Occurrence and distribution of trifluralin,ethalfluralin, and pendimethalin in soils used for long-term intensive cotton cultivation in central Greece

In the present study, a soil monitoring program was undertaken in Greek cotton cultivated areas in 2012. Twenty-seven soil samples were collected from the entire Thessaly plain in early summer of 2012, corresponding to approximately three months (current use of pendimethalin), up to one year (for the banned ethalfluralin), and three years (for the also banned trifluralin), after the last dinitroaniline application. Low but not negligible levels of dinitroanilines were detected, ranging from 0.01 to 0.21 μg g^?1 d.w. for trifluralin and 0.01–0.048 μg g^?1 d.w. for pendimethalin, respectively. Trifluralin was the herbicide most frequently detected (44.4%). The high historic application of trifluralin and its high persistence and accumulation potential is in line with the abundance of the detected residues. The present data indicate that soil samples contain extractable residues of banned trifluralin, but based on the comparison of the theoretical PECplateau for trifluralin (0.277 µg g^?1) and the maximum Measured Environmental Concentration, it was concluded that the detected residues should be attributed to previous years’ application. The latter suggested the need for continual monitoring of the dinitroaniline family of pesticides, including the banned substances, aiming thus to an improved environmental profile for agricultural areas.     

LC-MS/MS determination of pesticide residues in fruits and vegetables

The aim of the research is to evaluate pesticide residue contamination of fresh and frozen fruits and vegetables, agricultural raw material, purchased from Polish farmers for production of frozen fruits and vegetables, and the estimation of the multiresidue method effectiveness expressed as the proportion of pesticides detected in food samples to the total number of pesticides analyzed by multiresidue methods. A total of 144 samples (of black currants, red currants, raspberries, cherries, strawberries, blackberries, cauliflowers and broccoli) were analyzed using LC-MS/MS method for the determination of 60 pesticides. QuEChERS extraction, matrix-matched calibration and dynamic multiple reaction monitoring method were used. Residues of 15 compounds, mainly fungicides and insecticides, were detected in 46 samples. The percentage of samples with residues above the maximum residue levels (MRL) was 15%, whereas samples with residues below MRL were 17%. A total of 13 samples contained more than one pesticide residue. Pesticide residues were detected most often in samples of black currants (50%), broccoli (36.4%), raspberries (29%) and red currants (21.8%). The most frequently detected pesticides were carbendazim and acetamiprid. The proportion of pesticides detected during our study to the total number of analyzed pesticides amounted to 25%. It was compared to literature findings. For three fourth of multiresidue methods, the proportion was below 50% for methods developed for the analysis of less than 100 pesticides, and below 30% for methods developed for the analysis of more than 100 pesticides. It appears that a lot of efforts and means is lost on pesticides never or rarely detected in examined samples. The workload and cost effectiveness of the development and application of multiresidue methods along with the range of pesticides covered by the method should be carefully and thoroughly considered anytime when a new method or workflow is developed. Including non-targeted screenings in pesticide residue control seems to be an alternative worth considering.     

Renewable energy sources: conflicts and opportunities in a changing landscape

Regional Environmental Change - Replacement of conventional energy sources with renewables such as solar panels and wind turbines requires adequate land. Impact assessments should be conducted to...     

How dynamics and drivers of land use/land cover change impact elephant conservation and agricultural livelihood development in Rombo,Tanzania

Land use/land cover (LULC) change affects the provision of ecosystem services for humans and habitat for wildlife. Hence, it is crucial to monitor LULC particularly adjacent to protected areas. In this study, we measured LULC change in Rombo, Tanzania, an area with high-potential agro-ecological zones that is dominated by human–elephant conflicts (HECs). We used remote sensing and geographical information system techniques, questionnaires and village meetings to assess spatio-temporal patterns of the LULC changes in the study area. Using Landsat imagery, digital elevation model (DEM) and ground truthing, we classified and monitored changes in LULC from the years 1987 to 2015. We found that within Rombo, settlements were increasing, while agricultural and agroforestry lands were decreasing and respondents’ perceptions varied along the altitudinal gradient. Patterns of HEC and LULC were observed to change along the gradient and the later threatened the agricultural land and ecological integrity for elephant habitat, leading to high tension and competition between elephants and people. This research offers baseline information for land use planning to balance wildlife conservation with livelihood development in Rombo and highlights that managing the impacts of LULC changes on HEC and elephant habitat loss is a matter of urgency.     

Current Levels and Management of Solid Wastes in Nigeria

Solid waste is of serious concern in developing countries because of its high rate of generation and the low‐end quality of its management. Inefficient handling of solid wastes may result in deterioration of environmental quality, but it can also result in loss of potential resources. This study reviews current solid waste generation and management in Nigeria and the need for an effective collection, recovery, and recycling policy. Our review is based on literature searches and personal field surveys. Observations showed that uncontrolled electronic waste (e‐waste), agricultural‐waste (agro‐waste), scrap metals, waste polymers, and waste from the transportation sector are prevalent in Nigeria. Recent collection rates were less than 50% of the total solid waste generated (i.e., approximately 40% was collected). With an effective collection system and appropriate policies, the abundance of solid waste in the country could present material recovery and recycling opportunities that would boost the economy and move Nigeria closer to sustainable resource management.     

Voice,power, and history: ensuring social justice for all stakeholders in water decision-making

Public participation in water decision-making is an accepted and expected practice. It is expected to lead to better decisions and ensure fairness by satisfying peoples' understanding of democracy and their “right” to participate in decisions that affect them. However, despite years of experience and “best practices”, governing bodies at all levels struggle to implement successful, genuine participation that leads to fair decisions. Ultimately, decision-making about natural resources such as water is a process that takes place in a wider power context where some groups have greater access to sources of power and entitlements. This research applies a “Social Justice Framework” (SJF) to examine the experiences of different stakeholder groups in making their voices heard during water reform processes in the Murray–Darling Basin in Australia. The experiences of croppers and graziers in two different floodplains show how historical advantages and disadvantages affect the power balance between different stakeholder groups and their ability to participate in and influence water decision-making. Applying the three components of the SJF, distributive, procedural and interactive justice, in water decision-making should lead to greater equity in distribution and underline the importance of good governance in decision-making processes.     

Cost‐Effective Sediment Dredge Disposal Options for Small Craft Harbors in Canada

Sediment dredge disposal options were reviewed to improve cost‐effectiveness and environmental safety for dredging of coastal sediments at the Department of Fisheries and Oceans Small Craft Harbours (DFO‐SCH) program in Canada. Historically, contaminated dredge sediments exceeding federal guidelines were disposed of in nearby landfills. Recent federal regulatory changes in sediment quality guidelines adopted by provincial regulators in Canada has resulted in updates to guidelines for disposal of contaminated solids in landfills. Updates now require specific and general disposal options for contaminated dredge material destined for land‐based disposal, resulting in more expensive disposal in containment cells (if contaminated sediments exceed federal guidelines). However, as part of this study, a leachate testing method was applied to contaminated sediments to simulate migration of potential contaminants in groundwater. Using this approach, leachate quality was compared to federal freshwater criteria and drinking water quality guidelines for compliance with new regulations. Leachate testing performed on the highest sediment contaminant concentrations triggered less than 2 percent potable water exceedances, meaning that most dredge spoils could be disposed of in privately owned or provincially operated landfill sites, providing less expensive disposal options compared to containment cell disposal. Current dredge disposal practices were reviewed at 35 harbor sites across Nova Scotia and their limitations identified in a gap analysis. Improved site management was developed following this review and consultation with interested marine stakeholders. New disposal options and chemical analyses were proposed, along with improvements to cost efficiencies for management of dredged marine sediments in Atlantic Canada. © 2013 Wiley Periodicals, Inc.     

Enhanced science–stakeholder communication to improve ecosystem model performances for climate change impact assessments

In recent years, climate impact assessments of relevance to the agricultural and forestry sectors have received considerable attention. Current ecosystem models commonly capture the effect of a warmer climate on biomass production, but they rarely sufficiently capture potential losses caused by pests, pathogens and extreme weather events. In addition, alternative management regimes may not be integrated in the models. A way to improve the quality of climate impact assessments is to increase the science–stakeholder collaboration, and in a two-way dialog link empirical experience and impact modelling with policy and strategies for sustainable management. In this paper we give a brief overview of different ecosystem modelling methods, discuss how to include ecological and management aspects, and highlight the importance of science–stakeholder communication. By this, we hope to stimulate a discussion among the science–stakeholder communities on how to quantify the potential for climate change adaptation by improving the realism in the models.     

Total and Methylmercury in Soft Tissues of White-Tailed Eagle (Haliaeetus albicilla) and Osprey (Pandion haliaetus) Collected in Poland

Mercury (Hg) contamination in piscivorous birds, especially methylmercury (MeHg), has been drawing much attention worldwide in regard to its bioaccumulation and biomagnification in food chains. In this study on Hg in the soft tissues of white-tailed eagles (n = 22) and ospreys (n = 2) from Poland, total Hg (THg) range was 0.15–47.6 while MeHg range was 0.11–8.05 mg kg⁻¹ dry weight. In both species, median THg and MeHg concentrations were lower in the muscle and brain than in the liver and kidney. Median nephric residues were just under 3 and 5 mgTHg kg⁻¹ or 0.9 and 3.7 mgMeHg kg⁻¹ for white-tailed eagle and osprey, respectively. In Norwegian data from the 1970s and in our results, MeHg in the muscle of white-tailed eagle was ~60 % THg (%MeHg = MeHg/THg × 100), lower than in other piscivorous birds. A clear similarity in THg tissue levels was found between Polish and German populations of white-tailed eagles.     

Metal uptake capacity of modified Saccharomyces pastorianus biomass from different types of solution

In this paper, we investigate the effect of different biomass pretreatments on metal ion uptake by various biosorbents. Heat-treated as well as caustic-treated and ground biomass of Saccharomyces pastorianus was used to remove copper, lead and cadmium from various solutions. Untreated yeast was used as the control sample. The effect of yeast modification on sorption capacity depended on the different types of heavy metal ions and whether they were in single- or multi-component solutions. The highest uptake of copper and lead from a single-metal solution was obtained from heat-treated cells. Ground biomass was the most efficient at cadmium removal. However, the sorption capacity of the modified biomass did not improve when metal ions were removed from multi-component solutions. Indeed, the results in this paper show that optimizing metal removal from single-cation solutions can lead to decreased sorption capacity in multi-component solutions. Therefore, while adjusting the procedure of biomass modification, not only the nature of the metal ion being sorbed but also the chemical composition of the metal ion solution should be taken into account.