Synthesis of linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite as an adsorbent for removal of Pb(Ⅱ) from aqueous solutions

The purpose of this work is to remove Pb(II) from the aqueous solution using a type of hydrogel composite. A hydrogel composite consisting of waste linear low density polyethylene, acrylic acid, starch, and organo-montmorillonite was prepared through emulsion polymerization method. Fourier transform infrared spectroscopy (FTIR), Solid carbon nuclear magnetic resonance spectroscopy (CNMR)), silicon^-29 nuclear magnetic resonance spectroscopy (Si NMR)), and X-ray diffraction spectroscope ((XRD) were applied to characterize the hydrogel composite. The hydrogel composite was then employed as an adsorbent for the removal of Pb(II) from the aqueous solution. The Pb(II)-loaded hydrogel composite was characterized using Fourier transform infrared spectroscopy (FTIR)), scanning electron microscopy (SEM)), and X-ray photoelectron spectroscopy ((XPS)). From XPS results, it was found that the carboxyl and hydroxyl groups of the hydrogel composite participated in the removal of Pb(II). Kinetic studies indicated that the adsorption of Pb(II) followed the pseudo-second-order equation. It was also found that the Langmuir model described the adsorption isotherm better than the Freundlich isotherm. The maximum removal capacity of the hydrogel composite for Pb(II) ions was 430 mg/g. Thus, the waste linear low-density polyethylene-g-poly (acrylic acid)-co-starch/organo-montmorillonite hydrogel composite could be a promising Pb(II) adsorbent.     

A Gender Sensitive Analysis Towards Organic Agriculture: A Structural Equation Modeling Approach

This study integrates the motivating and challenging elements impacting on the implementation of organic farming practice in Iran. Analysis was based on the results of two surveys; one from organic farmers to determine motivating factors and the other from experts in organic farming to identify challenging factors. These surveys incorporated a gender perspective to enable gender comparison and analysis of the results presents a practical model to support program developers in Iranian organic agriculture. Gender comparison indicated that attitudes among farmers to organic agriculture were slightly variable according to gender; while experts’ attitudes to organic agriculture remained constant and were not influenced by gender. The practical model ranked motivating factors as husbandry, financial, health-quality of life, general and personal; and challenging factors as financial, legal, educational, and technical. Finally, several suggestions are made according to these findings.     

Anthropometric hand dimensions in a population of Iranian male workers in 2012

Background. The mismatch between the hand size of workers and the size of industrial instruments is a growing concern; it can lead to various musculoskeletal complications. Currently, there are few reliable studies available to address this concern in Iran. This study was conducted to measure 30 upper-extremity parameters in a group of Iranian industrial workers. Methods. This study is a cross-sectional study on 529 workers. The study population was randomly selected from male Iranian industrial workers who were referred to the Yazd hospital occupational medicine clinic for surveillance evaluations. Results. The M (SD) age of the participants was 30.13 (8.29) years. Statistical analysis was performed using the mean, standard deviation and 5th, 50th and 90th percentiles for each measured hand dimension. A considerable number of dimensions were significantly different between the measurements of right and left hands in each examinee. The results showed significant differences between Iranian hand size and that of other populations. Conclusion. This study provided a valuable databank of hand dimensions in a population of Iranian male workers. These data can be used by manufacturers in designing high-quality hand-tools and industrial gloves, taking into consideration Iranian worker characteristics.     

Female tactile cues maximize paternal behavior in prairie voles

Most monogamous male mammals display parental care, but the mechanism by which they become motivated to care for infants remains unknown. We used prairie voles (Microtus ochrogaster) as a model of biparental species to test the hypothesis that physical contact with a female enhances male parental responsiveness before the birth of offspring. We tested four groups of males: mated with physical contact with their mate, mated with only distal cues from their mate, mated with no cues, and unmated with distal cues from a female. The subjects were placed in an oversized cage divided into two compartments by a perforated barrier. At mid-gestation, the bedding and females were removed, and the males’ responses toward two infants were videotaped. Although most males behaved parentally, mated males exposed to their mate’s tactile or distal cues approached the young faster and were more likely to care for both infants than unmated males which received female distal cues. Males who had physical contact with their mate showed “kyphosis” (a crouching position over infants) and contacted infants more frequently than mated males which received no cues from their mate or unmated males which received female distal cues. Furthermore, the frequency of non-social behaviors was lowest in mated males that had physical contact with their mate. The data suggest that exposure to female distal cues after mating is sufficient to increase male parental attentiveness, but female somatosensory cues affect the male's tendency to remain in physical contact with infants.     

Euphorbia leaf extract-assisted sustainable synthesis of Au NPs supported on exfoliated GO for superior activity on water purification: reduction of 4-NP and MB

Environmental Science and Pollution Research - In the present work, the effect of graphene oxide (GO) architecture and synthesis of gold nanoparticles (AuNPs) on the surface of GO by using...     

A comparative study of trace metals in male and female Caspian kutum (<Emphasis Type="Italic">Rutilus frisii kutum</Emphasis>) from the southern basin of Caspian Sea

This study focuses on the extent of zinc (Zn), copper (Cu), cadmium (Cd), cobalt (Co), manganese (Mn), lead (Pb), mercury (Hg), and arsenic (As) bioaccumulation in edible muscles of Caspian kutum (Rutilus frisii kutum), in both male and female sexes at Noor and Babolsar coastal regions from the southern basin of Caspian Sea. These values were compared with the WHO and the UNFAO safety standards regarding the amount of the abovementioned heavy metals in fish tissues (mg/kg ww). Results showed that the accumulation of these elements (except for Zn) was not significantly different between sexes of male and female in Babolsar coastal regions (P?>?0.05). In the other hand, accumulation of Hg and As at edible muscles of Caspian kutum has significant difference between two sexes of male and female in Noor coastal regions (P?<?0.05), the female had higher concentration than the male. Furthermore, it was not significantly correlated with sex and rivers in length and weight of fish (R ²?<?0.50; P?>?0.05). Based on the results, the concentration of heavy metals in the studied fish tissues proved to be significantly lower than international standards (P?<?0.05), so its consumption is not a threat to the health of consumers.     

Pseudomonas sp. (Strain 10–1B): A potential inoculum candidate for green and sustainable remediation

Soil pollution caused by polycyclic aromatic hydrocarbons (PAHs) is a consequence of various industrial processes which destabilizes the ecosystem. Bioremediation by bacteria is a cost‐effective and environmentally safe solution for reducing or eliminating pollutants in soils. In the present study, we artificially polluted agricultural soil with used automobile engine oil with a high PAH content and then isolated bacteria from the soil after 10 weeks. Pseudomonas sp. strain 10–1B was isolated from the bacterial community that endured this artificial pollution. We sequenced its genomic DNA on Illumina MiSeq sequencer and evaluated its ability to solubilize phosphate, fix atmospheric nitrogen, and produce indoleacetic acid, in vitro, to ascertain its potential for contribution to soil fertility. Its genome annotation predicted several dioxygenases, reductases, ferredoxin, and Rieske proteins important in the ring hydroxylation initiating PAH degradation. The strain was positive for the soil fertility attributes evaluated. Such combination of attributes is important for any potential bacterium partaking in sustainable bioremediation of PAH‐polluted soil.     

The effect of artificial smoke compound on physiological responses,cognitive functions and work performance during firefighting activities in a smoke-diving room: an intervention study

This study investigated the combined effect of firefighting operations and exposure to smoke on physiological responses, cognitive functions and physical performance among firefighters. Each firefighter was engaged in two experimental conditions: (a) without artificial smoke, control (NS); (b) with artificial smoke (WS). The results of data analysis revealed that heart rate and body temperature increased significantly after the firefighting activities in the two conditions relative to baseline. In addition, reaction time (RT) and correct response (CR) decreased after the activity relative to baseline and there was a significant difference in RT and CR between the NS and WS conditions. There was also a significant difference in performance time between the NS and WS conditions. These findings demonstrated that a smoke compound has an insignificant effect on physiological responses during firefighting activity. On the contrary, the smoke compound has a detrimental influence on cognitive and physical performance.     

Thermodynamic analysis of metals recycling out of waste printed circuit board through secondary copper smelting

Journal of Material Cycles and Waste Management - In this paper, a detailed thermodynamic analysis of processing of electronic waste (e-waste), particularly printed circuit boards (PCB), through...