Animal-sediment relations and community analysis of a Florida estuary

Five species assemblages of the intertidal infauna of Old Tampa Bay, Florida, USA are identified. Two assemblages are judged to constitute distinct communities, while a third is shown to be an interdigitation of the two communities. Dominance by on species is the prevalent pattern within the assemblages. Numbers of deposit feeders are found to be inversely correlated to that of filter feeders, and both trophic types are found to be correlated to the sediment parameters of median grain size, sorting and skewness. Three transects with three stations each were established along the south side of Courtney Campbell Causeway in Tampa Bay, Florida. A faunal sample (0.4 m²), a sediment sample, and a water sample were taken at each station in September, December, and March of 1968/1969. Sediment samples were wet-seived. Animal samples were reduced to numbers of organisms and biomass per species. Trellis diagrams and correlation tests were generated. Support is shown for the trophic group-amensalims hypothesis, however, the silt-clay fraction is apparently of lesser importance to deposit feeders in Florida sediments than in Buzzards Bay sediments. An attempt is made to relate an analysis of the optimal grain size for filter feeders to the trophic group-amensalism hypothesis. A view of communities as abstractions from continua is more realistic than communities as discrete units.     

Advancing the use of an innovative cleanup technology: Case study of Lasagna™

Originated from a recognized need for significantly more effective technologies for soil cleanup, the Lasagna^TM project provides an interesting case study in which industry, government, and academia successfully collaborated to rapidly advance the technology from the laboratory to the field. Called Lasagna^TM because of its layered configurations, the technology combines electrically induced contaminant transport in soils, treatment in place, and geotechnical methods to achieve completely in situ clean-up of contaminated soils. Experiences with respect to the partnership, the development of technology and its current commercialization status are described.     

Evaluation of Material Biodegradability in Real Conditions–Development of a Burial Test and an Analysis Methodology Based on Numerical Vision

This work validated a burial protocol for in situ testing and presents a robust, repeatable and time-saving technique to measure degraded areas in the sample, i.e. an image analysis method. 1440 specimens of degraded samples have been compiled in a data base. To this end, twenty samples presenting different levels of biodegradability (i.e. PHBV/HV, PLA, PCL, PCL-Starch, paper, PE, PE-Starch) were buried at 4 different locations and then disinterred at 4, 6, 9, 12, 18, and 24-month intervals. The biodegradation levels of these samples were determined by computing weight and area loss. Weight loss was measured after careful cleaning, whereas area loss was quantified using image analysis. Image analysis gives reliable information on visual pollution while only requiring a rudimentary and thus quicker cleaning of the samples.     

Interpretation of analytical data on n-alkanes and polynuclear aromatic hydrocarbons in Arbacia lixula from the coasts of Tenerife (Canary Islands, Spain) by multivariate data analysis

The hydrocarbons contents (n-alkanes, polycyclic aromatic hydrocarbons) were determined in the sea urchin Arbacia lixula. Multivariate data analysis as principal component analysis, factor analysis and, cluster analysis were applied to elucidate sources of pollution. PCA and FA were performed to establish the relationships between variables (hydrocarbons), samples (sea urchin) and sources of pollution.     

Interpretation of heavy metal data from mussel by use of multivariate classification techniques

Different strategies of multivariate analysis of metals concentrations (Mn, Fe, Ni, V, Co, Cu, Cd, Hg, Pb, Na, K) in mussel samples from different spanish markets are used to interpret a data base and identify differences between species and origin of the samples. Principal Component Analysis and Potential curves are applied to properly classify unknown samples from representative mussels samples (Mytilus edulis and Perna canaliculus). Also, Principal Components Analysis is used as display method to visualize the relation between the variables and objects of interest.     

Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.     

Enhancement of chemical-oxygen demand and color removal of distillery spent-wash by ozonation.

Distillery spent-wash has very high organic content (75,000 to 125,000 mg/L chemical-oxygen demand [COD]), color, and contains difficult-to-biodegrade organic compounds. For example, anaerobic treatment of the distillery spent-wash used in this study resulted in 60% COD reduction and low color removal. Subsequent aerobic treatment of the anaerobic effluent resulted in enhancement of COD removal to 66%. In this paper, the effect of ozonation on various properties of the anaerobically treated distillery effluent, including the effect on its subsequent aerobic biodegradation, was investigated. Ozonation of the anaerobically treated distillery effluent at various ozone doses resulted in the reduction of total-organic carbon (TOC), COD, COD/TOC ratio, absorbance, color, and increase in the biochemical-oxygen demand (BOD)/COD ratio of the effluent. Further, ozonation of the anaerobically treated distillery effluent at an ozone dose of 2.08 mg/mg initial TOC and subsequent aerobic biodegradation resulted in 87.4% COD removal, as compared to 66% removal when ozonation was not used.     

Species Specificity of the Cytogenetic Stability of Fish in a Eutrophic Water Body

The micronucleus test of peripheral blood erythrocytes was used to study cytogenetic stability in bream (Abramis brama L.), perch (Perca fluviatilis L.), roach (Rutilus rutilus L.), and pike (Esox lucius L.) from a eutrophic water body not affected by anthropogenic factors. The dependence of the rate of spontaneous micronucleus formation on fish age was estimated. The effect of natural variation in abiotic environmental factors on the cytogenetic stability of species was analyzed.     

A MODELING APPROACH FOR OPTIMUM SEDIMENT DETENTION POND DESIGN1

ABSTRACT: A design procedure to determine optimum size for a sediment detention pond is presented. The procedure is based on simulating the sediment removal efficiency of the pond in conjunction with temporal variations in rainfall and potential land use and/or management options. The simulation procedure is based on a combined probabilistic-deterministic modeling approach. The probabilistic model generates daily rainfall with hourly increments for a selected site. The deterministic model simulates sediment yield and concentration for drainage area (pond inflow) and sediment trapping efficiency of the pond. The sediment yield and concentration in pond effluent is estimated from the difference between sediment inflow to the pond and sediment trapped by the pond. As an example, the procedure is applied to determine optimum design for a sediment detention pond in a surface mined area using several pond design options and alternative mining operation/land reclamation strategies.