Development and Validation of the Total HUman Model for Safety (THUMS) Toward Further Understanding of Occupant Injury Mechanisms in Precrash and During Crash

Objective: Active safety devices such as automatic emergency brake (AEB) and precrash seat belt have the potential to accomplish further reduction in the number of the fatalities due to automotive accidents. However, their effectiveness should be investigated by more accurate estimations of their interaction with human bodies. Computational human body models are suitable for investigation, especially considering muscular tone effects on occupant motions and injury outcomes. However, the conventional modeling approaches such as multibody models and detailed finite element (FE) models have advantages and disadvantages in computational costs and injury predictions considering muscular tone effects. The objective of this study is to develop and validate a human body FE model with whole body muscles, which can be used for the detailed investigation of interaction between human bodies and vehicular structures including some safety devices precrash and during a crash with relatively low computational costs.

Methods: In this study, we developed a human body FE model called THUMS (Total HUman Model for Safety) with a body size of 50th percentile adult male (AM50) and a sitting posture. The model has anatomical structures of bones, ligaments, muscles, brain, and internal organs. The total number of elements is 281,260, which would realize relatively low computational costs. Deformable material models were assigned to all body parts. The muscle–tendon complexes were modeled by truss elements with Hill-type muscle material and seat belt elements with tension-only material. The THUMS was validated against 35 series of cadaver or volunteer test data on frontal, lateral, and rear impacts. Model validations for 15 series of cadaver test data associated with frontal impacts are presented in this article. The THUMS with a vehicle sled model was applied to investigate effects of muscle activations on occupant kinematics and injury outcomes in specific frontal impact situations with AEB.

Results and Conclusions: In the validations using 5 series of cadaver test data, force–time curves predicted by the THUMS were quantitatively evaluated using correlation and analysis (CORA), which showed good or acceptable agreement with cadaver test data in most cases. The investigation of muscular effects showed that muscle activation levels and timing had significant effects on occupant kinematics and injury outcomes. Although further studies on accident injury reconstruction are needed, the THUMS has the potential for predictions of occupant kinematics and injury outcomes considering muscular tone effects with relatively low computational costs.     

Formation of chloroform and carbon tetrachloride in foods treated with sodium hypochlorite

The formation of chloroform and carbon tetrachloride during the treatment of fresh vegetable homogenate with sodium hypochlorite was studied.When a n-hexane extract of the reaction mixture of fresh vegetables and sodium hypochlorite was analysed by gas chromatography, chloroform and carbon tetrachloride were detected, and many unidentified peaks were also observed. The formation conditions of chloroform and carbon tetrachloride were studied. The mechanism of chloroform formation may be different from that of carbon tetrachloride according to the study of pH on the formation of both compounds. The formation of chloroform is much greater than that of carbon tetrachoride.     

Metabolism of potassium bromate in rats II. In vitro studies

To learn more about the biodegradation of potassium bromate, the decomposition of bromate in various tissues of rats was studied. Bromate was degraded very slowly in human saliva and plasma of rat. However, nearly all tissue homogenates and red blood cells could degrade bromate by a mechanism which exhibited some stability to heat. Furthermore, it was suggested that the bromate degradation active component in the supernatant fraction of a liver homogenate was in part glutathione.     

Development of a three-year-old child FE model

OBJECTIVE: Child crash dummies are conventionally used for safety performance evaluations of the child restraint system (CRS) in vehicle crash tests. To investigate injuries to various body regions of a child in detail, mathematical models are useful, and provide information that cannot be analyzed by crash dummies. Therefore, in the present research, a finite element (FE) model of a 3-year-old child has been developed by model-based scaling from the AM50 human FE model, THUMS (Total HUman body for Safety). METHODS: The dimensions of each body region were based on the anthropometry data of United States children, and material properties of child bone were estimated from data reported in the literature. Neck flexion, thorax impact responses, and torso flexion were validated against the response corridor of the 3-year-old Hybrid III dummy in calibration tests. A test of lap belt loading to the abdomen was also conducted. FE models of two different types of CRS, a 5-point harness and a tray shield CRS, were also made, and ECE R44 sled impact test simulations were conducted using the child FE model. RESULTS: The characteristics of the child FE model proved to be close to the Hybrid III and child volunteer corridor. In the ECE R44 sled test simulations using the child FE model, the head movement down and head rotation were large in the 5-point harness CRS, and chest deflection was large in the tray shield CRS. In both CRS types, the whole spine flexed in the child FE model. This behavior is different from that of the Hybrid III, where the thorax spine is stiff and only the cervical spine and lumbar spine flex. CONCLUSIONS: Although this child FE model has several limitations in areas such as the anatomical shapes and material properties of a child, this model can be a useful tool to examine the behavior of a child in impacts, which may be difficult to predict by using the Hybrid III dummy with its stiff thorax spine box.     

Influence of chemical characteristics of humic substances on the partition coefficient of a chlorinated dioxin

The partition coefficients (Koc) of 1,2,3,4,6,7,8-heptachlorodibenzo-p-dioxin (HpCDD) with respect to a variety of humic substances (HSs) were evaluated by a method involving solid-phase microextraction and gas chromatography-electron capture detection. The log Koc values for each of the HS samples were in the range of 6.4-7.7. The log Koc values for HAs from tropical peat, brown forest and ando soils were in the range of 7.3-7.6, similar to the calculated value for the octanol-water partition coefficient (log Koc=7.56). In contrast, the log Koc values for FAs and peat HAs were 0.5-1 unit lower than the calculated value. The parameters for the polarity of HSs, as calculated from (N+O)/C, O/C atomic ratios and the carboxyl group content, were numerically similar related to the log Koc for HpCDD. These results show that the Koc values for HpCDD are significantly influenced by the polarity of HSs.     

On the Estimation of Dispersal Kernels from Individual Mark-Recapture Data

We present a new method for estimating a distribution of dispersal displacements (a dispersal kernel) from mark-recapture data. One conventional method of calculating the dispersal kernel assumes that the distribution of displacements are Gaussian (e.g. resulting from a diffusion process) and that individuals remain within sampled areas. The first assumption prohibits an analysis of dispersal data that do not exhibit the Gaussian distribution (a common situation); the second assumption leads to underestimation of dispersal distance because individuals that disperse outside of sampling areas are never recaptured. Our method eliminates these two assumptions. In addition, the method can also accommodate mortality during a sampling period. This new method uses integrodifference equations to express the probability of spatial mark-recapture data; associated dispersal, survival, and recapture parameters are then estimated using a maximum likelihood method. We examined the accuracy of the estimators by applying the method to simulated data sets. Our method suggests designs for future mark-recapture experiments. Received: January 2004 / Revised: July 2005     

Fine and ultrafine particle-and gas-polycyclic aromatic hydrocarbons affecting southern Thailand air quality during transboundary haze and potential health effects

Distribution of PM_0.1,PM₁and PM_2.5particle-and gas-polycyclic aromatic hydrocarbons(PAHs) during the 2019 normal,partial and strong haze periods at a background location in southern Thailand were investigated to understand the behaviors and carcinogenic risks PM₁was the predominant component,during partial and strong haze periods,accounting for 45.1%and 52.9%of total suspended particulate matter,respectively,while during nor mal period the contribution...     

Characterization of the genes involved in nitrogen cycling in wastewater treatment plants using DNA microarray and most probable number-PCR

To improve nitrogen removal performance of wastewater treatment plants (WWTPs), it is essential to understand the behavior of nitrogen cycling communities, which comprise various microorganisms. This study characterized the quantity and diversity of nitrogen cycling genes in various processes of municipal WWTPs by employing two molecular-based methods:most probable number-polymerase chain reaction (MPN-PCR) and DNA microarray. MPN-PCR analysis revealed that gene quantities were not statistically different among processes, suggesting that conventional activated sludge processes (CAS) are similar to nitrogen removal processes in their ability to retain an adequate population of nitrogen cycling microorganisms. Furthermore, most processes in the WWTPs that were researched shared a pattern:the nirS and the bacterial amoA genes were more abundant than the nirK and archaeal amoA genes, respectively. DNA microarray analysis revealed that several kinds of nitrification and denitrification genes were detected in both CAS and anaerobic-oxic processes (AO), whereas limited genes were detected in nitrogen removal processes. Results of this study suggest that CAS maintains a diverse community of nitrogen cycling microorganisms; moreover, the microbial communities in nitrogen removal processes may be specific.

Open image in new window

     

Evaluation of the toxicity of tetrabromobisphenol A and some of its oxidation products using a micro-scale algal growth inhibition test

A micro-scale algal growth inhibition (μ-AGI) test using a common micro-plate based fluorometric detection was used to demonstrate the effects of humic substances (HSs) on the toxicity of tetrabromobisphenol A (TBBPA) and its oxidative decomposition products 2,5-dibromo-1,4-benzoquinone (2,5-DBBQ), 2,5-dibromohydroquinone (2,5-DBHQ), 2,6-dibromobenzoquinone (2,6-DBBQ), and 2,6-dibromophenol (2,6-DBP) to Pseudokirchneriella subcapitata. The EC₅₀ values were: EC_50(TBBPA) = 7 mg L^?1, EC_50(2,5-DBHQ) = 7 mg L^?1, EC_50(2,5-DBBQ) = 19 mg L^?1, EC_50(2,6-DBP) = 49 mg L^?1, and EC_50(2,6-DBBQ) = 13 mg L^?1. The toxicity of the chemicals was slightly lower in the presence of HA. The toxicity of TBBPA decomposed by a biomimetic catalytic system consisting of iron (III) 5,10,15,20-tetrakis (p-sulfonatophenyl) porphyrin (Fe(III)-TPPS) and KHSO₅ was also evaluated using P. subcapitata and Chlamydomonas reinhardtii.     

Degradation of bisphenol A by photo-fenton processes

The photo-Fenton reactions, which could yield hydroxyl radicals via the catalytic degradation of H₂O₂ by Fe(II), were focused as one of the abiotic degradation processes of bisphenol A (BPA) in surface waters. At pH 6, in the presence of H₂O₂ only, 32% of BPA was degraded after 120?min of irradiation. However, 97% of BPA was degraded in the presence of both H₂O₂ and Fe(II). Without light irradiation, no BPA degradation was observed even in the presence of Fe(II) and H₂O₂. These results show that photo-Fenton processes are effective in the natural attenuation of BPA in surface water. In addition, the presence of humic acids (HAs), which were of more aliphatic nature, resulted in enhancing BPA degradation via the photo-Fenton processes. Therefore, HAs can be one of the important factors in enhancing the degradation of BPA in surface water via the photo-Fenton processes.