Estimation of the reproductive output of the burrowing shrimp Callianassa tyrrhena : a comparison of three different biometrical approaches

Reproductive output, as the percentage of the mother weight devoted to egg production, was estimated for the burrowing shrimp Callianassa tyrrhena in wet, dry and ash-free dry weight. Three biometrical approaches were used. First, the relationship between the egg mass and the mother weight was determined. A second approach was to estimate the weight loss of the female caused by oviposition. Similar results were obtained from these methods for dry and ash-free dry weight (about 20 and 35%, respectively), but not for the wet weight estimation. The third approach, based on the weight loss of the ovary, did not reveal a constant value for reproductive output throughout the female size range, although it was found that the ovary loses a constant percentage of its weight during oviposition. This discrepancy is due to the fact that the ovary weight shows positive allometry to the weight of the female body. The comparison of the three methods offers insight into the biological events that are related to ovary maturation and oviposition. It is suggested that molting just before oviposition and its inhibition during the yolk accumulation in the ovary play dominant roles in the expression of the reproductive output in the different approaches used. Received: 17 July 1996 / Accepted: 11 September 1996     

Molecular and cytogenetic characterization of extra-structurally abnormal chromosomes (ESACs) found prenatally: outcome and follow-up

A 40-year-old woman underwent amniocentesis at 15.3 weeks of gestation. Chromosome analysis performed using QFQ, DA-DAPI and CBG banding revealed two de novo extra-chromosomal markers (ESACs) in 11 of the 16 colonies analysed. Fluorescence in situ hybridization (FISH) showed that both chromosomes came from the Yq11.22.1 region of the Y chromosome. PCR analysis of genes and STS localized on the Y chromosome excluded the Yp presence specifically of the SRY gene, and most of the euchromatic region of Yq. After extensive genetic counselling and considering both laboratory and second-level ultrasound data, the couple decided to continue the pregnancy. At 37.4 weeks of gestational age, a girl weighing 2750 g was born with an Apgar score of 9/10. A blood sample taken from the umbilical cord showed three cellular lines:mos47,XX, +mar1 ish.der (Y)(wcpY+) [21%]/48,XX, +mar1 ish.der (Y)(wcpY+), +mar2 ish.der (Y)(wcpY+) [41%]/46,XX [38%]. One year after birth, the baby was developing normally and had normal psychomotorial activity. Copyright © 2003 John Wiley & Sons, Ltd.     

A side-by-side comparison of two systems of sequencing coupled reactors for anaerobic digestion of the organic fraction of municipal solid waste.

The objective of this work was to compare the performance of two laboratory-scale, mesophilic systems aiming at the anaerobic digestion of the organic fraction of municipal solid wastes (OFMSW). The first system consisted of two coupled reactors packed with OFMSW (PBR1.1-PBR1.2) and the second system consisted of an upflow anaerobic sludge bed reactor (UASB) coupled to a packed reactor (UASB2.1-PBR2.2). For the start-up phase, both reactors PBR 1.1 and the UASB 2.1 (also called leading reactors) were inoculated with a mixture of non-anaerobic inocula and worked with leachate and effluent full recirculation, respectively. Once a full methanogenic regime was achieved in the leading reactors, their effluents were fed to the fresh-packed reactors PBR1.2 and PBR2.2, respectively. The leading PBR 1.1 reached its full methanogenic regime after 118 days (Tm, time to achieve methanogenesis) whereas the other leading UASB 2.1 reactor reached its full methanogenesis regime after only 34 days. After coupling the leading reactors to the corresponding packed reactors, it was found that both coupled anaerobic systems showed similar performances regarding the degradation of the OFMSW. Removal efficiencies of volatile solids and cellulose and the methane pseudo-yield were 85.95%, 80.88% and 0.109 NL CH4 g(-1) VS(fed) in the PBR-PBR system; and 88.75%, 82.61% and 0.115 NL CH4 g(-1) VS(fed0 in the UASB-PBR system [NL, normalized litre (273 degrees K, 1 ata basis)]. Yet, the second system UASB-PBR system showed a faster overall start-up.     

Simulation and life cycle assessment of process design alternatives for biodiesel production from waste vegetable oils

This study uses the process simulator ASPEN Plus^® and Life Cycle Assessment (LCA) to compare three process design alternatives for biodiesel production from waste vegetable oils that are: the conventional alkali-catalyzed process including a free fatty acids (FFAs) pre-treatment, the acid-catalyzed process, and the supercritical methanol process using propane as co-solvent. Results show that the supercritical methanol process using propane as co-solvent is the most environmentally favorable alternative. Its smaller steam consumption in comparison with the other process design alternatives leads to a lower contribution to the potential environmental impacts (PEI’s). The acid-catalyzed process generally shows the highest PEI’s, in particular due to the high energy requirements associated with methanol recovery operations.     

Emergy as a tool for Ecodesign: evaluating materials selection for beverage packages in Brazil

The life of a product begins with the initial product design concepts; the costs and potential impacts of a product are heavily influenced by the final design, the production processes, the economic and environmental costs of all raw materials. Additionally, both of these factors are very much affected by how the products are managed during and after consumer usage. Thus, there is an urgent need for a tool to facilitate the integration and assessment of environmental and economic demands into the product planning and development processes. The introduction of environmental accounting based on emergy as a tool to assist in product design is proposed. This complementary tool may be inserted into the conventional design methodology to facilitate in the selection of materials and processes as well as in the actual design of the products. To illustrate the application of the proposed method for material selection, PET (polyethylene terephthalate) bottles and aluminum cans for beverage packaging are compared. Despite the exceptional condition of aluminum recycling in Brazil, results show that the best option for beverage packages is the PET bottles.     

Sustainability assessment of a giant bamboo plantation in Brazil: exploring the influence of labour,time and space

Bamboo presents physical and mechanical characteristics, which turn it an alternative option for product development, replacing native or reforested wood. The sustainability assessment of a Dendrocalamus Giganteus species plantation in Brazil through the emergy methodology evidences a great weight of renewable (30% sej/sej) and human labour contributions (33% sej/sej). These contributions account for the great interface with environment and to the intensive work, respectively. The transformity value of bamboo production is 2.42E + 04 sej/J. The influence human labour has on the total emergy flow and on indicators is evaluated by taking into account different country locations (Brazil, Australia and China). Thus, a different transformity value for labour is assumed for each country. A ranking based on emergy sustainability index (ESI) values shows that bamboo production in China was the first placed, followed by Brazil and Australia (values of 1.18, 0.50 and 0.09, respectively). The insertion of indirect renewability embedded in labour results in the ranking modification, leading to plantation in Brazil in the first place, followed by the Australian and Chinese ones. The relative position of the bamboo systems is visualized in the ternary diagram expressed in terms of emergy. In an attempt to explore the relationship between sustainability and time, a graphic of ESI vs. global productivity is discussed in terms of a prospective evaluation. Indirect support areas of the bamboo production are calculated as a way to evaluate the sustainability-space relationship.