Polycyclic aromatic hydrocarbons (PAHs) in the aerosol in Beijing, China, measured by aminopropylsilane chemically-bonded stationary-phase column chromatography and HPLC/fluorescence detection

We developed a useful analytical method for the determination of polycyclic aromatic hydrocarbons (PAH) concentrations in the aerosol of China. We used an accelerated solvent extraction (ASE) method for the extraction of PAHs from the aerosol samples, in order to reduce the extraction time and the solvent volume used. The optimum purification method was developed, with aminopropylsilane chemically-bonded stationary-phase column chromatography, in order to remove many co-extractives which cannot be removed by conventional purification methods using silica-gel column chromatography. HPLC/fluorescence detection (FLD) was adopted as the analytical method, because it has very high sensitivity to PAH and it is easy to install, operate, and maintain as compared with GC/MS. With the analytical method developed in this study, the recovery and precision (RSD) for most of the PAHs ranged from 75% to 129% and from 2.8% to 22.7%, respectively. The concentrations of PAHs in the aerosol samples collected from October 2003 to April 2005 in Beijing, China were determined using the newly developed method. SigmaPAHs, which is the sum of the concentrations of all detected PAHs, was 177.8 +/- 239.9 ng m(-3) (n = 64). The SigmaPAHs concentration in the heating season (305.1 +/- 279.0 ng m(-3), n = 33) was 7.2 times higher than that in the non-heating season (42.3 +/- 32.0 ng m(-3), n = 31). These strong seasonal variations in atmospheric PAH concentration are possibly due to coal combustion for residential heating in winter.     

Kinetics on the decomposition of polychlorinated biphenyls with activated carbon-supported iron

The process of destroying polychlorinated biphenyls (PCBs) generates exhaust gases that contain low quantities of PCBs, which cannot be disposed of easily. Activated carbon (AC) can be used to adsorb residual PCBs after disposal of high-level PCBs. We examined the chemical reactivity of AC-supported iron as a catalyst to decompose PCB-153, and varied three decomposition parameters (temperature, time and iron concentration) under an atmosphere of either air or N(2). We measured the Brunauer-Emmett-Teller (BET) surface area and pore volume of AC to assess the adsorption capacity of AC before and after decomposition. At low temperatures the adsorption process was more important than the decomposition process. The decomposition process was completed within 30 and 60 min under air and N(2), respectively. The efficiency of PCB-153 decomposition at 350 degrees C for 120 min was approximately 100.0% and 97.1% under air and N(2), respectively. Analysis of inorganic chloride ions revealed that PCB-153 was effectively destroyed during decomposition. The differences between decomposition under air and N(2) reflected differences in BET surface and pore volume.     

Humic-like substances global levels and extraction methods in aerosols

Environmental Chemistry Letters - The abundance of humic-like substances in the atmosphere has received considerable attention since these substances play an important role in various atmospheric...     

Why do municipalities accept disaster waste? Evidence from the great east Japan earthquake

Environmental Economics and Policy Studies - Municipalities’ cooperation is critical for successful policy interventions for disaster recovery. Using a spatial econometric model, we...     

Airborne hydrophilic microplastics in cloud water at high altitudes and their role in cloud formation

Microplastic pollution is occurring in most ecosystem, yet their presence in high altitude clouds and their influence on cloud formation and climate change are poorly known. Here we analyzed microplastics in cloud water sampled at the summits of Japan mountains at 1300–3776 m altitude by attenuated total reflection imaging and micro-Fourier transform infrared spectroscopy. We observed nine microplastics including polyethylene, polypropylene, polyethylene terephthalate, polymethyl methacrylate, polyamide 6, polycarbonate, ethylene–propylene copolymer or polyethylene–polypropylene alloy, polyurethane, and epoxy resin. Microplastic were fragmented, with mean concentrations ranging from 6.7 to 13.9 pieces per liter, and with Feret diameters ranging from 7.1 to 94.6 μm. Microplastics bearing hydrophilic groups such as carbonyl and/or hydroxyl groups were abundant, suggesting that they might have acted as condensation nuclei of cloud ice and water. Overall, our finding suggest that high-altitude microplastics cloud influence cloud formation and, in turn, might modify the climate.

     

Aqueous leaching of cattle manure incineration ash to produce a phosphate enriched fertilizer

Ash produced from the combustion of livestock manure contains large amounts of phosphorus (P), which is an important resource as a fertilizer. Some studies have extracted and recovered P from incinerated biomass ash using inorganic acid or alkaline agents, which produce wastewater that requires treatment and is expensive due to the cost of chemicals. Livestock manure ash contains not only P, but also water soluble salts, which could be a negative influence on plant growth and shall be preferably removed from the recovered fertilizer. In this study, we removed salinity from cattle manure incineration ash by simple aqueous leaching, while retaining the P content. The optimal condition was a 20 min leaching time at a liquid/solid (L/S) ratio of 10 mL g-ash^?1. Under this condition, over 90 % of Cl and 20 % of Na in the original ash was removed, while over 99 % of the P was retained in the leached residue. The leached residue met the fertilizer standard in Japan in terms of citrate soluble fertilizer components and contained few heavy metals. X-ray analyses of the ash indicated that Cl was mainly present as KCl in the original ash, while P was mainly present as Ca compounds in the ash.     

Examination of in vivo mutagenicity of sodium arsenite and dimethylarsinic acid in gpt delta rats

Arsenic is a well-known human bladder and liver carcinogen, but its exact mechanism of carcinogenicity is not fully understood. Dimethylarsinic acid(DMAV) is a major urinary metabolite of sodium arsenite(i As~Ⅲ) and induces urinary bladder cancers in rats. DMAVand i As~Ⅲare negative in in vitro mutagenicity tests. However, their in vivo mutagenicities have not been determined. The purpose of present study is to evaluate the in vivo mutagenicities of DMAVand i As~Ⅲin rat urinary bladder epithelium and liver using gpt delta F344 rats.Ten-week old male gpt delta F344 rats were randomized into 3 groups and administered 0,92 mg/L DMAV, or 87 mg/L i As~Ⅲ(each 50 mg/L As) for 13 weeks in the drinking water. In the mutation assay, point mutations are detected in the gpt gene by 6-thioguanine selection(gpt assay) and deletion mutations are identified in the red/gam genes by Spi-selection(Spi-assay). Results of the gpt and Spi-assays showed that DMAVand i As~Ⅲhad no effects on the mutant frequencies or mutation spectrum in urinary bladder epithelium or liver. These findings indicate that DMAVand i As~Ⅲare not mutagenic in urinary bladder epithelium or liver in rats.     

The adoption of a Climate Disaster Resilience Index in Chennai,India

Results derived from the Climate Disaster Resilience Index (CDRI)—consisting of five dimensions (economic, institutional, natural, physical, and social), 25 parameters, and 125 variables—reflect the abilities of people and institutions to respond to potential climate‐related disasters in Chennai, India. The findings of this assessment, applied in the 10 administrative zones of the city, reveal that communities living in the northern and older parts of Chennai have lower overall resilience as compared to the flourishing areas (vis‐à‐vis economic growth and population) along the urban fringes. The higher resilience of communities along the urban fringes suggests that urbanisation may not necessarily lead to a deterioration of basic urban services, such as electricity, housing, and water. This indication is confirmed by a strong statistical correlation between physical resilience and population growth in Chennai. The identification of the resilience of different urban areas of Chennai has the potential to support future planning decisions on the city's scheduled expansion.