Benefits of protected areas for nonbreeding waterbirds adjusting their distributions under climate warming

Climate warming is driving changes in species distributions and community composition. Many species have a so-called climatic debt, that is, shifts in range lag behind shifts in temperature isoclines. Inside protected areas (PAs), community changes in response to climate warming can be facilitated by greater colonization rates by warm-dwelling species, but also mitigated by lowering extirpation rates of cold-dwelling species. An evaluation of the relative importance of colonization-extirpation processes is important to inform conservation strategies that aim for both climate debt reduction and species conservation. We assessed the colonization-extirpation dynamics involved in community changes in response to climate inside and outside PAs. To do so, we used 25 years of occurrence data of nonbreeding waterbirds in the western Palearctic (97 species, 7071 sites, 39 countries, 1993–2017). We used a community temperature index (CTI) framework based on species thermal affinities to investigate species turnover induced by temperature increase. We determined whether thermal community adjustment was associated with colonization by warm-dwelling species or extirpation of cold-dwelling species by modeling change in standard deviation of the CTI (CTI_SD). Using linear mixed-effects models, we investigated whether communities in PAs had lower climatic debt and different patterns of community change than communities outside PAs. For CTI and CTI_SD combined, communities inside PAs had more species, higher colonization, lower extirpation, and lower climatic debt (16%) than communities outside PAs. Thus, our results suggest that PAs facilitate 2 independent processes that shape community dynamics and maintain biodiversity. The community adjustment was, however, not sufficiently fast to keep pace with the large temperature increases in the central and northeastern western Palearctic. Our results underline the potential of combining CTI and CTI_SD metrics to improve understanding of the colonization-extirpation patterns driven by climate warming.     

Occupational safety and health education under the lifelong learning framework in Serbia

Serbia is aligning with European Union requirements and the occupational safety and health (OSH) administration is one of the most representative sectors of this alignment. Many efforts were made in this field, by introducing new laws and regulations, but it turned out to be insufficient. OSH professionals need to renovate and strengthen their knowledge in accordance with continuous, updated and improved OSH standards and regulation. Lifelong learning (LLL) programmes can contribute to forming professionals who are always up to date. This paper presents an implemented LLL programme, over the duration of two academic years, dedicated to OSH professionals, and investigates whether this programme will be helpful and accepted by professionals. The results from the study show that the given LLL programme had indeed a positive influence on the professional careers of the participants and that the LLL presents the future trend in OSH education.     

A Fuzzy Model for Assessing Risk of Occupational Safety in the Processing Industry

Abstract

Managing occupational safety in any kind of industry, especially in processing, is very important and complex. This paper develops a new method for occupational risk assessment in the presence of uncertainties. Uncertain values of hazardous factors and consequence frequencies are described with linguistic expressions defined by a safety management team. They are modeled with fuzzy sets. Consequence severities depend on current hazardous factors, and their values are calculated with the proposed procedure. The proposed model is tested with real-life data from fruit processing firms in Central Serbia.     

Investment Evaluation of an Integrated Steel Mill using Multiple Criteria

A conventional steel manufacturing process generates considerable amounts of reject streams and secondary raw material. These streams are either recycled back to the process or treated as waste. Recycling affects negatively on the production yield and on the controllability of unit operations. Waste represents considerable cost unless utilized in another production process as raw material. In these streams, there exists a potential to use the chemical elements more effectively. Therefore, it might be interesting to find an economical technical solution to collect the streams and increase steel production.

Investments on process equipment are typically evaluated using conventional economic figures, like payback time, Net Present Value (NPV) etc. The problem with these practices is, that they consider only numerical aspects. Non-numerical and non-economical criteria are hard to cater to the evaluation. Still, they may affect on the investment profitability in the long run. Such criteria include environmental friendliness or the aspects of process integration.

The article presents a comparison of a conventional steel manufacturing process with one reject stream processing alternative. A target in the process modification is to optimize the use of material and energy within the site. The comparison is based on a balanced set of criteria that affect on the efficiency of an investment. The use of these criteria is a part of the new methodology that has been developed to evaluate investments on integrated process sites. In addition to the criteria, the complete methodology includes: 1) connection of company’s strategic issues into technical design and decision making, 2) optimization of the process and calculation of process potentials (differences in the performance values between the existing process and the modified process) through the use of process integration methodologies and 3) use of decision-making aids. The research is a part of Finnish National Technology Program, “Process-Integration 2000–2004”.     

Future climate and adverse health effects caused by fine particulate matter air pollution: case study for Poland

Ground level air pollution, especially fine particulate matter (PM_2.5), has been associated with a number of adverse health effects. The dispersion of PM_2.5 through the atmosphere depends on several mutually connected anthropogenic, geophysical and meteorological parameters, all of which are affected by climate change. This study examines how projected climate change would affect population exposure to PM_2.5 air pollution in Poland. Population exposure to PM_2.5 in Poland was estimated for three decades: the 1990s, 2040s and 2090s. Future climate conditions were projected by Regional Climate Model RegCM (Beta), forced by the general atmospheric circulation model ECHAM5. The dispersion of PM_2.5 was simulated with chemical transport model CAMx version 4.40. Population exposure estimates of PM_2.5 were 18.3, 17.2 and 17.1 μg/m³ for the 1990s, 2040s and 2090s, respectively. PM_2.5 air pollution was estimated to cause approximately 39,800 premature deaths in the population of Poland in the year 2000. Our results indicate that in Poland, climate change may reduce the levels of exposure to anthropogenic particulate air pollution in future decades and that this reduction will reduce adverse health effects caused by the air pollution.     

How living systems recognize applied electromagnetic fields

Natural and man-made magnetic and electromagnetic fields are important factors in the contemporary life. The paper discusses the role of environmental magnetic and electromagnetic fields in origin and evolution of life. A brief review of the characteristics of Earth magnetic field, Earth magnetosphere, and their role as a shield for cosmic radiation follows. The role of endogenous and exogenous magnetic fields is discussed in respect of the clarification of the potential hazard and benefit of electromagnetic fields. The second part of the paper discusses the mechanisms of detection and response to exogenous electromagnetic fields, as well as threshold versus window hypothesis for mechanisms of interactions. Finally, the necessity of accurate dosimetry at the target site and the importance of relevant research and clinical protocols in studying biological responses are pointed out.     

Highly active photocatalytic coatings prepared by a low-temperature method

Photocatalytic properties of titanium (IV) oxide (TiO₂) in anatase form can be used for various purposes, including photocatalytic purification of water. For such an application, suspended or fixed photocatalytic reactors are used. Those with fixed phase seem to be preferred due to some advantages, one of which is the avoidance of photocatalyst filtration. To avoid leaching and exfoliation of the fixed phase, an immobilization procedure leading to a good adhesion of a catalyst to a substrate is crucial. Within this work, we present physical and photocatalytic characterization results of five commercially available TiO₂ photocatalysts (P25, P90, PC500, KRONOClean 7000, VPC-10) and one pigment (Hombitan LO-CR-S-M), which were successfully immobilized on glass slides by a “sol suspension” procedure. Different mechanical tests and characterization methods were used to evaluate the stability and morphology of the layers. Evaluation of photocatalytic activity was done by tests under UVA and UV–vis irradiation, using a method based on the detection of the fluorescent oxidation product of terephthalic acid (TPA), i.e., hydroxyterephthalic acid (HTPA). Aeroxide® P90 incorporated into the silica-titania binder was the most photocatalytically active layer and, unlike the others, showed significant increase of photocatalytic activity through the entire range of tested UVA irradiation intensities (2.3 mW/cm²–6.1 mW/cm²). The high mechanical stability of some photocatalytic layers allows using them in water photocatalytic purification reactions.     

Assumptions of the Deficit Model Type of Thinking: Ignorance, Attitudes, and Science Communication in the Debate on Genetic Engineering in Agriculture

This paper spells out and discusses four assumptions of the deficit model type of thinking. The assumptions are: First, the public is ignorant of science. Second, the public has negative attitudes towards (specific instances of) science and technology. Third, ignorance is at the root of these negative attitudes. Fourth, the public’s knowledge deficit can be remedied by one-way science communication from scientists to citizens. It is argued that there is nothing wrong with ignorance-based explanations per se. Ignorance accounts at least partially for many cases of opposition to specific instances of science and technology. Furthermore, more attention needs to be paid to the issue of relevance. In regard to the evaluation of a scientific experiment, a technology, or a product, the question is not only “who knows best?,” but also “what knowledge is relevant and to what extent?.” Examples are drawn primarily from the debate on genetic engineering in agriculture.     

Toxicological characterization of the landfill leachate prior/after chemical and electrochemical treatment: A study on human and plant cells

In this research, toxicological safety of two newly developed methods for the treatment of landfill leachate from the Piškornica (Croatia) sanitary landfill was investigated. Chemical treatment procedure combined chemical precipitation with CaO followed by coagulation with ferric chloride and final adsorption by clinoptilolite. Electrochemical treatment approach included pretreatment with ozone followed by electrooxidation/electrocoagulation and final polishing by microwave irradiation. Cell viability of untreated/treated landfill leachate was examined using fluorescence microscopy. Cytotoxic effect of the original leachate was obtained for both exposure periods (4 and 24 h) while treated samples showed no cytotoxic effect even after prolonged exposure time. The potential DNA damage of the untreated/treated landfill leachate was evaluated by the comet assay and cytokinesis-block micronucleus (CBMN) assay using either human or plant cells. The original leachate exhibited significantly higher comet assay parameters compared to negative control after 24 h exposure. On the contrary, there was no significant difference between negative control and chemically/electrochemically treated leachate for any of the parameters tested. There was also no significant increase in either CBMN assay parameter compared to the negative control following the exposure of the lymphocytes to the chemically or electrochemically treated landfill leachate for both exposure periods while the original sample showed significantly higher number of micronuclei, nucleoplasmic bridges and nuclear buds for both exposure times. Results suggest that both methods are suitable for the treatment of such complex waste effluent due to high removal efficiency of all measured parameters and toxicological safety of the treated effluent.