 10,000 m2 area purified from any noise on 121 survey stations using the central frequencies of seven different octave bands with a single and double artificially formed sources of noise. Meteorological parameters such as temperature, humidity, atmospheric pressure, velocity and direction of wind were also taken into consideration. Additionally, the effect of reflecting waves from any surface was also experimentally examined. To evaluate the data obtained, the statistical program of SPSS 9.05 was utilized. From this research, an equation utilising all the parameters was developed.     

Long-term investigations of post-Chernobyl radiocaesium in fallout and air in North Croatia

The long-term behaviour of (137)Cs activity concentrations in air and fallout has been studied in the city of Zagreb for the post-Chernobyl period (1986-2006) as a part of an extended monitoring program of radioactive contamination of human environment in Croatia. Annual mean (137)Cs activity concentrations in air and annual total deposition fluxes (wet plus dry) decreased from 2.8 x 10(-4) Bq m(-3) in September 1986 to 3.0 x 10(-6) Bq m(-3) in last quarter of 2006 and from 6,410 Bq m(-2) year(-1) in 1986 to 2 Bq m(-2) year(-1) in 2006 respectively. By fitting the measured (137)Cs activity concentrations to the theoretical curve the ecological half-lives of (137)Cs in air and fallout were estimated with respective values of 0.46 and 0.54 years for immediate post-Chernobyl period, increasing to 5.52 and 3.97 years afterwards. Using the data on (137)Cs activity concentrations in air and fallout total caesium deposition velocity of (3.34 +/- 3.13) x 10(-2) ms(-1) was estimated with median value being 2.13 x 10(-2) ms(-1). Such relatively high (137)Cs deposition velocities compared with pre-Chernobyl ones, are characteristic for the post-Chernobyl period and, according to Stokes' settling law, indicate that the diameters of aerosol particles associated with (137)Cs originated from the Chernobyl accident are pretty large, i.e. >1 microm. (134)Cs/(137)Cs activity ratio in fallout and in air has been found to be similar to the theoretically predicted values, initial value being about 0.5 and decreasing according to differential radioactive decay. The similar ratio has been observed in most of the other environmental samples.     

Assessment of ozone variations and meteorological influences in a tourist and health resort area on the island of Mali Lošinj (Croatia)

The purpose of this study was to investigate ozone, variations, and its correlation with meteorological parameters at a remote location on the Mali Lo?inj Island, which has been a tourist and health resort area in the northern Adriatic. The measured data are discussed in relation to the EU guidelines (Directive 2002/3/EC; Directive 2008/50/EC). In order to characterize ambient air with respect to ozone vegetation injury and photochemical pollution, we calculated accumulated dose over a threshold of 40 parts per billion index and two photochemical pollution indicators. The influence of local meteorological parameters on the measured ozone volume fractions was also investigated. We used the multivariate technique principal component analysis to trace correlations between measured ozone concentration and meteorological parameters.     

Characterization of PCBs from computers and mobile phones, and the proposal of newly developed materials for substitution of gold, lead and arsenic

In this paper, we have analyzed parts of printed circuit board (PCB) and liquid crystal display (LCD) screens of mobile phones and computers, quantitative and qualitative chemical compositions of individual components, and complete PCBs were determined. Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) methods were used to determine the temperatures of phase transformations, whereas qualitative and quantitative compositions of the samples were determined by X-ray fluorescence spectrometry (XRF), inductively coupled plasma optical emission spectrometry (ICP-OES), and scanning electron microscopy (SEM)-energy dispersive X-ray spectrometry (EDS) analyses. The microstructure of samples was studied by optical microscopy. Based on results of the analysis, a procedure for recycling PCBs is proposed. The emphasis was on the effects that can be achieved in the recycling process by extraction of some parts before the melting process. In addition, newly developed materials can be an adequate substitute for some of the dangerous and harmful materials, such as lead and arsenic are proposed, which is in accordance with the European Union (EU) Restriction of the use of certain hazardous substances (RoHS) directive as well as some alternative materials for use in the electronics industry instead of gold and gold alloys.     

Formation of PFOA from 8:2 FTOH in closed-bottle experiments with brackish water

The formation of perfluorooctanoate (PFOA) from 1H,1H,2H,2H-perfluorodecanol (8:2 FTOH) was studied for the first time in laboratory experiments with brackish water. The water samples were collected from the Baltic Sea, which is one of the largest brackish water areas in the world and is polluted with PFOA and other perfluorinated compounds. The formation of PFOA was studied in closed-bottle experiments at different water temperatures. As a reference experiment, a modified OECD 310 test was conducted with sludge from a wastewater treatment plant and with brackish water. The PFOA and 8:2 FTOH were concentrated from water samples by solid-phase extraction (SPE) and were analysed using liquid chromatography–mass spectrometry. The effect of oxygen concentration on the formation of PFOA was studied using surface water samples with high and low oxygen contents. Other experiments were performed with oxygen-rich surface water and oxygen-deficient bottom water. The formation of PFOA was observed in all experiments; it was higher in the trial performed with brackish water than in the reference test carried out with sludge. Clear temperature dependence was observed in the formation of PFOA in brackish water tests; after a 30-day test period, a sixfold increase was observed in the amount of PFOA in surface water between the temperatures of 15 and 20 °C. Microbes were suggested as the major cause of the formation of PFOA, but other environmental characteristics, such as oxygen, could also affect the formation potential of PFOA.     

In vitro activity of antimicrobial agents against Pseudomonas tolaasii,pathogen of cultivated button mushroom

In vitro antibacterial activity tests of seven biofungicides (Ekstrasol, Bisolbisan, Bisolbifit, Serenade, Sonata, Timorex, F-Stop) and two disinfectants (colloidal silver alone and in combination with hydrogen peroxide) against the Pseudomonas tolaasii strain (NS3B6) were carried out by the disc-diffusion, broth microdilution and broth macrodilution method. Biofungicides tested in this study did not exhibit any antimicrobial activity in neither one of the methods used. Disc diffusion method revealed high sensitivity of the tested P. tolaasii strain to Ecocute based on colloidal silver and hydrogen peroxide. Both microdilution and macrodilution methods identified the same MICs and MBCs of Ecocute (0.19 mg/L) for P. tolaasii strain. MICs and MBCs values of silver alone were much higher (10 mg/L) compared to silver in combination with hydrogen peroxide.