CFD Prediction of Air Quality in the Area between Two City Vehicular Tunnels Considering Moving Cars

Concentration fields of different pollutants that spread outside two roadtunnels predicted with a CFD code will be presented. The solution domain represents the city area located between two tunnel outlets – tunnel Strahov and tunnel Mrazovka in Prague. The vicinity of both tunnels is a heavily built up area with tall buildings forming typical street canyons. The CFD modelling predicts the situation after the tunnel Mrazovka will be finished and traffic will increase considerably between both tunnels. Namely, an interest was given to the prediction of dispersion of emissions leaving both tunnel and the area touched by the traffic. For the CFD predictions, a method previously developed for moving vehicles was used. The method uses combination of Eulerian and Lagrangian approaches to moving objects and is capable of modeling different speeds and traffic rates of cars as well as traffic-induced turbulence. Influence of several meteorological parameters was studied, namely wind speed and direction and traffic parameters, like traffic rates and speed of cars. The method separates contributions from different sources to the total concentration field, namely from background, tunnel outlet and roadway. Results are presented in the form of horizontal and vertical concentration fields of NO_x.     

Interpretation of analytical data on n-alkanes and polynuclear aromatic hydrocarbons in Arbacia lixula from the coasts of Tenerife (Canary Islands, Spain) by multivariate data analysis

The hydrocarbons contents (n-alkanes, polycyclic aromatic hydrocarbons) were determined in the sea urchin Arbacia lixula. Multivariate data analysis as principal component analysis, factor analysis and, cluster analysis were applied to elucidate sources of pollution. PCA and FA were performed to establish the relationships between variables (hydrocarbons), samples (sea urchin) and sources of pollution.     

Interpretation of heavy metal data from mussel by use of multivariate classification techniques

Different strategies of multivariate analysis of metals concentrations (Mn, Fe, Ni, V, Co, Cu, Cd, Hg, Pb, Na, K) in mussel samples from different spanish markets are used to interpret a data base and identify differences between species and origin of the samples. Principal Component Analysis and Potential curves are applied to properly classify unknown samples from representative mussels samples (Mytilus edulis and Perna canaliculus). Also, Principal Components Analysis is used as display method to visualize the relation between the variables and objects of interest.     

Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.     

Differences in the effects of simulated sea aerosol on water relations, salt content, and leaf ultrastructure of rock-rose plants

White-leaf rock-rose (Cistus albidus L.) and Montpellier rock-rose (C. monspeliensis L.) plants were sprayed 2 to 3 min per day over a 7-d period, in an unheated plastic greenhouse, with different aqueous solutions containing deionized water alone (control); an anionic surfactant (sodium dodecylbenzenesulfonate 82.5%, 50 mg L(-1)) (S1); a solution simulating the composition of sea aerosol (S2); and a solution simulating sea aerosol with anionic surfactant (S3). White-leaf rock-rose was more sensitive to sea aerosol, showing greater leaf damage and markedly decreased growth, and the presence of surfactant enhanced the phytotoxic effect leading to greater increases in mortality. Montpellier rock-rose did not appear to be more adversely affected when surfactant was used in combination with sea aerosol, and manifested slight or less severe symptoms than white-leaf rock-rose. There was a significant increase in leaf turgor potential in the plants treated with both sea aerosol treatments by osmotic adjustment effect. The decrease in photosynthesis level seems to be due to both stomatal and nonstomatal factors. The results of microscopical analysis of Montpellier rock-rose plants show that sea aerosol treatment caused alterations in the chloroplast structure, reducing the starch grain and swelling the thylakoid membranes. The results of this study indicated that Montpellier rock-rose was more tolerant to sea aerosol than white-leaf rock-rose, showing a lower reduction in plant growth and less leaf damage, probably because of its ability to compartmentalize the toxic ions at the intracellular level.     

Environmental impact of unleaded gasolines in the bay of Cádiz (Spain)

Given the strategic situation of the José León de Carranza bridge, which spans the Bay of Cádiz (in the SW of Spain) and carries very heavy motor traffic, together with knowledge of the currents and tidal flows in the zone, we have used a technique of radioactive dating of sediments to study the temporal evolution presented by contamination from lead in the sediment column. This has allowed us to observe the environmental impact, in terms of the concentration of Pb in the sea bed sediments, that has been produced in the zone by the introduction of unleaded gasolines as substitutes for traditional automobile fuels that employ organic forms of tetra methyl lead as an antidetonant agent in the fuel.     

Assessment of contamination by heavy metals and petroleum hydrocarbons in sediments of Montevideo Harbour (Uruguay)

As part of the first environmental assessment within Montevideo Harbour, in summer and winter of 1998, sediments samples were collected at eight locations to determine the spatial distribution of anthropogenic pollutants. Muddy sediments with high organic matter content dominate the study area. Heavy metal levels indicated that sediments were highly polluted with Zn (overall mean: 312+/-102 microg g(-1) dry sediment), Pb (85+/-31), Cu (89+/-25), Cr (162+/-62), and Hg (0.63+/-0.3) and moderately with Ni (30+/-2) and Ag (1.2+/-0.4). Depending on location and season, aliphatic hydrocarbons reached from 21 to 120 microg g(-1), while the unresolved complex mixture represented up to 76% of the total aliphatic fraction. Total PAH concentrations ranged from 1.56 to 90.44 microg g(-1); except at one location, petroleum derivatives were identified as main local source. The results pointed out that almost all the harbour area presented some substances that can cause adverse biological effects, especially in the inner region where all metals are above PEL levels. Principal components analysis confirmed that the inner harbour region is most severely affected by the pollutants and it was possible to differentiate three regions according to their environmental quality.     

Uranium-238 and thorium-232 series concentrations in soil, radon-222 indoor and drinking water concentrations and dose assessment in the city of Aldama, Chihuahua, Mexico

High-resolution gamma spectrometry was used to determine the concentration of 40K, 238U and 232Th series in soil samples taken from areas surrounding the city of Aldama, in Chihuahua. Results of indoor air short-time sampling, with diffusion barrier charcoal detectors, revealed relatively high indoor radon levels, ranging from 29 to 422 Bq/m3; the radon concentrations detected exceeded 148 Bq/m3 in 76% of the homes tested. Additionally, liquid scintillation counting showed concentrations of radon in drinking water ranging from 4.3 to 42 kBq/m3. The high activity of 238U in soil found in some places may be a result of the uranium milling process performed 20 years ago in the area. High radon concentrations indoor and in water may be explained by assuming the presence of uranium-bearing rocks underneath of the city, similar to a felsic dike located near Aldama. The estimated annual effective dose of gamma radiation from the soil and radon inhalation was 3.83 mSv.     

Biowaste effects on soil and native plants in a semiarid ecosystem

Many soils of the Mediterranean region with a semiarid climate are subjected to progressive degradation as a result of water erosion. Biosolids and municipal solid wastes (MSW) were surface-applied once at three rates (40, 80, and 120 Mg ha(-1)) to different plots in a degraded semiarid ecosystem. The study was conducted to determine the effects of such applications on soil chemical properties and native vegetation over a three-year period. Soil N, P, and K initially increased with increasing biowaste application rates, but then decreased over time. Levels of Zn and Cu were higher in MSW than biosolid-treated plots, and increased in both years after application. Concentrations of soil Cd, Pb, Ni, and Cr did not change as a result of biowaste amendment in the study period. The growth of native plants was enhanced by the addition of biowastes. Total plant canopy and plant biomass increased significantly and remained higher in all treatments than in the control plot over the three-year period. The species richness of native plants decreased with increasing biowaste rates. Differences in the development of native plant communities between treatments were observed, and were more remarkable three years after biowaste application. Tissue N, P, K, Zn, and Cu levels increased with the biowaste application rate, but concentrations of tissue Pb, Cd, Ni, and Cr did not increase significantly. Biowastes applied at the rate of 80 Mg ha(-1) gave rise to the most favorable soil and native vegetation results while avoiding environmental risks.     

Landform Classification for Land Use Planning in Developed Areas: An Example in Segovia Province (Central Spain)

Landform-based physiographic maps, also called land systems inventories, have been widely and successfully used in undeveloped/rural areas in several locations, such as Australia, the western United States, Canada, and the British ex-colonies. This paper presents a case study of their application in a developed semi-urban/suburban area (Segovia, Spain) for land use planning purposes. The paper focuses in the information transfer process, showing how land use decision-makers, such as governments, planners, town managers, etc., can use the information developed from these maps to assist them. The paper also addresses several issues important to the development and use of this information, such as the goals of modern physiography, the types of landform-based mapping products, the problem of data management in developed areas, and the distinctions among data, interpretations, and decisions.